[Fri May 31 02:53:36 2013] Detection parameters:
  Position = (342.8, 217.9) = 4 32 46.45 -13 23 0.9
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 70.8 +/- 13.4
  Background counts = 37.3
  Rate = 0.004 +/- 0.0007

[Fri May 31 02:53:36 2013] Off-axis axis estimate = 6.67'
[Fri May 31 03:02:05 2013] Using EEF radius (= 9.76 ")to estimate initial spatial extent for simple fitting
[Fri May 31 03:02:05 2013] Initial guess for spatial extent in simple fitting = 9.76"
[Fri May 31 03:02:05 2013] source mask rpix=2.2, npix_max = 30, mask sum = 36, frac = 1.195
[Fri May 31 03:02:05 2013] Giving source the simple spatial ID 71 for pass 0, mean size = 9.76"
[Fri May 31 07:36:21 2013] fullrun_pn_xmm0095011101_pi300-10000_cl_pass0_src71.ximg exists
[Fri May 31 07:36:21 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0095011101_pi300-10000_cl_pass0_src71.csv
[Fri May 31 07:36:21 2013] fullrun_pn_xmm0095011101_pi300-10000_cl_pass0_src71_1.ximg exists
[Fri May 31 07:36:21 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0095011101_pi300-10000_cl_pass0_src71.csv
[Fri May 31 07:36:21 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0095011101_pi300-10000_cl_pass0_src71_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0095011101_pi300-10000_cl_pass0_src71.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri May 31 07:36:22 2013] fullrun_pn_xmm0095011101_pi300-10000_cl_pass0_tfrozen_src71.ximg exists
[Fri May 31 07:36:22 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0095011101_pi300-10000_cl_pass0_tfrozen_src71.csv
[Fri May 31 07:36:22 2013] fullrun_pn_xmm0095011101_pi300-10000_cl_pass0_tfrozen_src71_1.ximg exists
[Fri May 31 07:36:22 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0095011101_pi300-10000_cl_pass0_tfrozen_src71.csv
[Fri May 31 07:36:22 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0095011101_pi300-10000_cl_pass0_tfrozen_src71_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0095011101_pi300-10000_cl_pass0_tfrozen_src71.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri May 31 14:30:39 2013] Source 72 is offset by -9.140001 and -1.666045 pixels which is larger than
2 X fitted extent = 1.122078 x 1.122078, not incorporating fit results
[Fri May 31 14:30:40 2013] Vigneting correction estimate = 1.000000
[Fri May 31 14:30:40 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri May 31 14:30:40 2013] Assessing source extent using major
[Fri May 31 14:30:40 2013] Source does appear to be extended
[Fri May 31 14:30:40 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Fri May 31 14:30:40 2013] Deleting source due to low Poisson probability 0.9