[Tue Jun 25 16:59:04 2013] Detection parameters:
  Position = (252.2, 311.0) = 8 3 47.46 -39 57 57.8
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 297.2 +/- 21.3
  Background counts = 10.1
  Rate = 0.009 +/- 0.0006

[Tue Jun 25 16:59:04 2013] Off-axis axis estimate = 3.48'
[Tue Jun 25 18:42:56 2013] Using EEF radius (= 8.17 ")to estimate initial spatial extent for simple fitting
[Tue Jun 25 18:42:56 2013] Initial guess for spatial extent in simple fitting = 8.17"
[Tue Jun 25 18:42:56 2013] source mask rpix=1.9, npix_max = 22, mask sum = 20, frac = 0.885
[Tue Jun 25 18:42:56 2013] Giving source the simple spatial ID 2 for pass 0, mean size = 8.17"
[Tue Jun 25 19:14:38 2013] fullrun_mos1_xmm0095810401_pi300-10000_cl_pass0_src2.ximg exists
[Tue Jun 25 19:14:38 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0095810401_pi300-10000_cl_pass0_src2.csv
[Tue Jun 25 19:14:38 2013] fullrun_mos1_xmm0095810401_pi300-10000_cl_pass0_src2_1.ximg exists
[Tue Jun 25 19:14:38 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0095810401_pi300-10000_cl_pass0_src2.csv
[Tue Jun 25 19:14:38 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0095810401_pi300-10000_cl_pass0_src2_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0095810401_pi300-10000_cl_pass0_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jun 25 19:14:38 2013] fullrun_mos1_xmm0095810401_pi300-10000_cl_pass0_tfrozen_src2.ximg exists
[Tue Jun 25 19:14:38 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0095810401_pi300-10000_cl_pass0_tfrozen_src2.csv
[Tue Jun 25 19:14:38 2013] fullrun_mos1_xmm0095810401_pi300-10000_cl_pass0_tfrozen_src2_1.ximg exists
[Tue Jun 25 19:14:38 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0095810401_pi300-10000_cl_pass0_tfrozen_src2.csv
[Tue Jun 25 19:14:38 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0095810401_pi300-10000_cl_pass0_tfrozen_src2_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0095810401_pi300-10000_cl_pass0_tfrozen_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jun 25 20:35:50 2013] Warning: source 2 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 4 at 11.273231 pixels away
[Tue Jun 25 20:35:50 2013] Vigneting correction estimate = 1.000000
[Tue Jun 25 20:35:50 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Jun 25 20:35:50 2013] Assessing source extent using major
[Tue Jun 25 20:35:50 2013] Source does appear to be extended
[Tue Jun 25 20:35:50 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Jun 25 21:01:10 2013] Using EEF radius (= 8.17 ")to estimate initial spatial extent for simple fitting
[Tue Jun 25 21:01:10 2013] Initial guess for spatial extent in simple fitting = 8.17"
[Tue Jun 25 21:01:10 2013] source mask rpix=1.9, npix_max = 22, mask sum = 20, frac = 0.885
[Tue Jun 25 21:01:10 2013] Giving source the simple spatial ID 2 for pass 1, mean size = 8.17"
[Tue Jun 25 21:07:34 2013] fullrun_mos1_xmm0095810401_pi300-10000_cl_pass1_src2.ximg exists
[Tue Jun 25 21:07:34 2013] fullrun_mos1_xmm0095810401_pi300-10000_cl_pass1_src2_1.ximg exists
[Tue Jun 25 21:07:34 2013] Fit fullrun_mos1_xmm0095810401_pi300-10000_cl_pass1_src2 appears to have run properly
[Tue Jun 25 21:07:34 2013] fullrun_mos1_xmm0095810401_pi300-10000_cl_pass1_tfrozen_src2.ximg exists
[Tue Jun 25 21:07:34 2013] fullrun_mos1_xmm0095810401_pi300-10000_cl_pass1_tfrozen_src2_1.ximg exists
