[Sat May 25 00:05:17 2013] Detection parameters:
  Position = (241.8, 231.5) = 11 41 14.29 66 5 5.2
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 131.6 +/- 19.4
  Background counts = 95.4
  Rate = 0.003 +/- 0.0005

[Sat May 25 00:05:18 2013] Off-axis axis estimate = 6.36'
[Sat May 25 00:06:03 2013] Using EEF radius (= 9.61 ")to estimate initial spatial extent for simple fitting
[Sat May 25 00:06:03 2013] Initial guess for spatial extent in simple fitting = 9.61"
[Sat May 25 00:06:03 2013] source mask rpix=2.2, npix_max = 29, mask sum = 30, frac = 1.022
[Sat May 25 00:06:03 2013] Giving source the simple spatial ID 11 for pass 0, mean size = 9.61"
[Sat May 25 00:06:05 2013] fullrun_mos2_xmm0094800201_pi300-10000_cl_pass0_src11.ximg exists
[Sat May 25 00:06:06 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0094800201_pi300-10000_cl_pass0_src11.csv
[Sat May 25 00:06:06 2013] fullrun_mos2_xmm0094800201_pi300-10000_cl_pass0_src11_1.ximg exists
[Sat May 25 00:06:06 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0094800201_pi300-10000_cl_pass0_src11.csv
[Sat May 25 00:06:06 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0094800201_pi300-10000_cl_pass0_src11_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0094800201_pi300-10000_cl_pass0_src11.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat May 25 00:06:09 2013] fullrun_mos2_xmm0094800201_pi300-10000_cl_pass0_tfrozen_src11.ximg exists
[Sat May 25 00:06:09 2013] fullrun_mos2_xmm0094800201_pi300-10000_cl_pass0_tfrozen_src11_1.ximg exists
[Sat May 25 00:06:09 2013] Fit fullrun_mos2_xmm0094800201_pi300-10000_cl_pass0_tfrozen_src11 appears to have run properly
[Sat May 25 00:06:27 2013] Spatial fit model total counts = 314.997000, observed total counts = 315.000000
[Sat May 25 00:06:27 2013] Offset between fit and detection position for source 16 = 0.180172 pixels
[Sat May 25 00:06:27 2013] 315.727500 total counts/ 252.301000 bgd. counts: snr = 3.993110
Spatial fit parameters:
  Offset between fit and detection position for source 16 = 0.180172 pixels
  Position = (241.9, 231.7) = 11 41 14.24 66 5 5.1
  Extent = 5.5 (4.0-7.4)", rotation angle = 0
  Source counts = 63.4 +/- 17.8
  Background counts = 252.3
  Rate = 0.002 +/- 0.0006
[Sat May 25 00:06:27 2013] Vigneting correction estimate = 1.000000
[Sat May 25 00:06:27 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat May 25 00:06:27 2013] Assessing source extent using major axis lower bound
[Sat May 25 00:06:27 2013] Source does appear to be extended
[Sat May 25 00:06:27 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sat May 25 00:06:55 2013] Using previous fit value to estimate initial spatial extent for simple fitting
[Sat May 25 00:06:55 2013] Initial guess for spatial extent in simple fitting = 5.50"
[Sat May 25 00:06:55 2013] source mask rpix=1.3, npix_max = 12, mask sum = 12, frac = 0.963
[Sat May 25 00:06:55 2013] Giving source the simple spatial ID 11 for pass 1, mean size = 5.50"
[Sat May 25 00:06:58 2013] fullrun_mos2_xmm0094800201_pi300-10000_cl_pass1_src11.ximg exists
[Sat May 25 00:06:58 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0094800201_pi300-10000_cl_pass1_src11.csv
[Sat May 25 00:06:58 2013] fullrun_mos2_xmm0094800201_pi300-10000_cl_pass1_src11_1.ximg exists
[Sat May 25 00:06:58 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0094800201_pi300-10000_cl_pass1_src11.csv
[Sat May 25 00:06:58 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0094800201_pi300-10000_cl_pass1_src11_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0094800201_pi300-10000_cl_pass1_src11.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat May 25 00:07:02 2013] fullrun_mos2_xmm0094800201_pi300-10000_cl_pass1_tfrozen_src11.ximg exists
