[Tue Jun 25 16:59:27 2013] Detection parameters:
  Position = (284.9, 280.3) = 8 3 35.09 -40 0 10.6
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 87799.4 +/- 347.3
  Background counts = 14.0
  Rate = 2 +/- 0.01

[Tue Jun 25 16:59:27 2013] Off-axis axis estimate = 1.65'
[Tue Jun 25 19:14:39 2013] Using EEF radius (= 7.25 ")to estimate initial spatial extent for simple fitting
[Tue Jun 25 19:14:39 2013] Initial guess for spatial extent in simple fitting = 7.25"
[Tue Jun 25 19:14:39 2013] source mask rpix=1.7, npix_max = 18, mask sum = 16, frac = 0.852
[Tue Jun 25 19:14:39 2013] Giving source the simple spatial ID 1 for pass 0, mean size = 7.25"
[Tue Jun 25 20:35:35 2013] fullrun_mos2_xmm0095810401_pi300-10000_cl_pass0_src1.ximg exists
[Tue Jun 25 20:35:35 2013] fullrun_mos2_xmm0095810401_pi300-10000_cl_pass0_src1_1.ximg exists
[Tue Jun 25 20:35:35 2013] Fit fullrun_mos2_xmm0095810401_pi300-10000_cl_pass0_src1 appears to have run properly
[Tue Jun 25 20:35:36 2013] fullrun_mos2_xmm0095810401_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Tue Jun 25 20:35:36 2013] fullrun_mos2_xmm0095810401_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Tue Jun 25 20:35:36 2013] Fit fullrun_mos2_xmm0095810401_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Tue Jun 25 20:35:56 2013] Spatial fit model total counts = 81928.800000, observed total counts = 76691.000000
[Tue Jun 25 20:35:56 2013] Offset between fit and detection position for source 1 = 0.232322 pixels
[Tue Jun 25 20:35:56 2013] 81462.000000 total counts/ 20893.500000 bgd. counts: snr = 419.026240
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.232322 pixels
  Position = (284.9, 280.5) = 8 3 35.07 -40 0 11.0
  Extent = 5.8 (5.7-5.8)" x 5.2 (5.1-5.2)", rotation angle = 359 (356-2) degrees
  Source counts = 60568.5 +/- 285.4
  Background counts = 20893.5
  Rate = 2 +/- 0.008
[Tue Jun 25 20:35:56 2013] Vigneting correction estimate = 1.000000
[Tue Jun 25 20:35:56 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Jun 25 20:35:56 2013] Assessing source extent using major axis lower bound
[Tue Jun 25 20:35:56 2013] Source does appear to be extended
[Tue Jun 25 20:35:56 2013] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 1.09
[Tue Jun 25 21:07:34 2013] Using previous fit value to estimate initial spatial extent for simple fitting
[Tue Jun 25 21:07:34 2013] Initial guess for spatial extent in simple fitting = 5.47"
[Tue Jun 25 21:07:34 2013] source mask rpix=1.3, npix_max = 12, mask sum = 12, frac = 0.971
[Tue Jun 25 21:07:34 2013] Giving source the simple spatial ID 1 for pass 1, mean size = 5.47"
[Tue Jun 25 22:18:11 2013] fullrun_mos2_xmm0095810401_pi300-10000_cl_pass1_src1.ximg exists
[Tue Jun 25 22:18:11 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0095810401_pi300-10000_cl_pass1_src1.csv
[Tue Jun 25 22:18:11 2013] fullrun_mos2_xmm0095810401_pi300-10000_cl_pass1_src1_1.ximg exists
[Tue Jun 25 22:18:11 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0095810401_pi300-10000_cl_pass1_src1.csv
[Tue Jun 25 22:18:11 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0095810401_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0095810401_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jun 25 22:18:11 2013] fullrun_mos2_xmm0095810401_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Tue Jun 25 22:18:11 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0095810401_pi300-10000_cl_pass1_tfrozen_src1.csv
