[Tue Jun 25 16:59:27 2013] Detection parameters:
  Position = (286.0, 311.0) = 8 3 34.65 -39 57 55.9
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 75.0 +/- 13.5
  Background counts = 13.1
  Rate = 0.002 +/- 0.0004

[Tue Jun 25 16:59:27 2013] Off-axis axis estimate = 1.28'
[Tue Jun 25 19:14:39 2013] Using EEF radius (= 7.07 ")to estimate initial spatial extent for simple fitting
[Tue Jun 25 19:14:39 2013] Initial guess for spatial extent in simple fitting = 7.07"
[Tue Jun 25 19:14:39 2013] source mask rpix=1.6, npix_max = 18, mask sum = 16, frac = 0.886
[Tue Jun 25 19:14:39 2013] Giving source the simple spatial ID 15 for pass 0, mean size = 7.07"
[Tue Jun 25 20:35:35 2013] fullrun_mos2_xmm0095810401_pi300-10000_cl_pass0_src15.ximg exists
[Tue Jun 25 20:35:35 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0095810401_pi300-10000_cl_pass0_src15.csv
[Tue Jun 25 20:35:35 2013] fullrun_mos2_xmm0095810401_pi300-10000_cl_pass0_src15_1.ximg exists
[Tue Jun 25 20:35:35 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0095810401_pi300-10000_cl_pass0_src15.csv
[Tue Jun 25 20:35:35 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0095810401_pi300-10000_cl_pass0_src15_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0095810401_pi300-10000_cl_pass0_src15.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jun 25 20:35:36 2013] fullrun_mos2_xmm0095810401_pi300-10000_cl_pass0_tfrozen_src15.ximg exists
[Tue Jun 25 20:35:36 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0095810401_pi300-10000_cl_pass0_tfrozen_src15.csv
[Tue Jun 25 20:35:36 2013] fullrun_mos2_xmm0095810401_pi300-10000_cl_pass0_tfrozen_src15_1.ximg exists
[Tue Jun 25 20:35:36 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0095810401_pi300-10000_cl_pass0_tfrozen_src15.csv
[Tue Jun 25 20:35:36 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0095810401_pi300-10000_cl_pass0_tfrozen_src15_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0095810401_pi300-10000_cl_pass0_tfrozen_src15.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jun 25 20:35:56 2013] Spatial fit model total counts = 465.620000, observed total counts = 392.000000
[Tue Jun 25 20:35:56 2013] Poor agreement between spatial fit and data for source 14
It may help to tweak spatial fit manually
Not incorporating fit results
[Tue Jun 25 20:35:56 2013] Vigneting correction estimate = 1.000000
[Tue Jun 25 20:35:56 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Jun 25 20:35:56 2013] Assessing source extent using major
[Tue Jun 25 20:35:56 2013] Source does appear to be extended
[Tue Jun 25 20:35:56 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Jun 25 20:35:56 2013] Deleting source due to low Poisson probability 0.9