[Fri May 31 02:53:31 2013] Detection parameters:
  Position = (171.0, 325.5) = 4 33 37.64 -13 15 9.8
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 6063.6 +/- 108.0
  Background counts = 632.8
  Rate = 0.2 +/- 0.003

[Fri May 31 02:53:36 2013] Off-axis axis estimate = 9.44'
[Fri May 31 03:02:05 2013] Using EEF radius (= 11.15 ")to estimate initial spatial extent for simple fitting
[Fri May 31 03:02:05 2013] Initial guess for spatial extent in simple fitting = 11.15"
[Fri May 31 03:02:05 2013] source mask rpix=2.6, npix_max = 37, mask sum = 36, frac = 0.959
[Fri May 31 03:02:05 2013] Giving source the simple spatial ID 4 for pass 0, mean size = 11.15"
[Fri May 31 07:36:19 2013] fullrun_pn_xmm0095011101_pi300-10000_cl_pass0_src4.ximg exists
[Fri May 31 07:36:19 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0095011101_pi300-10000_cl_pass0_src4.csv
[Fri May 31 07:36:19 2013] fullrun_pn_xmm0095011101_pi300-10000_cl_pass0_src4_1.ximg exists
[Fri May 31 07:36:19 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0095011101_pi300-10000_cl_pass0_src4.csv
[Fri May 31 07:36:19 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0095011101_pi300-10000_cl_pass0_src4_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0095011101_pi300-10000_cl_pass0_src4.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri May 31 07:36:21 2013] fullrun_pn_xmm0095011101_pi300-10000_cl_pass0_tfrozen_src4.ximg exists
[Fri May 31 07:36:21 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0095011101_pi300-10000_cl_pass0_tfrozen_src4.csv
[Fri May 31 07:36:21 2013] fullrun_pn_xmm0095011101_pi300-10000_cl_pass0_tfrozen_src4_1.ximg exists
[Fri May 31 07:36:21 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0095011101_pi300-10000_cl_pass0_tfrozen_src4.csv
[Fri May 31 07:36:21 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0095011101_pi300-10000_cl_pass0_tfrozen_src4_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0095011101_pi300-10000_cl_pass0_tfrozen_src4.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri May 31 14:30:39 2013] Warning, spatial fit 4 centroid is now closest to src. 1
[Fri May 31 14:30:39 2013] Vigneting correction estimate = 1.000000
[Fri May 31 14:30:39 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri May 31 14:30:39 2013] Assessing source extent using major
[Fri May 31 14:30:39 2013] Source does appear to be extended
[Fri May 31 14:30:39 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Fri May 31 14:31:26 2013] Using EEF radius (= 11.15 ")to estimate initial spatial extent for simple fitting
[Fri May 31 14:31:26 2013] Initial guess for spatial extent in simple fitting = 11.15"
[Fri May 31 14:31:26 2013] source mask rpix=2.6, npix_max = 37, mask sum = 36, frac = 0.959
[Fri May 31 14:31:26 2013] Giving source the simple spatial ID 4 for pass 1, mean size = 11.15"
[Fri May 31 18:20:12 2013] fullrun_pn_xmm0095011101_pi300-10000_cl_pass1_src4.ximg exists
[Fri May 31 18:20:12 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0095011101_pi300-10000_cl_pass1_src4.csv
[Fri May 31 18:20:12 2013] fullrun_pn_xmm0095011101_pi300-10000_cl_pass1_src4_1.ximg exists
[Fri May 31 18:20:12 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0095011101_pi300-10000_cl_pass1_src4.csv
[Fri May 31 18:20:12 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0095011101_pi300-10000_cl_pass1_src4_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0095011101_pi300-10000_cl_pass1_src4.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri May 31 18:20:13 2013] fullrun_pn_xmm0095011101_pi300-10000_cl_pass1_tfrozen_src4.ximg exists
[Fri May 31 18:20:13 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0095011101_pi300-10000_cl_pass1_tfrozen_src4.csv
[Fri May 31 18:20:13 2013] fullrun_pn_xmm0095011101_pi300-10000_cl_pass1_tfrozen_src4_1.ximg exists
[Fri May 31 18:20:13 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0095011101_pi300-10000_cl_pass1_tfrozen_src4.csv
[Fri May 31 18:20:13 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0095011101_pi300-10000_cl_pass1_tfrozen_src4_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0095011101_pi300-10000_cl_pass1_tfrozen_src4.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri May 31 22:47:04 2013] Spatial fit model total counts = 42249.400000, observed total counts = 36366.000000
[Fri May 31 22:47:04 2013] Poor agreement between spatial fit and data for source 4
It may help to tweak spatial fit manually
Not incorporating fit results
[Fri May 31 22:47:05 2013] Vigneting correction estimate = 1.000000
[Fri May 31 22:47:05 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri May 31 22:47:05 2013] Assessing source extent using major
[Fri May 31 22:47:05 2013] Source does appear to be extended
[Fri May 31 22:47:05 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Fri May 31 22:47:34 2013] Counts = 6063.554199, rescaling region sizes by 2.000000
