[Tue Jun 25 16:59:27 2013] Detection parameters:
  Position = (276.0, 287.0) = 8 3 38.43 -39 59 40.5
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 248.8 +/- 28.4
  Background counts = 14.0
  Rate = 0.008 +/- 0.0009

[Tue Jun 25 16:59:27 2013] Off-axis axis estimate = 1.82'
[Tue Jun 25 19:14:39 2013] Using EEF radius (= 7.34 ")to estimate initial spatial extent for simple fitting
[Tue Jun 25 19:14:39 2013] Initial guess for spatial extent in simple fitting = 7.34"
[Tue Jun 25 19:14:39 2013] source mask rpix=1.7, npix_max = 19, mask sum = 12, frac = 0.627
[Tue Jun 25 19:14:39 2013] Giving source the simple spatial ID 3 for pass 0, mean size = 7.34"
[Tue Jun 25 20:35:35 2013] fullrun_mos2_xmm0095810401_pi300-10000_cl_pass0_src3.ximg exists
[Tue Jun 25 20:35:35 2013] fullrun_mos2_xmm0095810401_pi300-10000_cl_pass0_src3_1.ximg exists
[Tue Jun 25 20:35:35 2013] Fit fullrun_mos2_xmm0095810401_pi300-10000_cl_pass0_src3 appears to have run properly
[Tue Jun 25 20:35:36 2013] fullrun_mos2_xmm0095810401_pi300-10000_cl_pass0_tfrozen_src3.ximg exists
[Tue Jun 25 20:35:36 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0095810401_pi300-10000_cl_pass0_tfrozen_src3.csv
[Tue Jun 25 20:35:36 2013] fullrun_mos2_xmm0095810401_pi300-10000_cl_pass0_tfrozen_src3_1.ximg exists
[Tue Jun 25 20:35:36 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0095810401_pi300-10000_cl_pass0_tfrozen_src3.csv
[Tue Jun 25 20:35:36 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0095810401_pi300-10000_cl_pass0_tfrozen_src3_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0095810401_pi300-10000_cl_pass0_tfrozen_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jun 25 20:35:56 2013] Warning, spatial fit 3 centroid is now closest to src. 6
[Tue Jun 25 20:35:56 2013] Spatial fit model total counts = 2480.090000, observed total counts = 1887.000000
[Tue Jun 25 20:35:56 2013] Poor agreement between spatial fit and data for source 4
It may help to tweak spatial fit manually
Not incorporating fit results
[Tue Jun 25 20:35:56 2013] Vigneting correction estimate = 1.000000
[Tue Jun 25 20:35:56 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Jun 25 20:35:56 2013] Assessing source extent using major
[Tue Jun 25 20:35:56 2013] Source does appear to be extended
[Tue Jun 25 20:35:56 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Jun 25 20:35:56 2013] Source is confused with source 6
[Tue Jun 25 21:07:34 2013] Using EEF radius (= 7.34 ")to estimate initial spatial extent for simple fitting
[Tue Jun 25 21:07:34 2013] Initial guess for spatial extent in simple fitting = 7.34"
[Tue Jun 25 21:07:34 2013] source mask rpix=1.7, npix_max = 19, mask sum = 12, frac = 0.627
[Tue Jun 25 21:07:34 2013] Giving source the simple spatial ID 3 for pass 1, mean size = 7.34"
[Tue Jun 25 22:18:11 2013] fullrun_mos2_xmm0095810401_pi300-10000_cl_pass1_src3.ximg exists
[Tue Jun 25 22:18:11 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0095810401_pi300-10000_cl_pass1_src3.csv
[Tue Jun 25 22:18:11 2013] fullrun_mos2_xmm0095810401_pi300-10000_cl_pass1_src3_1.ximg exists
[Tue Jun 25 22:18:11 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0095810401_pi300-10000_cl_pass1_src3.csv
[Tue Jun 25 22:18:11 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0095810401_pi300-10000_cl_pass1_src3_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0095810401_pi300-10000_cl_pass1_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jun 25 22:18:11 2013] fullrun_mos2_xmm0095810401_pi300-10000_cl_pass1_tfrozen_src3.ximg exists
[Tue Jun 25 22:18:11 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0095810401_pi300-10000_cl_pass1_tfrozen_src3.csv
[Tue Jun 25 22:18:11 2013] fullrun_mos2_xmm0095810401_pi300-10000_cl_pass1_tfrozen_src3_1.ximg exists
[Tue Jun 25 22:18:11 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0095810401_pi300-10000_cl_pass1_tfrozen_src3.csv
