[Sat May 25 00:05:18 2013] Detection parameters:
  Position = (292.2, 193.0) = 11 40 38.20 66 2 17.9
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 91.6 +/- 16.9
  Background counts = 96.7
  Rate = 0.002 +/- 0.0005

[Sat May 25 00:05:18 2013] Off-axis axis estimate = 7.65'
[Sat May 25 00:06:03 2013] Using EEF radius (= 10.26 ")to estimate initial spatial extent for simple fitting
[Sat May 25 00:06:03 2013] Initial guess for spatial extent in simple fitting = 10.26"
[Sat May 25 00:06:03 2013] source mask rpix=2.4, npix_max = 32, mask sum = 36, frac = 1.102
[Sat May 25 00:06:03 2013] Giving source the simple spatial ID 15 for pass 0, mean size = 10.26"
[Sat May 25 00:06:07 2013] fullrun_mos2_xmm0094800201_pi300-10000_cl_pass0_src15.ximg exists
[Sat May 25 00:06:07 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0094800201_pi300-10000_cl_pass0_src15.csv
[Sat May 25 00:06:07 2013] fullrun_mos2_xmm0094800201_pi300-10000_cl_pass0_src15_1.ximg exists
[Sat May 25 00:06:07 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0094800201_pi300-10000_cl_pass0_src15.csv
[Sat May 25 00:06:07 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0094800201_pi300-10000_cl_pass0_src15_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0094800201_pi300-10000_cl_pass0_src15.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat May 25 00:06:10 2013] fullrun_mos2_xmm0094800201_pi300-10000_cl_pass0_tfrozen_src15.ximg exists
[Sat May 25 00:06:10 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0094800201_pi300-10000_cl_pass0_tfrozen_src15.csv
[Sat May 25 00:06:10 2013] fullrun_mos2_xmm0094800201_pi300-10000_cl_pass0_tfrozen_src15_1.ximg exists
[Sat May 25 00:06:10 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0094800201_pi300-10000_cl_pass0_tfrozen_src15.csv
[Sat May 25 00:06:10 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0094800201_pi300-10000_cl_pass0_tfrozen_src15_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0094800201_pi300-10000_cl_pass0_tfrozen_src15.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat May 25 00:06:27 2013] Warning, spatial fit 15 centroid is now closest to src. 19
[Sat May 25 00:06:27 2013] Vigneting correction estimate = 1.000000
[Sat May 25 00:06:27 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat May 25 00:06:27 2013] Assessing source extent using major
[Sat May 25 00:06:27 2013] Source does appear to be extended
[Sat May 25 00:06:27 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sat May 25 00:06:55 2013] Using EEF radius (= 10.26 ")to estimate initial spatial extent for simple fitting
[Sat May 25 00:06:55 2013] Initial guess for spatial extent in simple fitting = 10.26"
[Sat May 25 00:06:55 2013] source mask rpix=2.4, npix_max = 32, mask sum = 36, frac = 1.102
[Sat May 25 00:06:55 2013] Giving source the simple spatial ID 15 for pass 1, mean size = 10.26"
[Sat May 25 00:06:59 2013] fullrun_mos2_xmm0094800201_pi300-10000_cl_pass1_src15.ximg exists
[Sat May 25 00:06:59 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0094800201_pi300-10000_cl_pass1_src15.csv
[Sat May 25 00:06:59 2013] fullrun_mos2_xmm0094800201_pi300-10000_cl_pass1_src15_1.ximg exists
[Sat May 25 00:06:59 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0094800201_pi300-10000_cl_pass1_src15.csv
[Sat May 25 00:06:59 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0094800201_pi300-10000_cl_pass1_src15_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0094800201_pi300-10000_cl_pass1_src15.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat May 25 00:07:02 2013] fullrun_mos2_xmm0094800201_pi300-10000_cl_pass1_tfrozen_src15.ximg exists
[Sat May 25 00:07:03 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0094800201_pi300-10000_cl_pass1_tfrozen_src15.csv
[Sat May 25 00:07:03 2013] fullrun_mos2_xmm0094800201_pi300-10000_cl_pass1_tfrozen_src15_1.ximg exists
