[Fri May 31 02:53:35 2013] Detection parameters:
  Position = (168.1, 265.1) = 4 33 38.52 -13 19 32.6
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 162.2 +/- 29.5
  Background counts = 295.9
  Rate = 0.005 +/- 0.0009

[Fri May 31 02:53:36 2013] Off-axis axis estimate = 9.75'
[Fri May 31 03:02:05 2013] Using EEF radius (= 11.31 ")to estimate initial spatial extent for simple fitting
[Fri May 31 03:02:05 2013] Initial guess for spatial extent in simple fitting = 11.31"
[Fri May 31 03:02:05 2013] source mask rpix=2.6, npix_max = 38, mask sum = 36, frac = 0.937
[Fri May 31 03:02:05 2013] Giving source the simple spatial ID 46 for pass 0, mean size = 11.31"
[Fri May 31 07:36:20 2013] fullrun_pn_xmm0095011101_pi300-10000_cl_pass0_src46.ximg exists
[Fri May 31 07:36:20 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0095011101_pi300-10000_cl_pass0_src46.csv
[Fri May 31 07:36:20 2013] fullrun_pn_xmm0095011101_pi300-10000_cl_pass0_src46_1.ximg exists
[Fri May 31 07:36:20 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0095011101_pi300-10000_cl_pass0_src46.csv
[Fri May 31 07:36:20 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0095011101_pi300-10000_cl_pass0_src46_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0095011101_pi300-10000_cl_pass0_src46.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri May 31 07:36:22 2013] fullrun_pn_xmm0095011101_pi300-10000_cl_pass0_tfrozen_src46.ximg exists
[Fri May 31 07:36:22 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0095011101_pi300-10000_cl_pass0_tfrozen_src46.csv
[Fri May 31 07:36:22 2013] fullrun_pn_xmm0095011101_pi300-10000_cl_pass0_tfrozen_src46_1.ximg exists
[Fri May 31 07:36:22 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0095011101_pi300-10000_cl_pass0_tfrozen_src46.csv
[Fri May 31 07:36:22 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0095011101_pi300-10000_cl_pass0_tfrozen_src46_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0095011101_pi300-10000_cl_pass0_tfrozen_src46.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri May 31 14:30:39 2013] Warning, spatial fit 46 centroid is now closest to src. 30
[Fri May 31 14:30:40 2013] Vigneting correction estimate = 1.000000
[Fri May 31 14:30:40 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri May 31 14:30:40 2013] Assessing source extent using major
[Fri May 31 14:30:40 2013] Source does appear to be extended
[Fri May 31 14:30:40 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Fri May 31 14:31:26 2013] Using EEF radius (= 11.31 ")to estimate initial spatial extent for simple fitting
[Fri May 31 14:31:26 2013] Initial guess for spatial extent in simple fitting = 11.31"
[Fri May 31 14:31:26 2013] source mask rpix=2.6, npix_max = 38, mask sum = 36, frac = 0.937
[Fri May 31 14:31:26 2013] Giving source the simple spatial ID 43 for pass 1, mean size = 11.31"
[Fri May 31 18:20:13 2013] fullrun_pn_xmm0095011101_pi300-10000_cl_pass1_src43.ximg exists
[Fri May 31 18:20:13 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0095011101_pi300-10000_cl_pass1_src43.csv
[Fri May 31 18:20:13 2013] fullrun_pn_xmm0095011101_pi300-10000_cl_pass1_src43_1.ximg exists
[Fri May 31 18:20:13 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0095011101_pi300-10000_cl_pass1_src43.csv
[Fri May 31 18:20:13 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0095011101_pi300-10000_cl_pass1_src43_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0095011101_pi300-10000_cl_pass1_src43.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri May 31 18:20:14 2013] fullrun_pn_xmm0095011101_pi300-10000_cl_pass1_tfrozen_src43.ximg exists
[Fri May 31 18:20:14 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0095011101_pi300-10000_cl_pass1_tfrozen_src43.csv
[Fri May 31 18:20:14 2013] fullrun_pn_xmm0095011101_pi300-10000_cl_pass1_tfrozen_src43_1.ximg exists
