[Fri May 31 02:54:21 2013] Detection parameters:
  Position = (318.5, 396.1) = 4 32 53.71 -13 10 5.9
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 412.1 +/- 25.0
  Background counts = 27.8
  Rate = 0.02 +/- 0.001

[Fri May 31 02:54:23 2013] Off-axis axis estimate = 7.23'
[Fri May 31 07:36:22 2013] Using EEF radius (= 10.04 ")to estimate initial spatial extent for simple fitting
[Fri May 31 07:36:22 2013] Initial guess for spatial extent in simple fitting = 10.04"
[Fri May 31 07:36:22 2013] source mask rpix=2.3, npix_max = 31, mask sum = 25, frac = 0.792
[Fri May 31 07:36:22 2013] Giving source the simple spatial ID 5 for pass 0, mean size = 10.04"
[Fri May 31 12:31:17 2013] fullrun_mos1_xmm0095011101_pi300-10000_cl_pass0_src5.ximg exists
[Fri May 31 12:31:17 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0095011101_pi300-10000_cl_pass0_src5.csv
[Fri May 31 12:31:17 2013] fullrun_mos1_xmm0095011101_pi300-10000_cl_pass0_src5_1.ximg exists
[Fri May 31 12:31:17 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0095011101_pi300-10000_cl_pass0_src5.csv
[Fri May 31 12:31:17 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0095011101_pi300-10000_cl_pass0_src5_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0095011101_pi300-10000_cl_pass0_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri May 31 12:31:18 2013] fullrun_mos1_xmm0095011101_pi300-10000_cl_pass0_tfrozen_src5.ximg exists
[Fri May 31 12:31:18 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0095011101_pi300-10000_cl_pass0_tfrozen_src5.csv
[Fri May 31 12:31:18 2013] fullrun_mos1_xmm0095011101_pi300-10000_cl_pass0_tfrozen_src5_1.ximg exists
[Fri May 31 12:31:18 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0095011101_pi300-10000_cl_pass0_tfrozen_src5.csv
[Fri May 31 12:31:18 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0095011101_pi300-10000_cl_pass0_tfrozen_src5_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0095011101_pi300-10000_cl_pass0_tfrozen_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri May 31 14:30:56 2013] Warning: source 5 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 6 at 13.380675 pixels away
[Fri May 31 14:30:56 2013] Vigneting correction estimate = 1.000000
[Fri May 31 14:30:56 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri May 31 14:30:56 2013] Assessing source extent using major
[Fri May 31 14:30:56 2013] Source does appear to be extended
[Fri May 31 14:30:56 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Fri May 31 18:20:14 2013] Using EEF radius (= 10.04 ")to estimate initial spatial extent for simple fitting
[Fri May 31 18:20:14 2013] Initial guess for spatial extent in simple fitting = 10.04"
[Fri May 31 18:20:14 2013] source mask rpix=2.3, npix_max = 31, mask sum = 25, frac = 0.792
[Fri May 31 18:20:14 2013] Giving source the simple spatial ID 5 for pass 1, mean size = 10.04"
[Fri May 31 21:45:55 2013] fullrun_mos1_xmm0095011101_pi300-10000_cl_pass1_src5.ximg exists
[Fri May 31 21:45:55 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0095011101_pi300-10000_cl_pass1_src5.csv
[Fri May 31 21:45:55 2013] fullrun_mos1_xmm0095011101_pi300-10000_cl_pass1_src5_1.ximg exists
[Fri May 31 21:45:55 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0095011101_pi300-10000_cl_pass1_src5.csv
[Fri May 31 21:45:55 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0095011101_pi300-10000_cl_pass1_src5_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0095011101_pi300-10000_cl_pass1_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri May 31 21:45:56 2013] fullrun_mos1_xmm0095011101_pi300-10000_cl_pass1_tfrozen_src5.ximg exists