[Tue Jun 25 22:18:11 2013] fullrun_mos2_xmm0095810401_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Tue Jun 25 22:18:11 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0095810401_pi300-10000_cl_pass1_tfrozen_src1.csv
[Tue Jun 25 22:18:11 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0095810401_pi300-10000_cl_pass1_tfrozen_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0095810401_pi300-10000_cl_pass1_tfrozen_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jun 25 22:18:17 2013] Warning, spatial fit 1 centroid is now closest to src. 6
[Tue Jun 25 22:18:17 2013] Vigneting correction estimate = 1.000000
[Tue Jun 25 22:18:17 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Jun 25 22:18:17 2013] Assessing source extent using major axis lower bound
[Tue Jun 25 22:18:17 2013] Source does appear to be extended
[Tue Jun 25 22:18:17 2013] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 1.09
[Tue Jun 25 23:12:18 2013] Counts = 60568.500000, rescaling region sizes by 3.000000
[Tue Jun 25 23:12:18 2013] XMMSAS src. selection expression = ellipse(24739.429060, 24353.694800, 1036.099830, 933.305427, 359.164020, X, Y)
[Tue Jun 25 23:12:18 2013] Writing source region out to fullrun_mos2_xmm0095810401_pi300-10000_pass1_cl_src1_src.reg
[Tue Jun 25 23:12:18 2013] Extracting stamp from image fullrun_mos2_xmm0095810401_pi300-10000_cl_sm2.00.img.gz, (225, 221) - (344, 340)
[Tue Jun 25 23:12:18 2013] XMMSAS bgd. selection expression = annulus(24739.429060, 24353.694800, 5180.499149, 10360.998298, X, Y) && !ellipse(21899.830688, 27005.728149, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23966.319641, 24923.614349, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23942.408447, 23803.130920, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23142.176000, 26546.142000, 1191.024034, 817.880024, 41.752000, X, Y)
[Tue Jun 25 23:12:18 2013] Writing fullrun_mos2_xmm0095810401_pi300-10000_pass1_cl_src1.gif
[Tue Jun 25 23:12:25 2013] Mean detx,y = (-17.51, -105.94) 
[Tue Jun 25 23:12:27 2013] Setting backscal keywords in source and bgd. spectrum
[Tue Jun 25 23:15:45 2013] Binned source spectrum to 10 counts/bin
[Tue Jun 25 23:15:45 2013] Setting source spectrum file to fullrun_mos2_xmm0095810401_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Tue Jun 25 23:15:45 2013] Setting bgd. spectrum file to fullrun_mos2_xmm0095810401_pi300-10000_pass1_cl_src1_bgd.pi.gz
[Tue Jun 25 23:35:01 2013] Updating aperture counts using extracted products
[Tue Jun 25 23:35:01 2013] Total counts from fullrun_mos2_xmm0095810401_pi300-10000_pass1_cl_src1_src_b10.pi.gz = 79448.00
[Tue Jun 25 23:35:01 2013] Total counts from fullrun_mos2_xmm0095810401_pi300-10000_pass1_cl_src1_bgd.pi.gz = 6845.00
[Tue Jun 25 23:35:01 2013] Got source and background scale factors 2793120.000000, 147107374.000000
[Tue Jun 25 23:35:01 2013] User source parameters:
  Position = (284.9, 280.5) = 8 3 35.07 -40 0 11.0
  Extent = 5.8 (5.7-5.8)" x 5.2 (5.1-5.2)", rotation angle = 359 (356-2) degrees
  Source aperture counts = 79318.0 +/- 282.9
  Background aperture counts = 130.0
  Rate = 2 +/- 0.008

[Tue Jun 25 23:35:02 2013] Calculating source flux in energy range 0.30-8.00
[Tue Jun 25 23:35:02 2013] Using photon index=1.80, rate=1.61, arf fullrun_mos2_xmm0095810401_pi300-10000_pass1_cl_src1.arf
[Tue Jun 25 23:35:02 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Tue Jun 25 23:35:02 2013] Updating source flux to 2.5e-11
[Tue Jun 25 23:35:07 2013] xmm0095810401/analysis//spectral/fullrun_mos2_xmm0095810401_pi300-10000_pass1_cl_src1_pl.csv not found, spectral fit skipped or did not complete