[Fri May 31 02:53:31 2013] Detection parameters:
  Position = (318.0, 395.7) = 4 32 53.85 -13 10 6.8
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 1141.2 +/- 41.2
  Background counts = 72.8
  Rate = 0.06 +/- 0.002

[Fri May 31 02:53:36 2013] Off-axis axis estimate = 7.19'
[Fri May 31 03:02:05 2013] Using EEF radius (= 10.02 ")to estimate initial spatial extent for simple fitting
[Fri May 31 03:02:05 2013] Initial guess for spatial extent in simple fitting = 10.02"
[Fri May 31 03:02:05 2013] source mask rpix=2.3, npix_max = 31, mask sum = 27, frac = 0.858
[Fri May 31 03:02:05 2013] Giving source the simple spatial ID 5 for pass 0, mean size = 10.02"
[Fri May 31 07:36:19 2013] fullrun_pn_xmm0095011101_pi300-10000_cl_pass0_src5.ximg exists
[Fri May 31 07:36:19 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0095011101_pi300-10000_cl_pass0_src5.csv
[Fri May 31 07:36:19 2013] fullrun_pn_xmm0095011101_pi300-10000_cl_pass0_src5_1.ximg exists
[Fri May 31 07:36:19 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0095011101_pi300-10000_cl_pass0_src5.csv
[Fri May 31 07:36:19 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0095011101_pi300-10000_cl_pass0_src5_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0095011101_pi300-10000_cl_pass0_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri May 31 07:36:21 2013] fullrun_pn_xmm0095011101_pi300-10000_cl_pass0_tfrozen_src5.ximg exists
[Fri May 31 07:36:21 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0095011101_pi300-10000_cl_pass0_tfrozen_src5.csv
[Fri May 31 07:36:21 2013] fullrun_pn_xmm0095011101_pi300-10000_cl_pass0_tfrozen_src5_1.ximg exists
[Fri May 31 07:36:21 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0095011101_pi300-10000_cl_pass0_tfrozen_src5.csv
[Fri May 31 07:36:21 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0095011101_pi300-10000_cl_pass0_tfrozen_src5_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0095011101_pi300-10000_cl_pass0_tfrozen_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri May 31 14:30:39 2013] Warning, spatial fit 5 centroid is now closest to src. 21
[Fri May 31 14:30:39 2013] Vigneting correction estimate = 1.000000
[Fri May 31 14:30:39 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri May 31 14:30:39 2013] Assessing source extent using major
[Fri May 31 14:30:39 2013] Source does appear to be extended
[Fri May 31 14:30:39 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Fri May 31 14:31:26 2013] Using EEF radius (= 10.02 ")to estimate initial spatial extent for simple fitting
[Fri May 31 14:31:26 2013] Initial guess for spatial extent in simple fitting = 10.02"
[Fri May 31 14:31:26 2013] source mask rpix=2.3, npix_max = 31, mask sum = 27, frac = 0.858
[Fri May 31 14:31:26 2013] Giving source the simple spatial ID 5 for pass 1, mean size = 10.02"
[Fri May 31 18:20:12 2013] fullrun_pn_xmm0095011101_pi300-10000_cl_pass1_src5.ximg exists
[Fri May 31 18:20:12 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0095011101_pi300-10000_cl_pass1_src5.csv
[Fri May 31 18:20:12 2013] fullrun_pn_xmm0095011101_pi300-10000_cl_pass1_src5_1.ximg exists
[Fri May 31 18:20:12 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0095011101_pi300-10000_cl_pass1_src5.csv
[Fri May 31 18:20:12 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0095011101_pi300-10000_cl_pass1_src5_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0095011101_pi300-10000_cl_pass1_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri May 31 18:20:13 2013] fullrun_pn_xmm0095011101_pi300-10000_cl_pass1_tfrozen_src5.ximg exists
[Fri May 31 18:20:13 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0095011101_pi300-10000_cl_pass1_tfrozen_src5.csv
[Fri May 31 18:20:13 2013] fullrun_pn_xmm0095011101_pi300-10000_cl_pass1_tfrozen_src5_1.ximg exists
[Fri May 31 18:20:13 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0095011101_pi300-10000_cl_pass1_tfrozen_src5.csv
[Fri May 31 18:20:13 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0095011101_pi300-10000_cl_pass1_tfrozen_src5_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0095011101_pi300-10000_cl_pass1_tfrozen_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri May 31 22:47:04 2013] Spatial fit model total counts = 1744.660000, observed total counts = 1580.000000
