[Fri May 31 02:53:33 2013] Detection parameters:
  Position = (333.0, 403.1) = 4 32 49.39 -13 9 33.6
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 1535.2 +/- 47.7
  Background counts = 59.0
  Rate = 0.08 +/- 0.003

[Fri May 31 02:53:36 2013] Off-axis axis estimate = 7.99'
[Fri May 31 03:02:05 2013] Using EEF radius (= 10.42 ")to estimate initial spatial extent for simple fitting
[Fri May 31 03:02:05 2013] Initial guess for spatial extent in simple fitting = 10.42"
[Fri May 31 03:02:05 2013] source mask rpix=2.4, npix_max = 33, mask sum = 36, frac = 1.073
[Fri May 31 03:02:05 2013] Giving source the simple spatial ID 21 for pass 0, mean size = 10.42"
[Fri May 31 07:36:20 2013] fullrun_pn_xmm0095011101_pi300-10000_cl_pass0_src21.ximg exists
[Fri May 31 07:36:20 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0095011101_pi300-10000_cl_pass0_src21.csv
[Fri May 31 07:36:20 2013] fullrun_pn_xmm0095011101_pi300-10000_cl_pass0_src21_1.ximg exists
[Fri May 31 07:36:20 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0095011101_pi300-10000_cl_pass0_src21.csv
[Fri May 31 07:36:20 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0095011101_pi300-10000_cl_pass0_src21_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0095011101_pi300-10000_cl_pass0_src21.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri May 31 07:36:21 2013] fullrun_pn_xmm0095011101_pi300-10000_cl_pass0_tfrozen_src21.ximg exists
[Fri May 31 07:36:21 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0095011101_pi300-10000_cl_pass0_tfrozen_src21.csv
[Fri May 31 07:36:21 2013] fullrun_pn_xmm0095011101_pi300-10000_cl_pass0_tfrozen_src21_1.ximg exists
[Fri May 31 07:36:21 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0095011101_pi300-10000_cl_pass0_tfrozen_src21.csv
[Fri May 31 07:36:21 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0095011101_pi300-10000_cl_pass0_tfrozen_src21_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0095011101_pi300-10000_cl_pass0_tfrozen_src21.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri May 31 14:30:39 2013] Source 21 is offset by 5.770770 and -2.115704 pixels which is larger than
2 X fitted extent = 1.152225 x 1.152225, not incorporating fit results
[Fri May 31 14:30:39 2013] Warning, spatial fit 21 centroid is now closest to src. 55
[Fri May 31 14:30:39 2013] Vigneting correction estimate = 1.000000
[Fri May 31 14:30:39 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri May 31 14:30:40 2013] Assessing source extent using major
[Fri May 31 14:30:40 2013] Source does appear to be extended
[Fri May 31 14:30:40 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Fri May 31 14:31:26 2013] Using EEF radius (= 10.42 ")to estimate initial spatial extent for simple fitting
[Fri May 31 14:31:26 2013] Initial guess for spatial extent in simple fitting = 10.42"
[Fri May 31 14:31:26 2013] source mask rpix=2.4, npix_max = 33, mask sum = 36, frac = 1.073
[Fri May 31 14:31:26 2013] Giving source the simple spatial ID 20 for pass 1, mean size = 10.42"
[Fri May 31 18:20:13 2013] fullrun_pn_xmm0095011101_pi300-10000_cl_pass1_src20.ximg exists
[Fri May 31 18:20:13 2013] fullrun_pn_xmm0095011101_pi300-10000_cl_pass1_src20_1.ximg exists
[Fri May 31 18:20:13 2013] Fit fullrun_pn_xmm0095011101_pi300-10000_cl_pass1_src20 appears to have run properly
[Fri May 31 18:20:14 2013] fullrun_pn_xmm0095011101_pi300-10000_cl_pass1_tfrozen_src20.ximg exists
[Fri May 31 18:20:14 2013] fullrun_pn_xmm0095011101_pi300-10000_cl_pass1_tfrozen_src20_1.ximg exists
[Fri May 31 18:20:14 2013] Fit fullrun_pn_xmm0095011101_pi300-10000_cl_pass1_tfrozen_src20 appears to have run properly