[Fri May 31 18:20:14 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0095011101_pi300-10000_cl_pass1_tfrozen_src43.csv
[Fri May 31 18:20:14 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0095011101_pi300-10000_cl_pass1_tfrozen_src43_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0095011101_pi300-10000_cl_pass1_tfrozen_src43.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri May 31 22:47:05 2013] Spatial fit model total counts = 34307.700000, observed total counts = 31919.000000
[Fri May 31 22:47:05 2013] Offset between fit and detection position for source 46 = 7.904266 pixels
[Fri May 31 22:47:05 2013] Warning, changing simple spatial fit ID from 43 to 17
[Fri May 31 22:47:05 2013] 34787.800000 total counts/ 31955.200000 bgd. counts: snr = 15.845811
Spatial fit parameters:
  Offset between fit and detection position for source 46 = 7.904266 pixels
  Position = (161.3, 261.1) = 4 33 40.55 -13 19 52.0
  Extent = 44.5 (44.4-88.9)" x 41.1 (34.3-44.4)", rotation angle = -0
  Source counts = 2832.6 +/- 186.5
  Background counts = 31955.2
  Rate = 0.08 +/- 0.005
[Fri May 31 22:47:05 2013] Source 46 is offset by -7.334644 and 0.712920 pixels which is larger than
2 X fitted extent = 1.331306 x 1.331306, not incorporating fit results
[Fri May 31 22:47:05 2013] Vigneting correction estimate = 1.000000
[Fri May 31 22:47:05 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri May 31 22:47:05 2013] Assessing source extent using major axis lower bound
[Fri May 31 22:47:05 2013] Source does appear to be extended
[Fri May 31 22:47:05 2013] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 1.00
[Fri May 31 22:47:05 2013] Source is confused with source 19
[Fri May 31 22:47:35 2013] Counts = 2832.600000, rescaling region sizes by 2.000000
[Fri May 31 22:47:35 2013] XMMSAS src. selection expression = ellipse(13985.974000, 22663.936000, 5334.192153, 4926.120142, -0.000000, X, Y)
[Fri May 31 22:47:35 2013] Writing source region out to fullrun_pn_xmm0095011101_pi300-10000_pass1_cl_src46_src.reg
[Fri May 31 22:47:35 2013] Extracting stamp from image fullrun_pn_xmm0095011101_pi300-10000_cl_sm2.00.img.gz, (0, 0) - (468, 568)
[Fri May 31 22:47:36 2013] XMMSAS bgd. selection expression = annulus(13985.974000, 22663.936000, 17780.640512, 35561.281023, X, Y) && !ellipse(14668.035339, 27575.144318, 2610.000000, 2610.000000, 0.000000, X, Y) && !ellipse(13522.591980, 28244.471893, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(13590.726669, 27263.210236, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(14829.925751, 28267.589233, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27618.646973, 34375.683258, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(15504.117340, 32947.768677, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(13605.723602, 26232.904877, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(13720.794000, 25528.598000, 1890.032054, 565.952816, 104.557000, X, Y) && !ellipse(12662.962524, 25341.061951, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(15240.513200, 24948.878000, 1560.576045, 1560.576045, 0.000000, X, Y) && !ellipse(13653.326950, 25181.784088, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(15167.741058, 25276.462433, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(16218.437042, 24156.071930, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(13610.096436, 24497.046722, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(15342.014526, 23882.622498, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(14657.685200, 24377.070000, 1778.064051, 1778.064051, 0.000000, X, Y) && !ellipse(12819.659740, 21449.341400, 665.030419, 361.462410, 70.329200, X, Y) && !ellipse(28902.252800, 35024.416200, 501.481614, 399.932012, 358.068300, X, Y) && !ellipse(14783.616730, 