[Sat May 25 00:05:17 2013] Detection parameters:
  Position = (123.3, 250.7) = 11 42 39.17 66 6 23.8
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 96.4 +/- 17.4
  Background counts = 69.6
  Rate = 0.002 +/- 0.0003

[Sat May 25 00:05:18 2013] Off-axis axis estimate = 13.16'
[Sat May 25 00:06:03 2013] Using EEF radius (= 13.01 ")to estimate initial spatial extent for simple fitting
[Sat May 25 00:06:03 2013] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Sat May 25 00:06:03 2013] Initial guess for spatial extent in simple fitting = 13.01"
[Sat May 25 00:06:03 2013] source mask rpix=3.0, npix_max = 48, mask sum = 49, frac = 1.005
[Sat May 25 00:06:03 2013] Giving source the simple spatial ID 19 for pass 0, mean size = 13.01"
[Sat May 25 00:06:07 2013] fullrun_mos2_xmm0094800201_pi300-10000_cl_pass0_src19.ximg exists
[Sat May 25 00:06:07 2013] fullrun_mos2_xmm0094800201_pi300-10000_cl_pass0_src19_1.ximg exists
[Sat May 25 00:06:07 2013] Fit fullrun_mos2_xmm0094800201_pi300-10000_cl_pass0_src19 appears to have run properly
[Sat May 25 00:06:11 2013] fullrun_mos2_xmm0094800201_pi300-10000_cl_pass0_tfrozen_src19.ximg exists
[Sat May 25 00:06:11 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0094800201_pi300-10000_cl_pass0_tfrozen_src19.csv
[Sat May 25 00:06:11 2013] fullrun_mos2_xmm0094800201_pi300-10000_cl_pass0_tfrozen_src19_1.ximg exists
[Sat May 25 00:06:11 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0094800201_pi300-10000_cl_pass0_tfrozen_src19.csv
[Sat May 25 00:06:11 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0094800201_pi300-10000_cl_pass0_tfrozen_src19_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0094800201_pi300-10000_cl_pass0_tfrozen_src19.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat May 25 00:06:27 2013] Warning: source 19 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 15 at 18.088323 pixels away
[Sat May 25 00:06:27 2013] Vigneting correction estimate = 1.000000
[Sat May 25 00:06:27 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat May 25 00:06:27 2013] Assessing source extent using major
[Sat May 25 00:06:27 2013] Source does appear to be extended
[Sat May 25 00:06:27 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sat May 25 00:06:55 2013] Using EEF radius (= 13.01 ")to estimate initial spatial extent for simple fitting
[Sat May 25 00:06:55 2013] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Sat May 25 00:06:55 2013] Initial guess for spatial extent in simple fitting = 13.01"
[Sat May 25 00:06:55 2013] source mask rpix=3.0, npix_max = 48, mask sum = 49, frac = 1.005
[Sat May 25 00:06:55 2013] Giving source the simple spatial ID 19 for pass 1, mean size = 13.01"
[Sat May 25 00:06:59 2013] fullrun_mos2_xmm0094800201_pi300-10000_cl_pass1_src19.ximg exists
[Sat May 25 00:06:59 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0094800201_pi300-10000_cl_pass1_src19.csv
[Sat May 25 00:06:59 2013] fullrun_mos2_xmm0094800201_pi300-10000_cl_pass1_src19_1.ximg exists
[Sat May 25 00:06:59 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0094800201_pi300-10000_cl_pass1_src19.csv
[Sat May 25 00:06:59 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0094800201_pi300-10000_cl_pass1_src19_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0094800201_pi300-10000_cl_pass1_src19.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat May 25 00:07:03 2013] fullrun_mos2_xmm0094800201_pi300-10000_cl_pass1_tfrozen_src19.ximg exists
[Sat May 25 00:07:03 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0094800201_pi300-10000_cl_pass1_tfrozen_src19.csv