[Sat May 25 00:07:02 2013] fullrun_mos2_xmm0094800201_pi300-10000_cl_pass1_tfrozen_src11_1.ximg exists
[Sat May 25 00:07:02 2013] Fit fullrun_mos2_xmm0094800201_pi300-10000_cl_pass1_tfrozen_src11 appears to have run properly
[Sat May 25 00:07:17 2013] Spatial fit model total counts = 314.996000, observed total counts = 315.000000
[Sat May 25 00:07:17 2013] Offset between fit and detection position for source 16 = 0.000613 pixels
[Sat May 25 00:07:17 2013] 315.725800 total counts/ 252.325000 bgd. counts: snr = 3.991302
Spatial fit parameters:
  Offset between fit and detection position for source 16 = 0.000613 pixels
  Position = (241.9, 231.7) = 11 41 14.24 66 5 5.1
  Extent = 5.5 (4.0-7.4)", rotation angle = 0
  Source counts = 63.4 +/- 17.8
  Background counts = 252.3
  Rate = 0.002 +/- 0.0006
[Sat May 25 00:07:17 2013] Vigneting correction estimate = 1.000000
[Sat May 25 00:07:17 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat May 25 00:07:17 2013] Assessing source extent using major axis lower bound
[Sat May 25 00:07:17 2013] Source does appear to be extended
[Sat May 25 00:07:17 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sat May 25 01:03:33 2013] XMMSAS src. selection expression = ellipse(20993.440720, 20108.597000, 330.046209, 330.046209, 0.000000, X, Y)
[Sat May 25 01:03:33 2013] Writing source region out to fullrun_mos2_xmm0094800201_pi300-10000_pass1_cl_src16_src.reg
[Sat May 25 01:03:33 2013] Extracting stamp from image fullrun_mos2_xmm0094800201_pi300-10000_cl_sm2.00.img.gz, (223, 213) - (261, 251)
[Sat May 25 01:03:33 2013] XMMSAS bgd. selection expression = annulus(20993.440720, 20108.597000, 550.077016, 1100.154032, X, Y)
[Sat May 25 01:03:33 2013] Writing fullrun_mos2_xmm0094800201_pi300-10000_pass1_cl_src16.gif
[Sat May 25 01:07:43 2013] Mean detx,y = (-5638.59, -4987.45) 
[Sat May 25 01:07:47 2013] Setting backscal keywords in source and bgd. spectrum
[Sat May 25 01:08:01 2013] Binned source spectrum to 10 counts/bin
[Sat May 25 01:08:02 2013] Setting source spectrum file to fullrun_mos2_xmm0094800201_pi300-10000_pass1_cl_src16_src_b10.pi.gz
[Sat May 25 01:08:02 2013] Setting bgd. spectrum file to fullrun_mos2_xmm0094800201_pi300-10000_pass1_cl_src16_bgd.pi.gz
[Sat May 25 01:26:02 2013] Not generating rmf since there are only 63 counts
[Sat May 25 01:26:02 2013] rmf not generated due to insufficient counts
[Sat May 25 01:33:04 2013] Updating aperture counts using extracted products
[Sat May 25 01:33:04 2013] Total counts from fullrun_mos2_xmm0094800201_pi300-10000_pass1_cl_src16_src_b10.pi.gz = 110.00
[Sat May 25 01:33:04 2013] Total counts from fullrun_mos2_xmm0094800201_pi300-10000_pass1_cl_src16_bgd.pi.gz = 348.00
[Sat May 25 01:33:04 2013] Got source and background scale factors 339980.000000, 2769260.000000
[Sat May 25 01:33:04 2013] User source parameters:
  Position = (241.9, 231.7) = 11 41 14.24 66 5 5.1
  Extent = 5.5 (4.0-7.4)", rotation angle = 0
  Source aperture counts = 67.3 +/- 11.5
  Background aperture counts = 42.7
  Rate = 0.002 +/- 0.0004

[Sat May 25 01:33:11 2013] Calculating source flux in energy range 0.30-8.00
[Sat May 25 01:33:11 2013] Using photon index=1.80, rate=0.00209, arf fullrun_mos2_xmm0094800201_pi300-10000_pass1_cl_src16.arf
[Sat May 25 01:33:11 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Sat May 25 01:33:11 2013] Updating source flux to 3.3e-14
[Sat May 25 01:33:18 2013] Source 16 has fewer than 100.000000 counts, skipping spectral fitting
[Sat May 25 01:33:24 2013] xmm0094800201/analysis//spectral/fullrun_mos2_xmm0094800201_pi300-10000_pass1_cl_src16_pl.csv not found, spectral fit skipped or did not complete