33827.077209, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21859.917633, 36316.384888, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(15991.747986, 14638.658768, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(40087.442474, 31814.756165, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(16452.921265, 29511.704102, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(13046.330170, 24748.706329, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(13368.611400, 23640.862160, 1880.472054, 1264.688036, 301.532000, X, Y) && !ellipse(13781.027222, 23518.052460, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35751.583160, 39812.097351, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25598.980060, 32127.268200, 376.729099, 376.729099, 0.000000, X, Y) && !ellipse(29272.865631, 31360.900146, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18398.724533, 30308.027039, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(16972.490585, 28915.219910, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17283.837906, 27095.276978, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18022.464000, 27134.490000, 1609.368046, 1609.368046, 0.000000, X, Y) && !ellipse(33816.839417, 26582.689056, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23808.738342, 23431.033875, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29303.594800, 22852.011400, 399.861612, 399.861612, 0.000000, X, Y) && !ellipse(22433.396800, 21116.169400, 433.152012, 433.152012, 0.000000, X, Y) && !ellipse(31247.575531, 20284.091370, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(36739.129272, 30561.030090, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30463.853363, 29962.469666, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(36897.732758, 27529.682251, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25127.263062, 23690.448822, 870.000000, 870.000000, 0.000000, X, Y)
[Fri May 31 22:47:36 2013] Writing fullrun_pn_xmm0095011101_pi300-10000_pass1_cl_src46.gif
[Fri May 31 23:53:26 2013] Mean detx,y = (-12393.25, 1974.84) 
[Fri May 31 23:53:35 2013] Setting backscal keywords in source and bgd. spectrum
[Sat Jun  1 00:05:38 2013] Binned source spectrum to 10 counts/bin
[Sat Jun  1 00:05:39 2013] Setting source spectrum file to fullrun_pn_xmm0095011101_pi300-10000_pass1_cl_src46_src_b10.pi.gz
[Sat Jun  1 00:05:39 2013] Setting bgd. spectrum file to fullrun_pn_xmm0095011101_pi300-10000_pass1_cl_src46_bgd.pi.gz
[Sat Jun  1 05:19:19 2013] Updating aperture counts using extracted products
[Sat Jun  1 05:19:19 2013] Total counts from fullrun_pn_xmm0095011101_pi300-10000_pass1_cl_src46_src_b10.pi.gz = 161392.00
[Sat Jun  1 05:19:19 2013] Total counts from fullrun_pn_xmm0095011101_pi300-10000_pass1_cl_src46_bgd.pi.gz = 63593.00
[Sat Jun  1 05:19:19 2013] Got source and background scale factors 80288300.000000, 292907450.000000
[Sat Jun  1 05:19:19 2013] User source parameters:
  Position = (161.3, 261.1) = 4 33 40.55 -13 19 52.0
  Extent = 44.5 (44.4-88.9)" x 41.1 (34.3-44.4)", rotation angle = -0
  Source aperture counts = 143960.6 +/- 402.7
  Background aperture counts = 17431.4
  Rate = 4 +/- 0.01

[Sat Jun  1 05:19:24 2013] Calculating source flux in energy range 0.30-8.00
[Sat Jun  1 05:19:24 2013] Using photon index=1.80, rate=0.083, arf fullrun_pn_xmm0095011101_pi300-10000_pass1_cl_src46.arf
[Sat Jun  1 05:19:24 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Jun  1 05:19:24 2013] Updating source flux to 4.6e-12
[Sat Jun  1 05:20:13 2013] Flag b found in src. 46 procflags, skipping spectral fitting
[Sat Jun  1 05:20:13 2013] Flag c found in src. 46 procflags, skipping spectral fitting
[Sat Jun  1 05:20:40 2013] xmm0095011101/analysis//spectral/fullrun_pn_xmm0095011101_pi300-10000_pass1_cl_src46_pl.csv not found, spectral fit skipped or did not complete