[Fri May 31 22:47:34 2013] XMMSAS src. selection expression = ellipse(14829.925751, 28267.589233, 1305.000000, 1305.000000, 0.000000, X, Y)
[Fri May 31 22:47:34 2013] Writing source region out to fullrun_pn_xmm0095011101_pi300-10000_pass1_cl_src4_src.reg
[Fri May 31 22:47:34 2013] Extracting stamp from image fullrun_pn_xmm0095011101_pi300-10000_cl_sm2.00.img.gz, (96, 250) - (246, 400)
[Fri May 31 22:47:34 2013] XMMSAS bgd. selection expression = annulus(14829.925751, 28267.589233, 4350.000000, 8700.000000, X, Y) && !ellipse(14668.035339, 27575.144318, 2610.000000, 2610.000000, 0.000000, X, Y) && !ellipse(13522.591980, 28244.471893, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(13590.726669, 27263.210236, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(15504.117340, 32947.768677, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(13605.723602, 26232.904877, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(13720.794000, 25528.598000, 1890.032054, 565.952816, 104.557000, X, Y) && !ellipse(12662.962524, 25341.061951, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(15240.513200, 24948.878000, 1560.576045, 1560.576045, 0.000000, X, Y) && !ellipse(13653.326950, 25181.784088, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(15167.741058, 25276.462433, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(16218.437042, 24156.071930, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(13610.096436, 24497.046722, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(15342.014526, 23882.622498, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(14657.685200, 24377.070000, 1778.064051, 1778.064051, 0.000000, X, Y) && !ellipse(12819.659740, 21449.341400, 665.030419, 361.462410, 70.329200, X, Y) && !ellipse(14783.616730, 33827.077209, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21859.917633, 36316.384888, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(16452.921265, 29511.704102, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(13046.330170, 24748.706329, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(13368.611400, 23640.862160, 1880.472054, 1264.688036, 301.532000, X, Y) && !ellipse(13781.027222, 23518.052460, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18398.724533, 30308.027039, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(16972.490585, 28915.219910, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17283.837906, 27095.276978, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18022.464000, 27134.490000, 1609.368046, 1609.368046, 0.000000, X, Y) && !ellipse(23808.738342, 23431.033875, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(13985.974000, 22663.936000, 3556.128102, 3284.080094, -0.000000, X, Y) && !ellipse(22433.396800, 21116.169400, 433.152012, 433.152012, 0.000000, X, Y)
[Fri May 31 22:47:34 2013] Writing fullrun_pn_xmm0095011101_pi300-10000_pass1_cl_src4.gif
[Fri May 31 23:06:26 2013] Mean detx,y = (-11972.40, -1226.39) 
[Fri May 31 23:06:36 2013] Setting backscal keywords in source and bgd. spectrum
[Fri May 31 23:09:05 2013] Binned source spectrum to 10 counts/bin
[Fri May 31 23:09:05 2013] Setting source spectrum file to fullrun_pn_xmm0095011101_pi300-10000_pass1_cl_src4_src_b10.pi.gz
[Fri May 31 23:09:05 2013] Setting bgd. spectrum file to fullrun_pn_xmm0095011101_pi300-10000_pass1_cl_src4_bgd.pi.gz
[Sat Jun  1 00:16:12 2013] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Sat Jun  1 00:16:12 2013] rmf not generated due to insufficient counts
[Sat Jun  1 05:19:06 2013] Updating aperture counts using extracted products
[Sat Jun  1 05:19:06 2013] Total counts from fullrun_pn_xmm0095011101_pi300-10000_pass1_cl_src4_src_b10.pi.gz = 79890.00
[Sat Jun  1 05:19:07 2013] Total counts from fullrun_pn_xmm0095011101_pi300-10000_pass1_cl_src4_bgd.pi.gz = 112291.00
[Sat Jun  1 05:19:07 2013] Got source and background scale factors 4372426.000000, 116915138.000000
[Sat Jun  1 05:19:07 2013] User source parameters:
  Position = (171.0, 325.5) = 4 33 37.64 -13 15 9.8
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 75690.5 +/- 283.6
  Background aperture counts = 4199.5
  Rate = 2 +/- 0.008

[Sat Jun  1 05:19:07 2013] Updating counts from extracted products
[Sat Jun  1 05:19:07 2013] Set source signif. to 75690.51/64.80 = 1168.00
[Sat Jun  1 05:19:22 2013] Calculating source flux in energy range 0.30-8.00
[Sat Jun  1 05:19:22 2013] Using photon index=1.80, rate=2.22, arf fullrun_pn_xmm0095011101_pi300-10000_pass1_cl_src4.arf
[Sat Jun  1 05:19:22 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Jun  1 05:19:22 2013] Updating source flux to 1.8e-11
[Sat Jun  1 05:20:13 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Sat Jun  1 05:20:40 2013] xmm0095011101/analysis//spectral/fullrun_pn_xmm0095011101_pi300-10000_pass1_cl_src4_pl.csv not found, spectral fit skipped or did not complete