[Sat May 25 00:05:12 2013] Detection parameters:
  Position = (310.7, 192.9) = 11 40 25.02 66 2 16.5
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 171.4 +/- 21.0
  Background counts = 124.3
  Rate = 0.006 +/- 0.0007

[Sat May 25 00:05:12 2013] Off-axis axis estimate = 7.70'
[Sat May 25 00:05:43 2013] Using EEF radius (= 10.28 ")to estimate initial spatial extent for simple fitting
[Sat May 25 00:05:43 2013] Initial guess for spatial extent in simple fitting = 10.28"
[Sat May 25 00:05:43 2013] source mask rpix=2.4, npix_max = 32, mask sum = 36, frac = 1.098
[Sat May 25 00:05:43 2013] Giving source the simple spatial ID 26 for pass 0, mean size = 10.28"
[Sat May 25 00:05:51 2013] fullrun_pn_xmm0094800201_pi300-10000_cl_pass0_src26.ximg exists
[Sat May 25 00:05:51 2013] fullrun_pn_xmm0094800201_pi300-10000_cl_pass0_src26_1.ximg exists
[Sat May 25 00:05:51 2013] Fit fullrun_pn_xmm0094800201_pi300-10000_cl_pass0_src26 appears to have run properly
[Sat May 25 00:05:56 2013] fullrun_pn_xmm0094800201_pi300-10000_cl_pass0_tfrozen_src26.ximg exists
[Sat May 25 00:05:56 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0094800201_pi300-10000_cl_pass0_tfrozen_src26.csv
[Sat May 25 00:05:56 2013] fullrun_pn_xmm0094800201_pi300-10000_cl_pass0_tfrozen_src26_1.ximg exists
[Sat May 25 00:05:56 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0094800201_pi300-10000_cl_pass0_tfrozen_src26.csv
[Sat May 25 00:05:56 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0094800201_pi300-10000_cl_pass0_tfrozen_src26_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0094800201_pi300-10000_cl_pass0_tfrozen_src26.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat May 25 00:06:20 2013] Warning: source 26 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 27 at 12.956107 pixels away
[Sat May 25 00:06:20 2013] Source 27 is offset by 7.916016 and -5.347269 pixels which is larger than
2 X fitted extent = 1.473090 x 1.473090, not incorporating fit results
[Sat May 25 00:06:20 2013] Vigneting correction estimate = 1.000000
[Sat May 25 00:06:20 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat May 25 00:06:20 2013] Assessing source extent using major
[Sat May 25 00:06:20 2013] Source does appear to be extended
[Sat May 25 00:06:20 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sat May 25 00:06:36 2013] Using EEF radius (= 10.28 ")to estimate initial spatial extent for simple fitting
[Sat May 25 00:06:36 2013] Initial guess for spatial extent in simple fitting = 10.28"
[Sat May 25 00:06:36 2013] source mask rpix=2.4, npix_max = 32, mask sum = 36, frac = 1.098
[Sat May 25 00:06:36 2013] Giving source the simple spatial ID 25 for pass 1, mean size = 10.28"
[Sat May 25 00:06:42 2013] fullrun_pn_xmm0094800201_pi300-10000_cl_pass1_src25.ximg exists
[Sat May 25 00:06:42 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0094800201_pi300-10000_cl_pass1_src25.csv
[Sat May 25 00:06:42 2013] fullrun_pn_xmm0094800201_pi300-10000_cl_pass1_src25_1.ximg exists
[Sat May 25 00:06:42 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0094800201_pi300-10000_cl_pass1_src25.csv
[Sat May 25 00:06:42 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0094800201_pi300-10000_cl_pass1_src25_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0094800201_pi300-10000_cl_pass1_src25.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat May 25 00:06:48 2013] fullrun_pn_xmm0094800201_pi300-10000_cl_pass1_tfrozen_src25.ximg exists
[Sat May 25 00:06:48 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0094800201_pi300-10000_cl_pass1_tfrozen_src25.csv
[Sat May 25 00:06:48 2013] fullrun_pn_xmm0094800201_pi300-10000_cl_pass1_tfrozen_src25_1.ximg exists
