[Fri May 31 02:53:32 2013] Detection parameters:
  Position = (159.8, 294.9) = 4 33 40.98 -13 17 23.3
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 331.0 +/- 35.4
  Background counts = 543.9
  Rate = 0.01 +/- 0.001

[Fri May 31 02:53:36 2013] Off-axis axis estimate = 10.05'
[Fri May 31 03:02:05 2013] Using EEF radius (= 11.45 ")to estimate initial spatial extent for simple fitting
[Fri May 31 03:02:05 2013] Initial guess for spatial extent in simple fitting = 11.45"
[Fri May 31 03:02:05 2013] source mask rpix=2.6, npix_max = 39, mask sum = 20, frac = 0.509
[Fri May 31 03:02:05 2013] Giving source the simple spatial ID 10 for pass 0, mean size = 11.45"
[Fri May 31 07:36:19 2013] fullrun_pn_xmm0095011101_pi300-10000_cl_pass0_src10.ximg exists
[Fri May 31 07:36:19 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0095011101_pi300-10000_cl_pass0_src10.csv
[Fri May 31 07:36:19 2013] fullrun_pn_xmm0095011101_pi300-10000_cl_pass0_src10_1.ximg exists
[Fri May 31 07:36:19 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0095011101_pi300-10000_cl_pass0_src10.csv
[Fri May 31 07:36:19 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0095011101_pi300-10000_cl_pass0_src10_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0095011101_pi300-10000_cl_pass0_src10.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri May 31 07:36:21 2013] fullrun_pn_xmm0095011101_pi300-10000_cl_pass0_tfrozen_src10.ximg exists
[Fri May 31 07:36:21 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0095011101_pi300-10000_cl_pass0_tfrozen_src10.csv
[Fri May 31 07:36:21 2013] fullrun_pn_xmm0095011101_pi300-10000_cl_pass0_tfrozen_src10_1.ximg exists
[Fri May 31 07:36:21 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0095011101_pi300-10000_cl_pass0_tfrozen_src10.csv
[Fri May 31 07:36:21 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0095011101_pi300-10000_cl_pass0_tfrozen_src10_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0095011101_pi300-10000_cl_pass0_tfrozen_src10.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri May 31 14:30:39 2013] Spatial fit model total counts = 9269.000000, observed total counts = 7925.000000
[Fri May 31 14:30:39 2013] Poor agreement between spatial fit and data for source 10
It may help to tweak spatial fit manually
Not incorporating fit results
[Fri May 31 14:30:39 2013] Source 10 is offset by 3.335537 and 0.963380 pixels which is larger than
2 X fitted extent = 1.440437 x 1.440437, not incorporating fit results
[Fri May 31 14:30:39 2013] Source 10 is offset by 1.717512 and 1.772931 pixels which is larger than
2 X fitted extent = 1.332156 x 1.332156, not incorporating fit results
[Fri May 31 14:30:39 2013] Spatial fit model total counts = 6238.750000, observed total counts = 6110.000000
[Fri May 31 14:30:39 2013] Offset between fit and detection position for source 10 = 1.803445 pixels
[Fri May 31 14:30:39 2013] Warning, changing simple spatial fit ID from 10 to 28
[Fri May 31 14:30:39 2013] 6416.926000 total counts/ 6236.230000 bgd. counts: snr = 2.288166
Spatial fit parameters:
  Offset between fit and detection position for source 10 = 1.803445 pixels
  Position = (158.3, 294.0) = 4 33 41.45 -13 17 28.7
  Extent = 23.6 (23.6-47.3)" x 7.1 (3.0-22.6)", rotation angle = 105 (90-132) degrees
  Source counts = 180.7 +/- 80.1
  Background counts = 6236.2
  Rate = 0.005 +/- 0.002
[Fri May 31 14:30:39 2013] Vigneting correction estimate = 1.000000
[Fri May 31 14:30:39 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri May 31 14:30:39 2013] Assessing source extent using major axis lower bound
[Fri May 31 14:30:39 2013] Source does appear to be extended
[Fri May 31 14:30:39 2013] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 1.05
[Fri May 31 14:30:40 2013] Source is confused with source 8
[Fri May 31 14:31:26 2013] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri May 31 14:31:26 2013] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Fri May 31 14:31:26 2013] Initial guess for spatial extent in simple fitting = 15.35"
[Fri May 31 14:31:26 2013] source mask rpix=3.5, npix_max = 64, mask sum = 52, frac = 0.801
[Fri May 31 14:31:26 2013] Giving source the simple spatial ID 9 for pass 1, mean size = 15.35"
[Fri May 31 18:20:12 2013] fullrun_pn_xmm0095011101_pi300-10000_cl_pass1_src9.ximg exists
[Fri May 31 18:20:12 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0095011101_pi300-10000_cl_pass1_src9.csv
[Fri May 31 18:20:12 2013] fullrun_pn_xmm0095011101_pi300-10000_cl_pass1_src9_1.ximg exists
[Fri May 31 18:20:12 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0095011101_pi300-10000_cl_pass1_src9.csv
[Fri May 31 18:20:12 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0095011101_pi300-10000_cl_pass1_src9_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0095011101_pi300-10000_cl_pass1_src9.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri May 31 18:20:13 2013] fullrun_pn_xmm0095011101_pi300-10000_cl_pass1_tfrozen_src9.ximg exists
[Fri May 31 18:20:13 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0095011101_pi300-10000_cl_pass1_tfrozen_src9.csv
[Fri May 31 18:20:13 2013] fullrun_pn_xmm0095011101_pi300-10000_cl_pass1_tfrozen_src9_1.ximg exists
