[Fri May 31 02:53:33 2013] Detection parameters:
  Position = (153.9, 272.1) = 4 33 42.74 -13 19 2.0
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 185.2 +/- 32.0
  Background counts = 324.4
  Rate = 0.005 +/- 0.0009

[Fri May 31 02:53:36 2013] Off-axis axis estimate = 10.65'
[Fri May 31 03:02:05 2013] Using EEF radius (= 11.75 ")to estimate initial spatial extent for simple fitting
[Fri May 31 03:02:05 2013] Initial guess for spatial extent in simple fitting = 11.75"
[Fri May 31 03:02:05 2013] source mask rpix=2.7, npix_max = 41, mask sum = 36, frac = 0.878
[Fri May 31 03:02:05 2013] Giving source the simple spatial ID 29 for pass 0, mean size = 11.75"
[Fri May 31 07:36:20 2013] fullrun_pn_xmm0095011101_pi300-10000_cl_pass0_src29.ximg exists
[Fri May 31 07:36:20 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0095011101_pi300-10000_cl_pass0_src29.csv
[Fri May 31 07:36:20 2013] fullrun_pn_xmm0095011101_pi300-10000_cl_pass0_src29_1.ximg exists
[Fri May 31 07:36:20 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0095011101_pi300-10000_cl_pass0_src29.csv
[Fri May 31 07:36:20 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0095011101_pi300-10000_cl_pass0_src29_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0095011101_pi300-10000_cl_pass0_src29.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri May 31 07:36:22 2013] fullrun_pn_xmm0095011101_pi300-10000_cl_pass0_tfrozen_src29.ximg exists
[Fri May 31 07:36:22 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0095011101_pi300-10000_cl_pass0_tfrozen_src29.csv
[Fri May 31 07:36:22 2013] fullrun_pn_xmm0095011101_pi300-10000_cl_pass0_tfrozen_src29_1.ximg exists
[Fri May 31 07:36:22 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0095011101_pi300-10000_cl_pass0_tfrozen_src29.csv
[Fri May 31 07:36:22 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0095011101_pi300-10000_cl_pass0_tfrozen_src29_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0095011101_pi300-10000_cl_pass0_tfrozen_src29.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri May 31 14:30:39 2013] Warning, spatial fit 29 centroid is now closest to src. 16
[Fri May 31 14:30:40 2013] Vigneting correction estimate = 1.000000
[Fri May 31 14:30:40 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri May 31 14:30:40 2013] Assessing source extent using major
[Fri May 31 14:30:40 2013] Source does appear to be extended
[Fri May 31 14:30:40 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Fri May 31 14:30:40 2013] Source is confused with source 30
[Fri May 31 14:31:26 2013] Using EEF radius (= 11.75 ")to estimate initial spatial extent for simple fitting
[Fri May 31 14:31:26 2013] Initial guess for spatial extent in simple fitting = 11.75"
[Fri May 31 14:31:26 2013] source mask rpix=2.7, npix_max = 41, mask sum = 36, frac = 0.878
[Fri May 31 14:31:26 2013] Giving source the simple spatial ID 28 for pass 1, mean size = 11.75"
[Fri May 31 18:20:13 2013] fullrun_pn_xmm0095011101_pi300-10000_cl_pass1_src28.ximg exists
[Fri May 31 18:20:13 2013] fullrun_pn_xmm0095011101_pi300-10000_cl_pass1_src28_1.ximg exists
[Fri May 31 18:20:13 2013] Fit fullrun_pn_xmm0095011101_pi300-10000_cl_pass1_src28 appears to have run properly
[Fri May 31 18:20:14 2013] fullrun_pn_xmm0095011101_pi300-10000_cl_pass1_tfrozen_src28.ximg exists
[Fri May 31 18:20:14 2013] fullrun_pn_xmm0095011101_pi300-10000_cl_pass1_tfrozen_src28_1.ximg exists
[Fri May 31 18:20:14 2013] Fit fullrun_pn_xmm0095011101_pi300-10000_cl_pass1_tfrozen_src28 appears to have run properly
[Fri May 31 22:47:05 2013] Spatial fit model total counts = 4418.050000, observed total counts = 4311.000000
[Fri May 31 22:47:05 2013] Offset between fit and detection position for source 29 = 0.338527 pixels
[Fri May 31 22:47:05 2013] 4419.470000 total counts/ 3722.020000 bgd. counts: snr = 11.432040
Spatial fit parameters:
  Offset between fit and detection position for source 29 = 0.338527 pixels
  Position = (154.2, 272.3) = 4 33 42.66 -13 19 3.1
  Extent = 23.5 (19.0-47.0)" x 15.8 (10.7-20.6)", rotation angle = 302 (91-53) degrees
  Source counts = 697.5 +/- 66.5
  Background counts = 3722.0
  Rate = 0.02 +/- 0.002
[Fri May 31 22:47:05 2013] Vigneting correction estimate = 1.000000
