[Tue Jun 25 16:58:41 2013] Detection parameters:
  Position = (288.0, 264.1) = 8 3 33.88 -40 1 17.4
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 205.6 +/- 29.4
  Background counts = 63.2
  Rate = 0.007 +/- 0.001

[Tue Jun 25 16:58:41 2013] Off-axis axis estimate = 2.60'
[Tue Jun 25 17:13:19 2013] Using EEF radius (= 7.73 ")to estimate initial spatial extent for simple fitting
[Tue Jun 25 17:13:19 2013] Initial guess for spatial extent in simple fitting = 7.73"
[Tue Jun 25 17:13:19 2013] source mask rpix=1.8, npix_max = 20, mask sum = 16, frac = 0.772
[Tue Jun 25 17:13:19 2013] Giving source the simple spatial ID 9 for pass 0, mean size = 7.73"
[Tue Jun 25 18:42:55 2013] fullrun_pn_xmm0095810401_pi300-10000_cl_pass0_src9.ximg exists
[Tue Jun 25 18:42:55 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0095810401_pi300-10000_cl_pass0_src9.csv
[Tue Jun 25 18:42:55 2013] fullrun_pn_xmm0095810401_pi300-10000_cl_pass0_src9_1.ximg exists
[Tue Jun 25 18:42:55 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0095810401_pi300-10000_cl_pass0_src9.csv
[Tue Jun 25 18:42:55 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0095810401_pi300-10000_cl_pass0_src9_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0095810401_pi300-10000_cl_pass0_src9.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jun 25 18:42:56 2013] fullrun_pn_xmm0095810401_pi300-10000_cl_pass0_tfrozen_src9.ximg exists
[Tue Jun 25 18:42:56 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0095810401_pi300-10000_cl_pass0_tfrozen_src9.csv
[Tue Jun 25 18:42:56 2013] fullrun_pn_xmm0095810401_pi300-10000_cl_pass0_tfrozen_src9_1.ximg exists
[Tue Jun 25 18:42:56 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0095810401_pi300-10000_cl_pass0_tfrozen_src9.csv
[Tue Jun 25 18:42:56 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0095810401_pi300-10000_cl_pass0_tfrozen_src9_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0095810401_pi300-10000_cl_pass0_tfrozen_src9.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jun 25 20:35:45 2013] Source 11 is offset by 6.951092 and -3.045636 pixels which is larger than
2 X fitted extent = 1.149807 x 1.149807, not incorporating fit results
[Tue Jun 25 20:35:45 2013] Vigneting correction estimate = 1.000000
[Tue Jun 25 20:35:45 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Jun 25 20:35:45 2013] Assessing source extent using major
[Tue Jun 25 20:35:45 2013] Source does appear to be extended
[Tue Jun 25 20:35:45 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Jun 25 20:36:06 2013] Using EEF radius (= 7.73 ")to estimate initial spatial extent for simple fitting
[Tue Jun 25 20:36:06 2013] Initial guess for spatial extent in simple fitting = 7.73"
[Tue Jun 25 20:36:06 2013] source mask rpix=1.8, npix_max = 20, mask sum = 16, frac = 0.772
[Tue Jun 25 20:36:06 2013] Giving source the simple spatial ID 9 for pass 1, mean size = 7.73"
[Tue Jun 25 21:01:09 2013] fullrun_pn_xmm0095810401_pi300-10000_cl_pass1_src9.ximg exists
[Tue Jun 25 21:01:09 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0095810401_pi300-10000_cl_pass1_src9.csv
[Tue Jun 25 21:01:09 2013] fullrun_pn_xmm0095810401_pi300-10000_cl_pass1_src9_1.ximg exists
[Tue Jun 25 21:01:09 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0095810401_pi300-10000_cl_pass1_src9.csv
[Tue Jun 25 21:01:09 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0095810401_pi300-10000_cl_pass1_src9_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0095810401_pi300-10000_cl_pass1_src9.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jun 25 21:01:10 2013] fullrun_pn_xmm0095810401_pi300-10000_cl_pass1_tfrozen_src9.ximg exists
[Tue Jun 25 21:01:10 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0095810401_pi300-10000_cl_pass1_tfrozen_src9.csv
