[Sun Jul  8 01:14:56 2012] Detection parameters:
  Position = (226.7, 326.1) = 4 33 58.41 -13 4 19.7
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 73.4 +/- 15.5
  Background counts = 78.3
  Rate = 0.01 +/- 0.002

[Sun Jul  8 01:14:56 2012] Off-axis axis estimate = 5.57'
[Sun Jul  8 01:40:29 2012] Using EEF radius (= 9.22 ")to estimate initial spatial extent for simple fitting
[Sun Jul  8 01:40:29 2012] Initial guess for spatial extent in simple fitting = 9.22"
[Sun Jul  8 01:40:29 2012] source mask rpix=2.1, npix_max = 27, mask sum = 25, frac = 0.912
[Sun Jul  8 01:40:29 2012] Giving source the simple spatial ID 3 for pass 0, mean size = 9.22"
[Sun Jul  8 01:56:16 2012] fullrun_mos1_xmm0095011301_pi300-10000_cl_pass0_src3.ximg exists
[Sun Jul  8 01:56:16 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0095011301_pi300-10000_cl_pass0_src3.csv
[Sun Jul  8 01:56:16 2012] fullrun_mos1_xmm0095011301_pi300-10000_cl_pass0_src3_1.ximg exists
[Sun Jul  8 01:56:16 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0095011301_pi300-10000_cl_pass0_src3.csv
[Sun Jul  8 01:56:16 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0095011301_pi300-10000_cl_pass0_src3_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0095011301_pi300-10000_cl_pass0_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jul  8 01:56:16 2012] fullrun_mos1_xmm0095011301_pi300-10000_cl_pass0_tfrozen_src3.ximg exists
[Sun Jul  8 01:56:16 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0095011301_pi300-10000_cl_pass0_tfrozen_src3.csv
[Sun Jul  8 01:56:16 2012] fullrun_mos1_xmm0095011301_pi300-10000_cl_pass0_tfrozen_src3_1.ximg exists
[Sun Jul  8 01:56:16 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0095011301_pi300-10000_cl_pass0_tfrozen_src3.csv
[Sun Jul  8 01:56:16 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0095011301_pi300-10000_cl_pass0_tfrozen_src3_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0095011301_pi300-10000_cl_pass0_tfrozen_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jul  8 02:14:25 2012] Warning: source 3 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 4 at 15.785559 pixels away
[Sun Jul  8 02:14:25 2012] Vigneting correction estimate = 1.000000
[Sun Jul  8 02:14:25 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Jul  8 02:14:25 2012] Assessing source extent using major
[Sun Jul  8 02:14:25 2012] Source does appear to be extended
[Sun Jul  8 02:14:25 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Jul  8 02:14:25 2012] Deleting source due to low Poisson probability 0.9