[Fri May 31 22:47:05 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri May 31 22:47:05 2013] Assessing source extent using major axis lower bound
[Fri May 31 22:47:05 2013] Source does appear to be extended
[Fri May 31 22:47:05 2013] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 0.92
[Fri May 31 22:47:35 2013] XMMSAS src. selection expression = ellipse(13368.611400, 23640.862160, 1410.354041, 948.516027, 301.532000, X, Y)
[Fri May 31 22:47:35 2013] Writing source region out to fullrun_pn_xmm0095011101_pi300-10000_pass1_cl_src29_src.reg
[Fri May 31 22:47:35 2013] Extracting stamp from image fullrun_pn_xmm0095011101_pi300-10000_cl_sm2.00.img.gz, (73, 191) - (235, 353)
[Fri May 31 22:47:35 2013] XMMSAS bgd. selection expression = annulus(13368.611400, 23640.862160, 2350.590068, 4701.180135, X, Y) && !ellipse(14668.035339, 27575.144318, 2610.000000, 2610.000000, 0.000000, X, Y) && !ellipse(13522.591980, 28244.471893, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(13590.726669, 27263.210236, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(14829.925751, 28267.589233, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(13605.723602, 26232.904877, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(13720.794000, 25528.598000, 1890.032054, 565.952816, 104.557000, X, Y) && !ellipse(12662.962524, 25341.061951, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(15240.513200, 24948.878000, 1560.576045, 1560.576045, 0.000000, X, Y) && !ellipse(13653.326950, 25181.784088, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(15167.741058, 25276.462433, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(16218.437042, 24156.071930, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(13610.096436, 24497.046722, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(15342.014526, 23882.622498, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(14657.685200, 24377.070000, 1778.064051, 1778.064051, 0.000000, X, Y) && !ellipse(12819.659740, 21449.341400, 665.030419, 361.462410, 70.329200, X, Y) && !ellipse(13046.330170, 24748.706329, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(13781.027222, 23518.052460, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(16972.490585, 28915.219910, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17283.837906, 27095.276978, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18022.464000, 27134.490000, 1609.368046, 1609.368046, 0.000000, X, Y) && !ellipse(13985.974000, 22663.936000, 3556.128102, 3284.080094, -0.000000, X, Y)
[Fri May 31 22:47:35 2013] Writing fullrun_pn_xmm0095011101_pi300-10000_pass1_cl_src29.gif
[Fri May 31 23:40:50 2013] Mean detx,y = (-13733.97, 2951.77) 
[Fri May 31 23:40:57 2013] Setting backscal keywords in source and bgd. spectrum
[Fri May 31 23:41:32 2013] Binned source spectrum to 10 counts/bin
[Fri May 31 23:41:32 2013] Setting source spectrum file to fullrun_pn_xmm0095011101_pi300-10000_pass1_cl_src29_src_b10.pi.gz
[Fri May 31 23:41:32 2013] Setting bgd. spectrum file to fullrun_pn_xmm0095011101_pi300-10000_pass1_cl_src29_bgd.pi.gz
[Sat Jun  1 05:19:15 2013] Updating aperture counts using extracted products
[Sat Jun  1 05:19:15 2013] Total counts from fullrun_pn_xmm0095011101_pi300-10000_pass1_cl_src29_src_b10.pi.gz = 7774.00
[Sat Jun  1 05:19:15 2013] Total counts from fullrun_pn_xmm0095011101_pi300-10000_pass1_cl_src29_bgd.pi.gz = 21511.00
[Sat Jun  1 05:19:15 2013] Got source and background scale factors 3843441.000000, 20912871.000000
[Sat Jun  1 05:19:15 2013] User source parameters:
  Position = (154.2, 272.3) = 4 33 42.66 -13 19 3.1
  Extent = 23.5 (19.0-47.0)" x 15.8 (10.7-20.6)", rotation angle = 302 (91-53) degrees
  Source aperture counts = 3820.6 +/- 89.2
  Background aperture counts = 3953.4
  Rate = 0.1 +/- 0.003

[Sat Jun  1 05:19:23 2013] Calculating source flux in energy range 0.30-8.00
[Sat Jun  1 05:19:23 2013] Using photon index=1.80, rate=0.0204, arf fullrun_pn_xmm0095011101_pi300-10000_pass1_cl_src29.arf
[Sat Jun  1 05:19:23 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Jun  1 05:19:23 2013] Updating source flux to 1.4e-13
[Sat Jun  1 05:20:13 2013] Flag c found in src. 29 procflags, skipping spectral fitting
[Sat Jun  1 05:20:40 2013] xmm0095011101/analysis//spectral/fullrun_pn_xmm0095011101_pi300-10000_pass1_cl_src29_pl.csv not found, spectral fit skipped or did not complete