[Tue Jun 25 22:18:11 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0095810401_pi300-10000_cl_pass1_tfrozen_src3_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0095810401_pi300-10000_cl_pass1_tfrozen_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jun 25 22:18:17 2013] Warning, spatial fit 3 centroid is now closest to src. 6
[Tue Jun 25 22:18:17 2013] Spatial fit model total counts = 799.411000, observed total counts = 4624.000000
[Tue Jun 25 22:18:17 2013] Poor agreement between spatial fit and data for source 4
It may help to tweak spatial fit manually
Not incorporating fit results
[Tue Jun 25 22:18:17 2013] Vigneting correction estimate = 1.000000
[Tue Jun 25 22:18:17 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Jun 25 22:18:17 2013] Assessing source extent using major
[Tue Jun 25 22:18:17 2013] Source does appear to be extended
[Tue Jun 25 22:18:17 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Jun 25 23:12:18 2013] XMMSAS src. selection expression = ellipse(23966.319641, 24923.614349, 652.500000, 652.500000, 0.000000, X, Y)
[Tue Jun 25 23:12:18 2013] Writing source region out to fullrun_mos2_xmm0095810401_pi300-10000_pass1_cl_src4_src.reg
[Tue Jun 25 23:12:18 2013] Extracting stamp from image fullrun_mos2_xmm0095810401_pi300-10000_cl_sm2.00.img.gz, (239, 250) - (314, 325)
[Tue Jun 25 23:12:18 2013] XMMSAS bgd. selection expression = annulus(23966.319641, 24923.614349, 1087.500000, 2175.000000, X, Y) && !ellipse(24739.429060, 24353.694800, 1381.466440, 1244.407236, 359.164020, X, Y) && !ellipse(21899.830688, 27005.728149, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23942.408447, 23803.130920, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23142.176000, 26546.142000, 1191.024034, 817.880024, 41.752000, X, Y)
[Tue Jun 25 23:12:18 2013] Writing fullrun_mos2_xmm0095810401_pi300-10000_pass1_cl_src4.gif
[Tue Jun 25 23:16:16 2013] Mean detx,y = (-517.82, -514.43) 
[Tue Jun 25 23:16:17 2013] Setting backscal keywords in source and bgd. spectrum
[Tue Jun 25 23:16:26 2013] Binned source spectrum to 10 counts/bin
[Tue Jun 25 23:16:26 2013] Setting source spectrum file to fullrun_mos2_xmm0095810401_pi300-10000_pass1_cl_src4_src_b10.pi.gz
[Tue Jun 25 23:16:26 2013] Setting bgd. spectrum file to fullrun_mos2_xmm0095810401_pi300-10000_pass1_cl_src4_bgd.pi.gz
[Tue Jun 25 23:29:40 2013] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Tue Jun 25 23:29:40 2013] rmf not generated due to insufficient counts
[Tue Jun 25 23:35:02 2013] Updating aperture counts using extracted products
[Tue Jun 25 23:35:02 2013] Total counts from fullrun_mos2_xmm0095810401_pi300-10000_pass1_cl_src4_src_b10.pi.gz = 4186.00
[Tue Jun 25 23:35:02 2013] Total counts from fullrun_mos2_xmm0095810401_pi300-10000_pass1_cl_src4_bgd.pi.gz = 1528.00
[Tue Jun 25 23:35:02 2013] Got source and background scale factors 1152524.000000, 5250928.000000
[Tue Jun 25 23:35:02 2013] User source parameters:
  Position = (276.0, 287.0) = 8 3 38.43 -39 59 40.5
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 3850.6 +/- 65.7
  Background aperture counts = 335.4
  Rate = 0.1 +/- 0.002

[Tue Jun 25 23:35:02 2013] Updating counts from extracted products
[Tue Jun 25 23:35:02 2013] Set source signif. to 3850.62/18.31 = 210.26
[Tue Jun 25 23:35:02 2013] Calculating source flux in energy range 0.30-8.00
[Tue Jun 25 23:35:02 2013] Using photon index=1.80, rate=0.102, arf fullrun_mos2_xmm0095810401_pi300-10000_pass1_cl_src4.arf
[Tue Jun 25 23:35:02 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Tue Jun 25 23:35:02 2013] Updating source flux to 1.8e-12
[Tue Jun 25 23:35:05 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Tue Jun 25 23:35:07 2013] xmm0095810401/analysis//spectral/fullrun_mos2_xmm0095810401_pi300-10000_pass1_cl_src4_pl.csv not found, spectral fit skipped or did not complete