[Sat May 25 00:05:09 2013] Detection parameters:
  Position = (257.6, 379.2) = 11 41 3.22 66 15 48.2
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 122.1 +/- 19.2
  Background counts = 121.5
  Rate = 0.003 +/- 0.0004

[Sat May 25 00:05:12 2013] Off-axis axis estimate = 6.57'
[Sat May 25 00:05:43 2013] Using EEF radius (= 9.71 ")to estimate initial spatial extent for simple fitting
[Sat May 25 00:05:43 2013] Initial guess for spatial extent in simple fitting = 9.71"
[Sat May 25 00:05:43 2013] source mask rpix=2.2, npix_max = 29, mask sum = 25, frac = 0.837
[Sat May 25 00:05:43 2013] Giving source the simple spatial ID 9 for pass 0, mean size = 9.71"
[Sat May 25 00:05:48 2013] fullrun_pn_xmm0094800201_pi300-10000_cl_pass0_src9.ximg exists
[Sat May 25 00:05:48 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0094800201_pi300-10000_cl_pass0_src9.csv
[Sat May 25 00:05:48 2013] fullrun_pn_xmm0094800201_pi300-10000_cl_pass0_src9_1.ximg exists
[Sat May 25 00:05:48 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0094800201_pi300-10000_cl_pass0_src9.csv
[Sat May 25 00:05:48 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0094800201_pi300-10000_cl_pass0_src9_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0094800201_pi300-10000_cl_pass0_src9.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat May 25 00:05:53 2013] fullrun_pn_xmm0094800201_pi300-10000_cl_pass0_tfrozen_src9.ximg exists
[Sat May 25 00:05:53 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0094800201_pi300-10000_cl_pass0_tfrozen_src9.csv
[Sat May 25 00:05:53 2013] fullrun_pn_xmm0094800201_pi300-10000_cl_pass0_tfrozen_src9_1.ximg exists
[Sat May 25 00:05:53 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0094800201_pi300-10000_cl_pass0_tfrozen_src9.csv
[Sat May 25 00:05:53 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0094800201_pi300-10000_cl_pass0_tfrozen_src9_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0094800201_pi300-10000_cl_pass0_tfrozen_src9.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat May 25 00:06:20 2013] Spatial fit model total counts = 281.088000, observed total counts = 254.000000
[Sat May 25 00:06:20 2013] Poor agreement between spatial fit and data for source 9
It may help to tweak spatial fit manually
Not incorporating fit results
[Sat May 25 00:06:20 2013] Vigneting correction estimate = 1.000000
[Sat May 25 00:06:20 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat May 25 00:06:20 2013] Assessing source extent using major
[Sat May 25 00:06:20 2013] Source does appear to be extended
[Sat May 25 00:06:20 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sat May 25 00:06:36 2013] Using EEF radius (= 9.71 ")to estimate initial spatial extent for simple fitting
[Sat May 25 00:06:36 2013] Initial guess for spatial extent in simple fitting = 9.71"
[Sat May 25 00:06:36 2013] source mask rpix=2.2, npix_max = 29, mask sum = 25, frac = 0.837
[Sat May 25 00:06:36 2013] Giving source the simple spatial ID 9 for pass 1, mean size = 9.71"
[Sat May 25 00:06:39 2013] fullrun_pn_xmm0094800201_pi300-10000_cl_pass1_src9.ximg exists
[Sat May 25 00:06:39 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0094800201_pi300-10000_cl_pass1_src9.csv
[Sat May 25 00:06:39 2013] fullrun_pn_xmm0094800201_pi300-10000_cl_pass1_src9_1.ximg exists
[Sat May 25 00:06:39 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0094800201_pi300-10000_cl_pass1_src9.csv
[Sat May 25 00:06:39 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0094800201_pi300-10000_cl_pass1_src9_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0094800201_pi300-10000_cl_pass1_src9.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat May 25 00:06:44 2013] fullrun_pn_xmm0094800201_pi300-10000_cl_pass1_tfrozen_src9.ximg exists
