[Fri May 31 02:53:35 2013] Detection parameters:
  Position = (399.4, 474.8) = 4 32 29.62 -13 4 24.5
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 93.2 +/- 15.8
  Background counts = 25.5
  Rate = 0.003 +/- 0.0005

[Fri May 31 02:53:36 2013] Off-axis axis estimate = 14.73'
[Fri May 31 03:02:05 2013] Using EEF radius (= 13.80 ")to estimate initial spatial extent for simple fitting
[Fri May 31 03:02:05 2013] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Fri May 31 03:02:05 2013] Initial guess for spatial extent in simple fitting = 13.80"
[Fri May 31 03:02:05 2013] source mask rpix=3.2, npix_max = 53, mask sum = 32, frac = 0.594
[Fri May 31 03:02:05 2013] Giving source the simple spatial ID 52 for pass 0, mean size = 13.80"
[Fri May 31 07:36:20 2013] fullrun_pn_xmm0095011101_pi300-10000_cl_pass0_src52.ximg exists
[Fri May 31 07:36:20 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0095011101_pi300-10000_cl_pass0_src52.csv
[Fri May 31 07:36:20 2013] fullrun_pn_xmm0095011101_pi300-10000_cl_pass0_src52_1.ximg exists
[Fri May 31 07:36:20 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0095011101_pi300-10000_cl_pass0_src52.csv
[Fri May 31 07:36:20 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0095011101_pi300-10000_cl_pass0_src52_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0095011101_pi300-10000_cl_pass0_src52.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri May 31 07:36:22 2013] fullrun_pn_xmm0095011101_pi300-10000_cl_pass0_tfrozen_src52.ximg exists
[Fri May 31 07:36:22 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0095011101_pi300-10000_cl_pass0_tfrozen_src52.csv
[Fri May 31 07:36:22 2013] fullrun_pn_xmm0095011101_pi300-10000_cl_pass0_tfrozen_src52_1.ximg exists
[Fri May 31 07:36:22 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0095011101_pi300-10000_cl_pass0_tfrozen_src52.csv
[Fri May 31 07:36:22 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0095011101_pi300-10000_cl_pass0_tfrozen_src52_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0095011101_pi300-10000_cl_pass0_tfrozen_src52.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri May 31 14:30:39 2013] Source 52 is offset by 0.345532 and 3.873432 pixels which is larger than
2 X fitted extent = 1.554308 x 1.554308, not incorporating fit results
[Fri May 31 14:30:39 2013] Source 52 is offset by -0.937963 and 6.826742 pixels which is larger than
2 X fitted extent = 1.782538 x 1.501899, not incorporating fit results
[Fri May 31 14:30:39 2013] Warning: source 52 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 52 at 17.865667 pixels away
[Fri May 31 14:30:40 2013] Vigneting correction estimate = 1.000000
[Fri May 31 14:30:40 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri May 31 14:30:40 2013] Assessing source extent using major
[Fri May 31 14:30:40 2013] Source does appear to be extended
[Fri May 31 14:30:40 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Fri May 31 14:30:40 2013] Deleting source due to low Poisson probability 1.0