[Sat May 25 00:07:03 2013] fullrun_mos2_xmm0094800201_pi300-10000_cl_pass1_tfrozen_src19_1.ximg exists
[Sat May 25 00:07:03 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0094800201_pi300-10000_cl_pass1_tfrozen_src19.csv
[Sat May 25 00:07:03 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0094800201_pi300-10000_cl_pass1_tfrozen_src19_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0094800201_pi300-10000_cl_pass1_tfrozen_src19.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat May 25 00:07:17 2013] Warning: source 19 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 15 at 16.065227 pixels away
[Sat May 25 00:07:17 2013] Vigneting correction estimate = 1.000000
[Sat May 25 00:07:17 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat May 25 00:07:17 2013] Assessing source extent using major
[Sat May 25 00:07:17 2013] Source does appear to be extended
[Sat May 25 00:07:17 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sat May 25 01:03:35 2013] XMMSAS src. selection expression = ellipse(10677.489799, 21764.291443, 652.500000, 652.500000, 0.000000, X, Y)
[Sat May 25 01:03:35 2013] Writing source region out to fullrun_mos2_xmm0094800201_pi300-10000_pass1_cl_src15_src.reg
[Sat May 25 01:03:35 2013] Extracting stamp from image fullrun_mos2_xmm0094800201_pi300-10000_cl_sm2.00.img.gz, (86, 213) - (161, 288)
[Sat May 25 01:03:35 2013] XMMSAS bgd. selection expression = annulus(10677.489799, 21764.291443, 1087.500000, 2175.000000, X, Y) && !ellipse(11106.557800, 19012.157104, 870.000000, 870.000000, 0.000000, X, Y)
[Sat May 25 01:03:35 2013] Writing fullrun_mos2_xmm0094800201_pi300-10000_pass1_cl_src15.gif
[Sat May 25 01:10:47 2013] Mean detx,y = (-6581.95, -15389.29) 
[Sat May 25 01:10:50 2013] Setting backscal keywords in source and bgd. spectrum
[Sat May 25 01:11:12 2013] Binned source spectrum to 10 counts/bin
[Sat May 25 01:11:12 2013] Setting source spectrum file to fullrun_mos2_xmm0094800201_pi300-10000_pass1_cl_src15_src_b10.pi.gz
[Sat May 25 01:11:12 2013] Setting bgd. spectrum file to fullrun_mos2_xmm0094800201_pi300-10000_pass1_cl_src15_bgd.pi.gz
[Sat May 25 01:27:09 2013] Not generating rmf since there are only 96 counts
[Sat May 25 01:27:09 2013] rmf not generated due to insufficient counts
[Sat May 25 01:33:09 2013] Updating aperture counts using extracted products
[Sat May 25 01:33:09 2013] Total counts from fullrun_mos2_xmm0094800201_pi300-10000_pass1_cl_src15_src_b10.pi.gz = 166.00
[Sat May 25 01:33:09 2013] Total counts from fullrun_mos2_xmm0094800201_pi300-10000_pass1_cl_src15_bgd.pi.gz = 711.00
[Sat May 25 01:33:09 2013] Got source and background scale factors 1267894.000000, 6511261.000000
[Sat May 25 01:33:09 2013] User source parameters:
  Position = (123.3, 250.7) = 11 42 39.17 66 6 23.8
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 27.6 +/- 13.9
  Background aperture counts = 138.4
  Rate = 0.0009 +/- 0.0005

[Sat May 25 01:33:09 2013] Updating counts from extracted products
[Sat May 25 01:33:09 2013] Set source signif. to 27.55/11.77 = 2.34
[Sat May 25 01:33:12 2013] Calculating source flux in energy range 0.30-8.00
[Sat May 25 01:33:12 2013] Using photon index=1.80, rate=0.00091, arf fullrun_mos2_xmm0094800201_pi300-10000_pass1_cl_src15.arf
[Sat May 25 01:33:12 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Sat May 25 01:33:12 2013] Updating source flux to 2.4e-14
[Sat May 25 01:33:18 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Sat May 25 01:33:24 2013] xmm0094800201/analysis//spectral/fullrun_mos2_xmm0094800201_pi300-10000_pass1_cl_src15_pl.csv not found, spectral fit skipped or did not complete