[Sat May 25 00:06:48 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0094800201_pi300-10000_cl_pass1_tfrozen_src25.csv
[Sat May 25 00:06:48 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0094800201_pi300-10000_cl_pass1_tfrozen_src25_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0094800201_pi300-10000_cl_pass1_tfrozen_src25.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat May 25 00:07:10 2013] Warning, spatial fit 25 centroid is now closest to src. 28
[Sat May 25 00:07:10 2013] Vigneting correction estimate = 1.000000
[Sat May 25 00:07:10 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat May 25 00:07:10 2013] Assessing source extent using major
[Sat May 25 00:07:10 2013] Source does appear to be extended
[Sat May 25 00:07:10 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sat May 25 00:07:27 2013] XMMSAS src. selection expression = ellipse(26981.421356, 16734.679611, 652.500000, 652.500000, 0.000000, X, Y)
[Sat May 25 00:07:27 2013] Not overwriting source region fullrun_pn_xmm0094800201_pi300-10000_pass1_cl_src27_src.reg
[Sat May 25 00:07:27 2013] Extracting stamp from image fullrun_pn_xmm0094800201_pi300-10000_cl_sm2.00.img.gz, (273, 155) - (348, 230)
[Sat May 25 00:07:27 2013] XMMSAS bgd. selection expression = annulus(26981.421356, 16734.679611, 1087.500000, 2175.000000, X, Y) && !ellipse(27301.854187, 14569.894836, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27237.182983, 19366.882294, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24586.823883, 17854.148819, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25341.770844, 16715.203644, 870.000000, 870.000000, 0.000000, X, Y)
[Sat May 25 00:07:27 2013] Writing fullrun_pn_xmm0094800201_pi300-10000_pass1_cl_src27.gif
[Sat May 25 00:17:30 2013] Mean detx,y = (7652.16, -1695.10) 
[Sat May 25 00:17:33 2013] Setting backscal keywords in source and bgd. spectrum
[Sat May 25 00:18:02 2013] Binned source spectrum to 10 counts/bin
[Sat May 25 00:18:03 2013] Setting source spectrum file to fullrun_pn_xmm0094800201_pi300-10000_pass1_cl_src27_src_b10.pi.gz
[Sat May 25 00:18:03 2013] Setting bgd. spectrum file to fullrun_pn_xmm0094800201_pi300-10000_pass1_cl_src27_bgd.pi.gz
[Sat May 25 00:43:03 2013] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Sat May 25 00:43:03 2013] rmf not generated due to insufficient counts
[Sat May 25 01:32:37 2013] Updating aperture counts using extracted products
[Sat May 25 01:32:37 2013] Total counts from fullrun_pn_xmm0094800201_pi300-10000_pass1_cl_src27_src_b10.pi.gz = 239.00
[Sat May 25 01:32:37 2013] Total counts from fullrun_pn_xmm0094800201_pi300-10000_pass1_cl_src27_bgd.pi.gz = 949.00
[Sat May 25 01:32:37 2013] Got source and background scale factors 1246078.000000, 6895248.000000
[Sat May 25 01:32:37 2013] User source parameters:
  Position = (310.7, 192.9) = 11 40 25.02 66 2 16.5
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 67.5 +/- 16.5
  Background aperture counts = 171.5
  Rate = 0.005 +/- 0.001

[Sat May 25 01:32:37 2013] Updating counts from extracted products
[Sat May 25 01:32:37 2013] Set source signif. to 67.50/13.10 = 5.15
[Sat May 25 01:32:47 2013] Calculating source flux in energy range 0.30-8.00
[Sat May 25 01:32:47 2013] Using photon index=1.80, rate=0.00487, arf fullrun_pn_xmm0094800201_pi300-10000_pass1_cl_src27.arf
[Sat May 25 01:32:47 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Sat May 25 01:32:47 2013] Updating source flux to 1.7e-14
[Sat May 25 01:33:24 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Sat May 25 01:33:31 2013] xmm0094800201/analysis//spectral/fullrun_pn_xmm0094800201_pi300-10000_pass1_cl_src27_pl.csv not found, spectral fit skipped or did not complete