[Fri May 31 18:20:13 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0095011101_pi300-10000_cl_pass1_tfrozen_src9.csv
[Fri May 31 18:20:13 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0095011101_pi300-10000_cl_pass1_tfrozen_src9_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0095011101_pi300-10000_cl_pass1_tfrozen_src9.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri May 31 22:47:05 2013] Warning, spatial fit 9 centroid is now closest to src. 28
[Fri May 31 22:47:05 2013] Vigneting correction estimate = 1.000000
[Fri May 31 22:47:05 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri May 31 22:47:05 2013] Assessing source extent using major axis lower bound
[Fri May 31 22:47:05 2013] Source does appear to be extended
[Fri May 31 22:47:05 2013] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 1.05
[Fri May 31 22:47:34 2013] XMMSAS src. selection expression = ellipse(13720.794000, 25528.598000, 1417.524041, 424.464612, 104.557000, X, Y)
[Fri May 31 22:47:34 2013] Writing source region out to fullrun_pn_xmm0095011101_pi300-10000_pass1_cl_src10_src.reg
[Fri May 31 22:47:34 2013] Extracting stamp from image fullrun_pn_xmm0095011101_pi300-10000_cl_sm2.00.img.gz, (77, 213) - (240, 375)
[Fri May 31 22:47:34 2013] XMMSAS bgd. selection expression = annulus(13720.794000, 25528.598000, 2362.540068, 4725.080136, X, Y) && !ellipse(14668.035339, 27575.144318, 2610.000000, 2610.000000, 0.000000, X, Y) && !ellipse(13522.591980, 28244.471893, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(13590.726669, 27263.210236, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(14829.925751, 28267.589233, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(13605.723602, 26232.904877, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(12662.962524, 25341.061951, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(15240.513200, 24948.878000, 1560.576045, 1560.576045, 0.000000, X, Y) && !ellipse(13653.326950, 25181.784088, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(15167.741058, 25276.462433, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(16218.437042, 24156.071930, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(13610.096436, 24497.046722, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(15342.014526, 23882.622498, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(14657.685200, 24377.070000, 1778.064051, 1778.064051, 0.000000, X, Y) && !ellipse(12819.659740, 21449.341400, 665.030419, 361.462410, 70.329200, X, Y) && !ellipse(16452.921265, 29511.704102, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(13046.330170, 24748.706329, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(13368.611400, 23640.862160, 1880.472054, 1264.688036, 301.532000, X, Y) && !ellipse(13781.027222, 23518.052460, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18398.724533, 30308.027039, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(16972.490585, 28915.219910, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17283.837906, 27095.276978, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18022.464000, 27134.490000, 1609.368046, 1609.368046, 0.000000, X, Y) && !ellipse(13985.974000, 22663.936000, 3556.128102, 3284.080094, -0.000000, X, Y)
[Fri May 31 22:47:34 2013] Writing fullrun_pn_xmm0095011101_pi300-10000_pass1_cl_src10.gif
[Fri May 31 23:15:41 2013] Mean detx,y = (-13363.57, 974.70) 
[Fri May 31 23:15:49 2013] Setting backscal keywords in source and bgd. spectrum
[Fri May 31 23:16:39 2013] Binned source spectrum to 10 counts/bin
[Fri May 31 23:16:40 2013] Setting source spectrum file to fullrun_pn_xmm0095011101_pi300-10000_pass1_cl_src10_src_b10.pi.gz
[Fri May 31 23:16:40 2013] Setting bgd. spectrum file to fullrun_pn_xmm0095011101_pi300-10000_pass1_cl_src10_bgd.pi.gz
[Sat Jun  1 05:19:08 2013] Updating aperture counts using extracted products
[Sat Jun  1 05:19:08 2013] Total counts from fullrun_pn_xmm0095011101_pi300-10000_pass1_cl_src10_src_b10.pi.gz = 6808.00
[Sat Jun  1 05:19:08 2013] Total counts from fullrun_pn_xmm0095011101_pi300-10000_pass1_cl_src10_bgd.pi.gz = 24756.00
[Sat Jun  1 05:19:08 2013] Got source and background scale factors 1510282.000000, 17569391.000000
[Sat Jun  1 05:19:08 2013] User source parameters:
  Position = (158.3, 294.0) = 4 33 41.45 -13 17 28.7
  Extent = 23.6 (23.6-47.3)" x 7.1 (3.0-22.6)", rotation angle = 105 (90-132) degrees
  Source aperture counts = 4680.0 +/- 83.5
  Background aperture counts = 2128.0
  Rate = 0.1 +/- 0.002

[Sat Jun  1 05:19:22 2013] Calculating source flux in energy range 0.30-8.00
[Sat Jun  1 05:19:22 2013] Using photon index=1.80, rate=0.00529, arf fullrun_pn_xmm0095011101_pi300-10000_pass1_cl_src10.arf
[Sat Jun  1 05:19:22 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Jun  1 05:19:22 2013] Updating source flux to 6.4e-14
[Sat Jun  1 05:20:13 2013] Flag b found in src. 10 procflags, skipping spectral fitting
[Sat Jun  1 05:20:13 2013] Flag p found in src. 10 procflags, skipping spectral fitting
[Sat Jun  1 05:20:13 2013] Flag c found in src. 10 procflags, skipping spectral fitting
[Sat Jun  1 05:20:40 2013] xmm0095011101/analysis//spectral/fullrun_pn_xmm0095011101_pi300-10000_pass1_cl_src10_pl.csv not found, spectral fit skipped or did not complete