[Sat May 25 00:06:45 2013] fullrun_pn_xmm0094800201_pi300-10000_cl_pass1_tfrozen_src9_1.ximg exists
[Sat May 25 00:06:45 2013] Fit fullrun_pn_xmm0094800201_pi300-10000_cl_pass1_tfrozen_src9 appears to have run properly
[Sat May 25 00:07:10 2013] Spatial fit model total counts = 279.771000, observed total counts = 254.000000
[Sat May 25 00:07:10 2013] Poor agreement between spatial fit and data for source 9
It may help to tweak spatial fit manually
Not incorporating fit results
[Sat May 25 00:07:10 2013] Warning: source 10 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 9 at 58.165940 pixels away
[Sat May 25 00:07:10 2013] Vigneting correction estimate = 1.000000
[Sat May 25 00:07:10 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat May 25 00:07:10 2013] Assessing source extent using major
[Sat May 25 00:07:10 2013] Source does appear to be extended
[Sat May 25 00:07:10 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sat May 25 00:07:27 2013] XMMSAS src. selection expression = ellipse(22358.980835, 32945.434906, 652.500000, 652.500000, 0.000000, X, Y)
[Sat May 25 00:07:27 2013] Not overwriting source region fullrun_pn_xmm0094800201_pi300-10000_pass1_cl_src9_src.reg
[Sat May 25 00:07:27 2013] Extracting stamp from image fullrun_pn_xmm0094800201_pi300-10000_cl_sm2.00.img.gz, (220, 342) - (295, 417)
[Sat May 25 00:07:27 2013] XMMSAS bgd. selection expression = annulus(22358.980835, 32945.434906, 1087.500000, 2175.000000, X, Y)
[Sat May 25 00:07:27 2013] Writing fullrun_pn_xmm0094800201_pi300-10000_pass1_cl_src9.gif
[Sat May 25 00:09:55 2013] Mean detx,y = (-6962.54, 6542.21) 
[Sat May 25 00:09:57 2013] Setting backscal keywords in source and bgd. spectrum
[Sat May 25 00:10:15 2013] Binned source spectrum to 10 counts/bin
[Sat May 25 00:10:16 2013] Setting source spectrum file to fullrun_pn_xmm0094800201_pi300-10000_pass1_cl_src9_src_b10.pi.gz
[Sat May 25 00:10:16 2013] Setting bgd. spectrum file to fullrun_pn_xmm0094800201_pi300-10000_pass1_cl_src9_bgd.pi.gz
[Sat May 25 00:34:30 2013] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Sat May 25 00:34:30 2013] rmf not generated due to insufficient counts
[Sat May 25 01:32:24 2013] Updating aperture counts using extracted products
[Sat May 25 01:32:24 2013] Total counts from fullrun_pn_xmm0094800201_pi300-10000_pass1_cl_src9_src_b10.pi.gz = 192.00
[Sat May 25 01:32:24 2013] Total counts from fullrun_pn_xmm0094800201_pi300-10000_pass1_cl_src9_bgd.pi.gz = 1326.00
[Sat May 25 01:32:25 2013] Got source and background scale factors 1249742.000000, 10714068.000000
[Sat May 25 01:32:25 2013] User source parameters:
  Position = (257.6, 379.2) = 11 41 3.22 66 15 48.2
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 37.3 +/- 14.9
  Background aperture counts = 154.7
  Rate = 0.003 +/- 0.001

[Sat May 25 01:32:25 2013] Updating counts from extracted products
[Sat May 25 01:32:25 2013] Set source signif. to 37.33/12.44 = 3.00
[Sat May 25 01:32:41 2013] Calculating source flux in energy range 0.30-8.00
[Sat May 25 01:32:41 2013] Using photon index=1.80, rate=0.00269, arf fullrun_pn_xmm0094800201_pi300-10000_pass1_cl_src9.arf
[Sat May 25 01:32:41 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Sat May 25 01:32:41 2013] Updating source flux to 1.2e-14
[Sat May 25 01:33:24 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Sat May 25 01:33:31 2013] xmm0094800201/analysis//spectral/fullrun_pn_xmm0094800201_pi300-10000_pass1_cl_src9_pl.csv not found, spectral fit skipped or did not complete