[Fri May 31 21:45:56 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0095011101_pi300-10000_cl_pass1_tfrozen_src5.csv
[Fri May 31 21:45:56 2013] fullrun_mos1_xmm0095011101_pi300-10000_cl_pass1_tfrozen_src5_1.ximg exists
[Fri May 31 21:45:56 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0095011101_pi300-10000_cl_pass1_tfrozen_src5.csv
[Fri May 31 21:45:56 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0095011101_pi300-10000_cl_pass1_tfrozen_src5_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0095011101_pi300-10000_cl_pass1_tfrozen_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri May 31 22:47:14 2013] Warning: source 5 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 6 at 13.300083 pixels away
[Fri May 31 22:47:14 2013] Vigneting correction estimate = 1.000000
[Fri May 31 22:47:14 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri May 31 22:47:14 2013] Assessing source extent using major
[Fri May 31 22:47:14 2013] Source does appear to be extended
[Fri May 31 22:47:14 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jun  1 01:11:45 2013] XMMSAS src. selection expression = ellipse(27658.740570, 34411.441193, 652.500000, 652.500000, 0.000000, X, Y)
[Sat Jun  1 01:11:45 2013] Writing source region out to fullrun_mos1_xmm0095011101_pi300-10000_pass1_cl_src6_src.reg
[Sat Jun  1 01:11:45 2013] Extracting stamp from image fullrun_mos1_xmm0095011101_pi300-10000_cl_sm2.00.img.gz, (281, 359) - (356, 434)
[Sat Jun  1 01:11:45 2013] XMMSAS bgd. selection expression = annulus(27658.740570, 34411.441193, 1087.500000, 2175.000000, X, Y) && !ellipse(28954.691800, 35041.285000, 472.318414, 398.919211, 5.195110, X, Y)
[Sat Jun  1 01:11:45 2013] Writing fullrun_mos1_xmm0095011101_pi300-10000_pass1_cl_src6.gif
[Sat Jun  1 01:35:54 2013] Mean detx,y = (6982.30, 746.75) 
[Sat Jun  1 01:35:56 2013] Setting backscal keywords in source and bgd. spectrum
[Sat Jun  1 01:36:36 2013] Binned source spectrum to 10 counts/bin
[Sat Jun  1 01:36:36 2013] Setting source spectrum file to fullrun_mos1_xmm0095011101_pi300-10000_pass1_cl_src6_src_b10.pi.gz
[Sat Jun  1 01:36:36 2013] Setting bgd. spectrum file to fullrun_mos1_xmm0095011101_pi300-10000_pass1_cl_src6_bgd.pi.gz
[Sat Jun  1 02:50:45 2013] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Sat Jun  1 02:50:45 2013] rmf not generated due to insufficient counts
[Sat Jun  1 05:19:25 2013] Updating aperture counts using extracted products
[Sat Jun  1 05:19:25 2013] Total counts from fullrun_mos1_xmm0095011101_pi300-10000_pass1_cl_src6_src_b10.pi.gz = 543.00
[Sat Jun  1 05:19:25 2013] Total counts from fullrun_mos1_xmm0095011101_pi300-10000_pass1_cl_src6_bgd.pi.gz = 1464.00
[Sat Jun  1 05:19:25 2013] Got source and background scale factors 1153766.000000, 10105112.000000
[Sat Jun  1 05:19:25 2013] User source parameters:
  Position = (318.5, 396.1) = 4 32 53.71 -13 10 5.9
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 375.8 +/- 24.3
  Background aperture counts = 167.2
  Rate = 0.01 +/- 0.0007

[Sat Jun  1 05:19:25 2013] Updating counts from extracted products
[Sat Jun  1 05:19:25 2013] Set source signif. to 375.85/12.93 = 29.07
[Sat Jun  1 05:19:30 2013] Calculating source flux in energy range 0.30-8.00
[Sat Jun  1 05:19:30 2013] Using photon index=1.80, rate=0.0105, arf fullrun_mos1_xmm0095011101_pi300-10000_pass1_cl_src6.arf
[Sat Jun  1 05:19:30 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Jun  1 05:19:30 2013] Updating source flux to 1.5e-13
[Sat Jun  1 05:19:39 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Sat Jun  1 05:20:02 2013] xmm0095011101/analysis//spectral/fullrun_mos1_xmm0095011101_pi300-10000_pass1_cl_src6_pl.csv not found, spectral fit skipped or did not complete