[Fri May 31 02:53:36 2013] Detection parameters:
  Position = (434.4, 317.6) = 4 32 19.17 -13 15 46.3
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 46.2 +/- 11.3
  Background counts = 32.0
  Rate = 0.001 +/- 0.0003

[Fri May 31 02:53:36 2013] Off-axis axis estimate = 9.95'
[Fri May 31 03:02:05 2013] Using EEF radius (= 11.41 ")to estimate initial spatial extent for simple fitting
[Fri May 31 03:02:05 2013] Initial guess for spatial extent in simple fitting = 11.41"
[Fri May 31 03:02:05 2013] source mask rpix=2.6, npix_max = 38, mask sum = 49, frac = 1.257
[Fri May 31 03:02:05 2013] Giving source the simple spatial ID 67 for pass 0, mean size = 11.41"
[Fri May 31 07:36:20 2013] fullrun_pn_xmm0095011101_pi300-10000_cl_pass0_src67.ximg exists
[Fri May 31 07:36:21 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0095011101_pi300-10000_cl_pass0_src67.csv
[Fri May 31 07:36:21 2013] fullrun_pn_xmm0095011101_pi300-10000_cl_pass0_src67_1.ximg exists
[Fri May 31 07:36:21 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0095011101_pi300-10000_cl_pass0_src67.csv
[Fri May 31 07:36:21 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0095011101_pi300-10000_cl_pass0_src67_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0095011101_pi300-10000_cl_pass0_src67.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri May 31 07:36:22 2013] fullrun_pn_xmm0095011101_pi300-10000_cl_pass0_tfrozen_src67.ximg exists
[Fri May 31 07:36:22 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0095011101_pi300-10000_cl_pass0_tfrozen_src67.csv
[Fri May 31 07:36:22 2013] fullrun_pn_xmm0095011101_pi300-10000_cl_pass0_tfrozen_src67_1.ximg exists
[Fri May 31 07:36:22 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0095011101_pi300-10000_cl_pass0_tfrozen_src67.csv
[Fri May 31 07:36:22 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0095011101_pi300-10000_cl_pass0_tfrozen_src67_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0095011101_pi300-10000_cl_pass0_tfrozen_src67.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri May 31 14:30:39 2013] Source 68 is offset by 1.065099 and -3.791195 pixels which is larger than
2 X fitted extent = 1.296570 x 1.296570, not incorporating fit results
[Fri May 31 14:30:39 2013] Warning: source 67 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 68 at 13.086154 pixels away
[Fri May 31 14:30:40 2013] Vigneting correction estimate = 1.000000
[Fri May 31 14:30:40 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri May 31 14:30:40 2013] Assessing source extent using major
[Fri May 31 14:30:40 2013] Source does appear to be extended
[Fri May 31 14:30:40 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Fri May 31 14:30:40 2013] Deleting source due to low Poisson probability 0.8