[Fri May 31 02:54:21 2013] Detection parameters: Position = (169.9, 319.0) = 4 33 37.96 -13 15 39.3 Extent = 10.9" x 10.9", rotation angle = 0 degrees Source counts = 6248.8 +/- 103.0 Background counts = 333.7 Rate = 0.2 +/- 0.003 [Fri May 31 02:54:23 2013] Off-axis axis estimate = 9.43' [Fri May 31 07:36:22 2013] Using EEF radius (= 11.15 ")to estimate initial spatial extent for simple fitting [Fri May 31 07:36:22 2013] Setting initial spatial extent for simple fitting to maximum allowed for this pass [Fri May 31 07:36:22 2013] Initial guess for spatial extent in simple fitting = 11.15" [Fri May 31 07:36:22 2013] source mask rpix=2.6, npix_max = 37, mask sum = 36, frac = 0.960 [Fri May 31 07:36:22 2013] Giving source the simple spatial ID 1 for pass 0, mean size = 11.15" [Fri May 31 12:31:17 2013] fullrun_mos1_xmm0095011101_pi300-10000_cl_pass0_src1.ximg exists [Fri May 31 12:31:17 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0095011101_pi300-10000_cl_pass0_src1.csv [Fri May 31 12:31:17 2013] fullrun_mos1_xmm0095011101_pi300-10000_cl_pass0_src1_1.ximg exists [Fri May 31 12:31:17 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0095011101_pi300-10000_cl_pass0_src1.csv [Fri May 31 12:31:17 2013] It looks like the fit did not converge You should probably delete fullrun_mos1_xmm0095011101_pi300-10000_cl_pass0_src1_1.ximg Either tweak this fit manually starting from fullrun_mos1_xmm0095011101_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Fri May 31 12:31:18 2013] fullrun_mos1_xmm0095011101_pi300-10000_cl_pass0_tfrozen_src1.ximg exists [Fri May 31 12:31:18 2013] fullrun_mos1_xmm0095011101_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists [Fri May 31 12:31:18 2013] Fit fullrun_mos1_xmm0095011101_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly [Fri May 31 14:30:56 2013] Spatial fit model total counts = 26982.400000, observed total counts = 27525.000000 [Fri May 31 14:30:56 2013] Offset between fit and detection position for source 5 = 6.080712 pixels [Fri May 31 14:30:56 2013] 9069.153700 total counts/ 31.183700 bgd. counts: snr = 1618.479018 Spatial fit parameters: Offset between fit and detection position for source 5 = 6.080712 pixels Position = (165.9, 314.5) = 4 33 39.18 -13 15 59.7 Extent = 21.8 (21.8-21.8)", rotation angle = 0 Source counts = 9038.0 +/- 95.2 Background counts = 31.2 Rate = 0.3 +/- 0.003 [Fri May 31 14:30:56 2013] Spatial fit model total counts = 9640.510000, observed total counts = 9256.000000 [Fri May 31 14:30:56 2013] Offset between fit and detection position for source 5 = 5.658930 pixels [Fri May 31 14:30:56 2013] Warning, changing simple spatial fit ID from 1 to 3 [Fri May 31 14:30:56 2013] 9752.630000 total counts/ 7044.650000 bgd. counts: snr = 32.263817 Spatial fit parameters: Offset between fit and detection position for source 5 = 5.658930 pixels Position = (171.5, 314.5) = 4 33 37.49 -13 15 59.5 Extent = 19.2 (17.2-21.2)" x 8.6 (7.6-10.0)", rotation angle = 359 (354-2) degrees Source counts = 2708.0 +/- 98.8 Background counts = 7044.6 Rate = 0.08 +/- 0.003 [Fri May 31 14:30:56 2013] Source 5 is offset by 3.026411 and -3.388851 pixels which is larger than 2 X fitted extent = 1.342956 x 1.342956, not incorporating fit results [Fri May 31 14:30:56 2013] Vigneting correction estimate = 1.000000 [Fri May 31 14:30:56 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Fri May 31 14:30:56 2013] Assessing source extent using major axis lower bound [Fri May 