[Tue Jun 25 21:01:10 2013] fullrun_pn_xmm0095810401_pi300-10000_cl_pass1_tfrozen_src9_1.ximg exists
[Tue Jun 25 21:01:10 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0095810401_pi300-10000_cl_pass1_tfrozen_src9.csv
[Tue Jun 25 21:01:10 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0095810401_pi300-10000_cl_pass1_tfrozen_src9_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0095810401_pi300-10000_cl_pass1_tfrozen_src9.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jun 25 22:18:14 2013] Source 11 is offset by 3.365138 and -7.508717 pixels which is larger than
2 X fitted extent = 7.106851 x 0.891903, not incorporating fit results
[Tue Jun 25 22:18:14 2013] Vigneting correction estimate = 1.000000
[Tue Jun 25 22:18:14 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Jun 25 22:18:14 2013] Assessing source extent using major
[Tue Jun 25 22:18:14 2013] Source does appear to be extended
[Tue Jun 25 22:18:14 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Jun 25 22:18:22 2013] XMMSAS src. selection expression = ellipse(25011.386963, 22929.015625, 652.500000, 652.500000, 0.000000, X, Y)
[Tue Jun 25 22:18:22 2013] Writing source region out to fullrun_pn_xmm0095810401_pi300-10000_pass1_cl_src11_src.reg
[Tue Jun 25 22:18:22 2013] Extracting stamp from image fullrun_pn_xmm0095810401_pi300-10000_cl_sm2.00.img.gz, (251, 227) - (326, 302)
[Tue Jun 25 22:18:22 2013] XMMSAS bgd. selection expression = annulus(25011.386963, 22929.015625, 1087.500000, 2175.000000, X, Y) && !ellipse(24240.945251, 20076.201248, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24730.018000, 24346.075800, 1636.996847, 1619.392847, 29.374718, X, Y)
[Tue Jun 25 22:18:22 2013] Writing fullrun_pn_xmm0095810401_pi300-10000_pass1_cl_src11.gif
[Tue Jun 25 22:42:49 2013] Mean detx,y = (-25.04, -1372.00) 
[Tue Jun 25 22:42:52 2013] Setting backscal keywords in source and bgd. spectrum
[Tue Jun 25 22:43:18 2013] Binned source spectrum to 10 counts/bin
[Tue Jun 25 22:43:18 2013] Setting source spectrum file to fullrun_pn_xmm0095810401_pi300-10000_pass1_cl_src11_src_b10.pi.gz
[Tue Jun 25 22:43:18 2013] Setting bgd. spectrum file to fullrun_pn_xmm0095810401_pi300-10000_pass1_cl_src11_bgd.pi.gz
[Tue Jun 25 22:53:33 2013] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Tue Jun 25 22:53:33 2013] rmf not generated due to insufficient counts
[Tue Jun 25 23:35:00 2013] Updating aperture counts using extracted products
[Tue Jun 25 23:35:00 2013] Total counts from fullrun_pn_xmm0095810401_pi300-10000_pass1_cl_src11_src_b10.pi.gz = 2589.00
[Tue Jun 25 23:35:00 2013] Total counts from fullrun_pn_xmm0095810401_pi300-10000_pass1_cl_src11_bgd.pi.gz = 4019.00
[Tue Jun 25 23:35:00 2013] Got source and background scale factors 1049179.000000, 6430890.000000
[Tue Jun 25 23:35:00 2013] User source parameters:
  Position = (288.0, 264.1) = 8 3 33.88 -40 1 17.4
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 1933.3 +/- 51.9
  Background aperture counts = 655.7
  Rate = 0.05 +/- 0.001

[Tue Jun 25 23:35:00 2013] Updating counts from extracted products
[Tue Jun 25 23:35:00 2013] Set source signif. to 1933.31/25.61 = 75.50
[Tue Jun 25 23:35:01 2013] Calculating source flux in energy range 0.30-8.00
[Tue Jun 25 23:35:01 2013] Using photon index=1.80, rate=0.0545, arf fullrun_pn_xmm0095810401_pi300-10000_pass1_cl_src11.arf
[Tue Jun 25 23:35:01 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Tue Jun 25 23:35:01 2013] Updating source flux to 2.8e-13
[Tue Jun 25 23:35:07 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Tue Jun 25 23:35:09 2013] xmm0095810401/analysis//spectral/fullrun_pn_xmm0095810401_pi300-10000_pass1_cl_src11_pl.csv not found, spectral fit skipped or did not complete