[Tue Jun 25 21:07:34 2013] Fit fullrun_mos1_xmm0095810401_pi300-10000_cl_pass1_tfrozen_src2 appears to have run properly
[Tue Jun 25 22:18:15 2013] Spatial fit model total counts = 383.506000, observed total counts = 360.000000
[Tue Jun 25 22:18:15 2013] Offset between fit and detection position for source 4 = 0.111985 pixels
[Tue Jun 25 22:18:15 2013] 387.557000 total counts/ 183.613000 bgd. counts: snr = 15.050787
Spatial fit parameters:
  Offset between fit and detection position for source 4 = 0.111985 pixels
  Position = (252.0, 311.0) = 8 3 47.50 -39 57 58.4
  Extent = 5.3 (4.8-6.1)", rotation angle = 0
  Source counts = 203.9 +/- 19.7
  Background counts = 183.6
  Rate = 0.005 +/- 0.0005
[Tue Jun 25 22:18:15 2013] Vigneting correction estimate = 1.000000
[Tue Jun 25 22:18:15 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Jun 25 22:18:15 2013] Assessing source extent using major axis lower bound
[Tue Jun 25 22:18:15 2013] Source does appear to be extended
[Tue Jun 25 22:18:15 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Jun 25 22:59:05 2013] XMMSAS src. selection expression = ellipse(21879.707660, 27004.835200, 319.509009, 319.509009, 0.000000, X, Y)
[Tue Jun 25 22:59:05 2013] Writing source region out to fullrun_mos1_xmm0095810401_pi300-10000_pass1_cl_src4_src.reg
[Tue Jun 25 22:59:05 2013] Extracting stamp from image fullrun_mos1_xmm0095810401_pi300-10000_cl_sm2.00.img.gz, (234, 293) - (270, 329)
[Tue Jun 25 22:59:06 2013] XMMSAS bgd. selection expression = annulus(21879.707660, 27004.835200, 532.515015, 1065.030031, X, Y)
[Tue Jun 25 22:59:06 2013] Writing fullrun_mos1_xmm0095810401_pi300-10000_pass1_cl_src4.gif
[Tue Jun 25 23:03:06 2013] Mean detx,y = (-2616.44, 2631.95) 
[Tue Jun 25 23:03:07 2013] Setting backscal keywords in source and bgd. spectrum
[Tue Jun 25 23:03:24 2013] Binned source spectrum to 10 counts/bin
[Tue Jun 25 23:03:24 2013] Setting source spectrum file to fullrun_mos1_xmm0095810401_pi300-10000_pass1_cl_src4_src_b10.pi.gz
[Tue Jun 25 23:03:24 2013] Setting bgd. spectrum file to fullrun_mos1_xmm0095810401_pi300-10000_pass1_cl_src4_bgd.pi.gz
[Tue Jun 25 23:35:01 2013] Updating aperture counts using extracted products
[Tue Jun 25 23:35:01 2013] Total counts from fullrun_mos1_xmm0095810401_pi300-10000_pass1_cl_src4_src_b10.pi.gz = 232.00
[Tue Jun 25 23:35:01 2013] Total counts from fullrun_mos1_xmm0095810401_pi300-10000_pass1_cl_src4_bgd.pi.gz = 164.00
[Tue Jun 25 23:35:01 2013] Got source and background scale factors 326400.000000, 1586296.000000
[Tue Jun 25 23:35:01 2013] User source parameters:
  Position = (252.0, 311.0) = 8 3 47.50 -39 57 58.4
  Extent = 5.3 (4.8-6.1)", rotation angle = 0
  Source aperture counts = 198.3 +/- 16.3
  Background aperture counts = 33.7
  Rate = 0.005 +/- 0.0004

[Tue Jun 25 23:35:01 2013] Calculating source flux in energy range 0.30-8.00
[Tue Jun 25 23:35:01 2013] Using photon index=1.80, rate=0.00541, arf fullrun_mos1_xmm0095810401_pi300-10000_pass1_cl_src4.arf
[Tue Jun 25 23:35:01 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Tue Jun 25 23:35:01 2013] Updating source flux to 1.1e-13
[Tue Jun 25 23:35:05 2013] xmm0095810401/analysis//spectral/fullrun_mos1_xmm0095810401_pi300-10000_pass1_cl_src4_pl.csv not found, spectral fit skipped or did not complete