[Sat May 25 00:07:03 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0094800201_pi300-10000_cl_pass1_tfrozen_src15.csv
[Sat May 25 00:07:03 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0094800201_pi300-10000_cl_pass1_tfrozen_src15_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0094800201_pi300-10000_cl_pass1_tfrozen_src15.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat May 25 00:07:17 2013] Source 20 is offset by 0.188352 and -4.921033 pixels which is larger than
2 X fitted extent = 1.129228 x 1.129228, not incorporating fit results
[Sat May 25 00:07:17 2013] Spatial fit model total counts = 334.078000, observed total counts = 296.000000
[Sat May 25 00:07:17 2013] Poor agreement between spatial fit and data for source 20
It may help to tweak spatial fit manually
Not incorporating fit results
[Sat May 25 00:07:17 2013] Vigneting correction estimate = 1.000000
[Sat May 25 00:07:17 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat May 25 00:07:17 2013] Assessing source extent using major
[Sat May 25 00:07:17 2013] Source does appear to be extended
[Sat May 25 00:07:17 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sat May 25 01:03:34 2013] XMMSAS src. selection expression = ellipse(25374.828613, 16746.428116, 652.500000, 652.500000, 0.000000, X, Y)
[Sat May 25 01:03:34 2013] Writing source region out to fullrun_mos2_xmm0094800201_pi300-10000_pass1_cl_src20_src.reg
[Sat May 25 01:03:34 2013] Extracting stamp from image fullrun_mos2_xmm0094800201_pi300-10000_cl_sm2.00.img.gz, (255, 156) - (330, 231)
[Sat May 25 01:03:34 2013] XMMSAS bgd. selection expression = annulus(25374.828613, 16746.428116, 1087.500000, 2175.000000, X, Y) && !ellipse(24608.074738, 17871.360046, 870.000000, 870.000000, 0.000000, X, Y)
[Sat May 25 01:03:34 2013] Writing fullrun_mos2_xmm0094800201_pi300-10000_pass1_cl_src20.gif
[Sat May 25 01:09:23 2013] Mean detx,y = (-7846.53, 44.14) 
[Sat May 25 01:09:26 2013] Setting backscal keywords in source and bgd. spectrum
[Sat May 25 01:09:44 2013] Binned source spectrum to 10 counts/bin
[Sat May 25 01:09:45 2013] Setting source spectrum file to fullrun_mos2_xmm0094800201_pi300-10000_pass1_cl_src20_src_b10.pi.gz
[Sat May 25 01:09:45 2013] Setting bgd. spectrum file to fullrun_mos2_xmm0094800201_pi300-10000_pass1_cl_src20_bgd.pi.gz
[Sat May 25 01:26:39 2013] Not generating rmf since there are only 91 counts
[Sat May 25 01:26:39 2013] rmf not generated due to insufficient counts
[Sat May 25 01:33:07 2013] Updating aperture counts using extracted products
[Sat May 25 01:33:07 2013] Total counts from fullrun_mos2_xmm0094800201_pi300-10000_pass1_cl_src20_src_b10.pi.gz = 226.00
[Sat May 25 01:33:07 2013] Total counts from fullrun_mos2_xmm0094800201_pi300-10000_pass1_cl_src20_bgd.pi.gz = 1308.00
[Sat May 25 01:33:07 2013] Got source and background scale factors 1197684.000000, 8944026.000000
[Sat May 25 01:33:07 2013] User source parameters:
  Position = (292.2, 193.0) = 11 40 38.20 66 2 17.9
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 50.8 +/- 16.1
  Background aperture counts = 175.2
  Rate = 0.002 +/- 0.0005

[Sat May 25 01:33:07 2013] Updating counts from extracted products
[Sat May 25 01:33:07 2013] Set source signif. to 50.85/13.23 = 3.84
[Sat May 25 01:33:12 2013] Calculating source flux in energy range 0.30-8.00
[Sat May 25 01:33:12 2013] Using photon index=1.80, rate=0.00168, arf fullrun_mos2_xmm0094800201_pi300-10000_pass1_cl_src20.arf
[Sat May 25 01:33:12 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Sat May 25 01:33:12 2013] Updating source flux to 2.4e-14
[Sat May 25 01:33:18 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Sat May 25 01:33:24 2013] xmm0094800201/analysis//spectral/fullrun_mos2_xmm0094800201_pi300-10000_pass1_cl_src20_pl.csv not found, spectral fit skipped or did not complete