31 14:30:56 2013] Source does appear to be extended [Fri May 31 14:30:56 2013] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 1.72 [Fri May 31 14:30:56 2013] Source is asymmetric [Fri May 31 14:30:56 2013] Source is confused with source 3 [Fri May 31 14:30:56 2013] Source is confused with source 1 [Fri May 31 14:30:56 2013] Source is confused with source 8 [Fri May 31 18:20:14 2013] Using previous fit value to estimate initial spatial extent for simple fitting [Fri May 31 18:20:14 2013] Setting initial spatial extent for simple fitting to maximum allowed for this pass [Fri May 31 18:20:14 2013] Initial guess for spatial extent in simple fitting = 13.91" [Fri May 31 18:20:14 2013] source mask rpix=3.2, npix_max = 54, mask sum = 49, frac = 0.895 [Fri May 31 18:20:14 2013] Giving source the simple spatial ID 1 for pass 1, mean size = 13.91" [Fri May 31 21:45:55 2013] fullrun_mos1_xmm0095011101_pi300-10000_cl_pass1_src1.ximg exists [Fri May 31 21:45:55 2013] fullrun_mos1_xmm0095011101_pi300-10000_cl_pass1_src1_1.ximg exists [Fri May 31 21:45:55 2013] Fit fullrun_mos1_xmm0095011101_pi300-10000_cl_pass1_src1 appears to have run properly [Fri May 31 21:45:56 2013] fullrun_mos1_xmm0095011101_pi300-10000_cl_pass1_tfrozen_src1.ximg exists [Fri May 31 21:45:56 2013] fullrun_mos1_xmm0095011101_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists [Fri May 31 21:45:56 2013] Fit fullrun_mos1_xmm0095011101_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly [Fri May 31 22:47:14 2013] Warning, spatial fit 1 centroid is now closest to src. 13 [Fri May 31 22:47:14 2013] Spatial fit model total counts = 33071.400000, observed total counts = 32570.000000 [Fri May 31 22:47:14 2013] Offset between fit and detection position for source 5 = 6.179598 pixels [Fri May 31 22:47:14 2013] Warning, changing simple spatial fit ID from 1 to 13 [Fri May 31 22:47:14 2013] 28071.700000 total counts/ 20844.900000 bgd. counts: snr = 50.054846 Spatial fit parameters: Offset between fit and detection position for source 5 = 6.179598 pixels Position = (169.9, 320.5) = 4 33 37.99 -13 15 33.6 Extent = 21.0 (19.8-22.2)" x 14.8 (14.2-16.0)", rotation angle = 129 (120-136) degrees Source counts = 7226.8 +/- 167.5 Background counts = 20844.9 Rate = 0.2 +/- 0.005 [Fri May 31 22:47:14 2013] Vigneting correction estimate = 1.000000 [Fri May 31 22:47:14 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Fri May 31 22:47:14 2013] Assessing source extent using major axis lower bound [Fri May 31 22:47:14 2013] Source does appear to be extended [Fri May 31 22:47:14 2013] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 1.24 [Sat Jun 1 01:11:45 2013] Counts = 7226.800000, rescaling region sizes by 2.000000 [Sat Jun 1 01:11:45 2013] XMMSAS src. selection expression = ellipse(14728.552000, 27831.292000, 2524.704073, 1777.128051, 129.339300, X, Y) [Sat Jun 1 01:11:45 2013] Writing source region out to fullrun_mos1_xmm0095011101_pi300-10000_pass1_cl_src5_src.reg [Sat Jun 1 01:11:45 2013] Extracting stamp from image fullrun_mos1_xmm0095011101_pi300-10000_cl_sm2.00.img.gz, (25, 175) - (315, 466) [Sat Jun 1 01:11:45 2013] XMMSAS bgd. selection expression = annulus(14728.552000, 27831.292000, 8415.680242, 16831.360484, X, Y) && !ellipse(28954.691800, 35041.285000, 472.318414, 398.919211, 5.195110, X, Y) && !ellipse(14556.962000, 26671.428000, 2794.224080, 2794.224080, 0.000000, X, Y) && !ellipse(14227.911600, 26616.436000, 1797.256052, 983.944028, 