[Fri May 31 22:47:05 2013] Spatial fit model total counts = 2005.670000, observed total counts = 1901.000000
[Fri May 31 22:47:05 2013] Offset between fit and detection position for source 21 = 0.224041 pixels
[Fri May 31 22:47:05 2013] 1965.750000 total counts/ 840.020000 bgd. counts: snr = 38.840913
Spatial fit parameters:
  Offset between fit and detection position for source 21 = 0.224041 pixels
  Position = (332.8, 403.1) = 4 32 49.46 -13 9 34.1
  Extent = 6.3 (5.9-6.7)" x 5.0 (4.6-5.4)", rotation angle = 358 (346-9) degrees
  Source counts = 1125.7 +/- 44.3
  Background counts = 840.0
  Rate = 0.03 +/- 0.001
[Fri May 31 22:47:05 2013] Vigneting correction estimate = 1.000000
[Fri May 31 22:47:05 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri May 31 22:47:05 2013] Assessing source extent using major axis lower bound
[Fri May 31 22:47:05 2013] Source does appear to be extended
[Fri May 31 22:47:05 2013] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 1.09
[Fri May 31 22:47:35 2013] Counts = 1125.730000, rescaling region sizes by 2.000000
[Fri May 31 22:47:35 2013] XMMSAS src. selection expression = ellipse(28902.252800, 35024.416200, 752.222422, 599.898017, 358.068300, X, Y)
[Fri May 31 22:47:35 2013] Writing source region out to fullrun_pn_xmm0095011101_pi300-10000_pass1_cl_src21_src.reg
[Fri May 31 22:47:35 2013] Extracting stamp from image fullrun_pn_xmm0095011101_pi300-10000_cl_sm2.00.img.gz, (290, 360) - (376, 446)
[Fri May 31 22:47:35 2013] XMMSAS bgd. selection expression = annulus(28902.252800, 35024.416200, 2507.408072, 5014.816144, X, Y) && !ellipse(27618.646973, 34375.683258, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25598.980060, 32127.268200, 376.729099, 376.729099, 0.000000, X, Y) && !ellipse(29272.865631, 31360.900146, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30463.853363, 29962.469666, 870.000000, 870.000000, 0.000000, X, Y)
[Fri May 31 22:47:35 2013] Writing fullrun_pn_xmm0095011101_pi300-10000_pass1_cl_src21.gif
[Fri May 31 23:33:18 2013] Mean detx,y = (2384.94, -7454.09) 
[Fri May 31 23:33:23 2013] Setting backscal keywords in source and bgd. spectrum
[Fri May 31 23:34:06 2013] Binned source spectrum to 10 counts/bin
[Fri May 31 23:34:09 2013] Setting source spectrum file to fullrun_pn_xmm0095011101_pi300-10000_pass1_cl_src21_src_b10.pi.gz
[Fri May 31 23:34:09 2013] Setting bgd. spectrum file to fullrun_pn_xmm0095011101_pi300-10000_pass1_cl_src21_bgd.pi.gz
[Sat Jun  1 05:19:12 2013] Updating aperture counts using extracted products
[Sat Jun  1 05:19:12 2013] Total counts from fullrun_pn_xmm0095011101_pi300-10000_pass1_cl_src21_src_b10.pi.gz = 1750.00
[Sat Jun  1 05:19:12 2013] Total counts from fullrun_pn_xmm0095011101_pi300-10000_pass1_cl_src21_bgd.pi.gz = 16253.00
[Sat Jun  1 05:19:12 2013] Got source and background scale factors 1361544.000000, 52094547.000000
[Sat Jun  1 05:19:12 2013] User source parameters:
  Position = (332.8, 403.1) = 4 32 49.46 -13 9 34.1
  Extent = 6.3 (5.9-6.7)" x 5.0 (4.6-5.4)", rotation angle = 358 (346-9) degrees
  Source aperture counts = 1325.2 +/- 42.8
  Background aperture counts = 424.8
  Rate = 0.04 +/- 0.001

[Sat Jun  1 05:19:23 2013] Calculating source flux in energy range 0.30-8.00
[Sat Jun  1 05:19:23 2013] Using photon index=1.80, rate=0.033, arf fullrun_pn_xmm0095011101_pi300-10000_pass1_cl_src21.arf
[Sat Jun  1 05:19:23 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Jun  1 05:19:23 2013] Updating source flux to 1.3e-13
[Sat Jun  1 05:20:13 2013] Flag b found in src. 21 procflags, skipping spectral fitting
[Sat Jun  1 05:20:40 2013] xmm0095011101/analysis//spectral/fullrun_pn_xmm0095011101_pi300-10000_pass1_cl_src21_pl.csv not found, spectral fit skipped or did not complete