[Fri May 31 22:47:05 2013] Poor agreement between spatial fit and data for source 5
It may help to tweak spatial fit manually
Not incorporating fit results
[Fri May 31 22:47:05 2013] Vigneting correction estimate = 1.000000
[Fri May 31 22:47:05 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri May 31 22:47:05 2013] Assessing source extent using major
[Fri May 31 22:47:05 2013] Source does appear to be extended
[Fri May 31 22:47:05 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Fri May 31 22:47:34 2013] Counts = 1141.245239, rescaling region sizes by 2.000000
[Fri May 31 22:47:34 2013] XMMSAS src. selection expression = ellipse(27618.646973, 34375.683258, 1305.000000, 1305.000000, 0.000000, X, Y)
[Fri May 31 22:47:34 2013] Writing source region out to fullrun_pn_xmm0095011101_pi300-10000_pass1_cl_src5_src.reg
[Fri May 31 22:47:34 2013] Extracting stamp from image fullrun_pn_xmm0095011101_pi300-10000_cl_sm2.00.img.gz, (243, 321) - (393, 471)
[Fri May 31 22:47:34 2013] XMMSAS bgd. selection expression = annulus(27618.646973, 34375.683258, 4350.000000, 8700.000000, X, Y) && !ellipse(28902.252800, 35024.416200, 501.481614, 399.932012, 358.068300, X, Y) && !ellipse(21859.917633, 36316.384888, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35751.583160, 39812.097351, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25598.980060, 32127.268200, 376.729099, 376.729099, 0.000000, X, Y) && !ellipse(29272.865631, 31360.900146, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18398.724533, 30308.027039, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18022.464000, 27134.490000, 1609.368046, 1609.368046, 0.000000, X, Y) && !ellipse(33816.839417, 26582.689056, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(36739.129272, 30561.030090, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30463.853363, 29962.469666, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(36897.732758, 27529.682251, 870.000000, 870.000000, 0.000000, X, Y)
[Fri May 31 22:47:34 2013] Writing fullrun_pn_xmm0095011101_pi300-10000_pass1_cl_src5.gif
[Fri May 31 23:09:42 2013] Mean detx,y = (1146.36, -6889.62) 
[Fri May 31 23:09:50 2013] Setting backscal keywords in source and bgd. spectrum
[Fri May 31 23:13:10 2013] Binned source spectrum to 10 counts/bin
[Fri May 31 23:13:10 2013] Setting source spectrum file to fullrun_pn_xmm0095011101_pi300-10000_pass1_cl_src5_src_b10.pi.gz
[Fri May 31 23:13:10 2013] Setting bgd. spectrum file to fullrun_pn_xmm0095011101_pi300-10000_pass1_cl_src5_bgd.pi.gz
[Sat Jun  1 00:17:01 2013] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Sat Jun  1 00:17:01 2013] rmf not generated due to insufficient counts
[Sat Jun  1 05:19:07 2013] Updating aperture counts using extracted products
[Sat Jun  1 05:19:07 2013] Total counts from fullrun_pn_xmm0095011101_pi300-10000_pass1_cl_src5_src_b10.pi.gz = 2901.00
[Sat Jun  1 05:19:07 2013] Total counts from fullrun_pn_xmm0095011101_pi300-10000_pass1_cl_src5_bgd.pi.gz = 69886.00
[Sat Jun  1 05:19:07 2013] Got source and background scale factors 4721219.000000, 160336449.000000
[Sat Jun  1 05:19:07 2013] User source parameters:
  Position = (318.0, 395.7) = 4 32 53.85 -13 10 6.8
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 843.2 +/- 54.9
  Background aperture counts = 2057.8
  Rate = 0.02 +/- 0.002

[Sat Jun  1 05:19:07 2013] Updating counts from extracted products
[Sat Jun  1 05:19:07 2013] Set source signif. to 843.16/45.36 = 18.59
[Sat Jun  1 05:19:22 2013] Calculating source flux in energy range 0.30-8.00
[Sat Jun  1 05:19:22 2013] Using photon index=1.80, rate=0.0247, arf fullrun_pn_xmm0095011101_pi300-10000_pass1_cl_src5.arf
[Sat Jun  1 05:19:22 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Jun  1 05:19:22 2013] Updating source flux to 9.1e-14
[Sat Jun  1 05:20:13 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Sat Jun  1 05:20:40 2013] xmm0095011101/analysis//spectral/fullrun_pn_xmm0095011101_pi300-10000_pass1_cl_src5_pl.csv not found, spectral fit skipped or did not complete