93.032000, X, Y) && !ellipse(27658.740570, 34411.441193, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(14385.372955, 25972.937683, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19338.363297, 29823.810760, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30574.130198, 23996.007000, 419.601612, 419.601612, 0.000000, X, Y) && !ellipse(15079.060000, 25452.122000, 1714.664049, 1059.736030, 18.876800, X, Y) && !ellipse(17341.742000, 26242.524000, 1651.312048, 1651.312048, 0.000000, X, Y) && !ellipse(13595.872000, 27515.582000, 1885.416054, 1885.416054, 0.000000, X, Y) && !ellipse(13568.446991, 26573.723022, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(15095.293400, 25866.298000, 1762.400051, 1762.400051, 0.000000, X, Y) && !ellipse(16176.187600, 25149.214000, 1677.048048, 508.916015, 90.002000, X, Y) && !ellipse(15434.910000, 25064.568000, 2260.712065, 1010.912029, 72.162800, X, Y) && !ellipse(13078.217072, 26544.084930, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(16188.368835, 25879.631989, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(14372.341800, 25473.244000, 1809.576052, 993.072029, 112.322900, X, Y) && !ellipse(12836.718262, 21489.409622, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(13350.664000, 25644.682000, 2786.720080, 2786.720080, 0.000000, X, Y) && !ellipse(16583.107971, 26709.639282, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(15837.098000, 24440.682000, 2795.832080, 2795.832080, 0.000000, X, Y) && !ellipse(16657.484000, 24532.568000, 2391.624069, 2391.624069, 0.000000, X, Y) [Sat Jun 1 01:11:45 2013] Writing fullrun_mos1_xmm0095011101_pi300-10000_pass1_cl_src5.gif [Sat Jun 1 01:12:06 2013] Mean detx,y = (1020.19, -12373.76) [Sat Jun 1 01:12:10 2013] Setting backscal keywords in source and bgd. spectrum [Sat Jun 1 01:20:27 2013] Binned source spectrum to 10 counts/bin [Sat Jun 1 01:20:27 2013] Setting source spectrum file to fullrun_mos1_xmm0095011101_pi300-10000_pass1_cl_src5_src_b10.pi.gz [Sat Jun 1 01:20:27 2013] Setting bgd. spectrum file to fullrun_mos1_xmm0095011101_pi300-10000_pass1_cl_src5_bgd.pi.gz [Sat Jun 1 05:19:24 2013] Updating aperture counts using extracted products [Sat Jun 1 05:19:24 2013] Total counts from fullrun_mos1_xmm0095011101_pi300-10000_pass1_cl_src5_src_b10.pi.gz = 57844.00 [Sat Jun 1 05:19:24 2013] Total counts from fullrun_mos1_xmm0095011101_pi300-10000_pass1_cl_src5_bgd.pi.gz = 47511.00 [Sat Jun 1 05:19:24 2013] Got source and background scale factors 13604470.000000, 285129499.000000 [Sat Jun 1 05:19:24 2013] User source parameters: Position = (169.9, 320.5) = 4 33 37.99 -13 15 33.6 Extent = 21.0 (19.8-22.2)" x 14.8 (14.2-16.0)", rotation angle = 129 (120-136) degrees Source aperture counts = 55577.1 +/- 241.5 Background aperture counts = 2266.9 Rate = 2 +/- 0.007 [Sat Jun 1 05:19:30 2013] Calculating source flux in energy range 0.30-8.00 [Sat Jun 1 05:19:30 2013] Using photon index=1.80, rate=0.201, arf fullrun_mos1_xmm0095011101_pi300-10000_pass1_cl_src5.arf [Sat Jun 1 05:19:30 2013] Assuming count rate is from the 0.30-10.00 bandpass [Sat Jun 1 05:19:30 2013] Updating source flux to 4e-12 [Sat Jun 1 05:19:39 2013] Flag b found in src. 5 procflags, skipping spectral fitting [Sat Jun 1 05:19:39 2013] Flag c found in src. 5 procflags, skipping spectral fitting [Sat Jun 1 05:20:02 2013] xmm0095011101/analysis//spectral/fullrun_mos1_xmm0095011101_pi300-10000_pass1_cl_src5_pl.csv not found, spectral fit skipped or did not complete