[Sat May 25 00:05:17 2013] Detection parameters:
  Position = (316.7, 269.4) = 11 40 20.71 66 7 58.6
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 103.4 +/- 17.0
  Background counts = 102.2
  Rate = 0.003 +/- 0.0004

[Sat May 25 00:05:18 2013] Off-axis axis estimate = 2.49'
[Sat May 25 00:06:03 2013] Using EEF radius (= 7.67 ")to estimate initial spatial extent for simple fitting
[Sat May 25 00:06:03 2013] Initial guess for spatial extent in simple fitting = 7.67"
[Sat May 25 00:06:03 2013] source mask rpix=1.8, npix_max = 20, mask sum = 24, frac = 1.171
[Sat May 25 00:06:03 2013] Giving source the simple spatial ID 14 for pass 0, mean size = 7.67"
[Sat May 25 00:06:06 2013] fullrun_mos2_xmm0094800201_pi300-10000_cl_pass0_src14.ximg exists
[Sat May 25 00:06:07 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0094800201_pi300-10000_cl_pass0_src14.csv
[Sat May 25 00:06:07 2013] fullrun_mos2_xmm0094800201_pi300-10000_cl_pass0_src14_1.ximg exists
[Sat May 25 00:06:07 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0094800201_pi300-10000_cl_pass0_src14.csv
[Sat May 25 00:06:07 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0094800201_pi300-10000_cl_pass0_src14_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0094800201_pi300-10000_cl_pass0_src14.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat May 25 00:06:10 2013] fullrun_mos2_xmm0094800201_pi300-10000_cl_pass0_tfrozen_src14.ximg exists
[Sat May 25 00:06:10 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0094800201_pi300-10000_cl_pass0_tfrozen_src14.csv
[Sat May 25 00:06:10 2013] fullrun_mos2_xmm0094800201_pi300-10000_cl_pass0_tfrozen_src14_1.ximg exists
[Sat May 25 00:06:10 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0094800201_pi300-10000_cl_pass0_tfrozen_src14.csv
[Sat May 25 00:06:10 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0094800201_pi300-10000_cl_pass0_tfrozen_src14_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0094800201_pi300-10000_cl_pass0_tfrozen_src14.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat May 25 00:06:27 2013] Warning, spatial fit 14 centroid is now closest to src. 1
[Sat May 25 00:06:27 2013] Vigneting correction estimate = 1.000000
[Sat May 25 00:06:27 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat May 25 00:06:27 2013] Assessing source extent using major
[Sat May 25 00:06:27 2013] Source does appear to be extended
[Sat May 25 00:06:27 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sat May 25 00:06:27 2013] Source is confused with source 12
[Sat May 25 00:06:55 2013] Using EEF radius (= 7.67 ")to estimate initial spatial extent for simple fitting
[Sat May 25 00:06:55 2013] Initial guess for spatial extent in simple fitting = 7.67"
[Sat May 25 00:06:55 2013] source mask rpix=1.8, npix_max = 20, mask sum = 24, frac = 1.171
[Sat May 25 00:06:55 2013] Giving source the simple spatial ID 14 for pass 1, mean size = 7.67"
[Sat May 25 00:06:58 2013] fullrun_mos2_xmm0094800201_pi300-10000_cl_pass1_src14.ximg exists
[Sat May 25 00:06:59 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0094800201_pi300-10000_cl_pass1_src14.csv
[Sat May 25 00:06:59 2013] fullrun_mos2_xmm0094800201_pi300-10000_cl_pass1_src14_1.ximg exists
[Sat May 25 00:06:59 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0094800201_pi300-10000_cl_pass1_src14.csv
[Sat May 25 00:06:59 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0094800201_pi300-10000_cl_pass1_src14_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0094800201_pi300-10000_cl_pass1_src14.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat May 25 00:07:02 2013] fullrun_mos2_xmm0094800201_pi300-10000_cl_pass1_tfrozen_src14.ximg exists
[Sat May 25 00:07:02 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0094800201_pi300-10000_cl_pass1_tfrozen_src14.csv
[Sat May 25 00:07:02 2013] fullrun_mos2_xmm0094800201_pi300-10000_cl_pass1_tfrozen_src14_1.ximg exists
[Sat May 25 00:07:02 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0094800201_pi300-10000_cl_pass1_tfrozen_src14.csv
[Sat May 25 00:07:02 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0094800201_pi300-10000_cl_pass1_tfrozen_src14_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0094800201_pi300-10000_cl_pass1_tfrozen_src14.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat May 25 00:07:17 2013] Source 13 is offset by -4.124587 and -1.856798 pixels which is larger than
2 X fitted extent = 0.847646 x 0.847646, not incorporating fit results
[Sat May 25 00:07:17 2013] Warning, spatial fit 14 centroid is now closest to src. 1
[Sat May 25 00:07:17 2013] Vigneting correction estimate = 1.000000
[Sat May 25 00:07:17 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat May 25 00:07:17 2013] Assessing source extent using major
[Sat May 25 00:07:17 2013] Source does appear to be extended
[Sat May 25 00:07:17 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sat May 25 01:03:34 2013] XMMSAS src. selection expression = ellipse(27500.622955, 23385.996613, 652.500000, 652.500000, 0.000000, X, Y)
[Sat May 25 01:03:34 2013] Writing source region out to fullrun_mos2_xmm0094800201_pi300-10000_pass1_cl_src13_src.reg
[Sat May 25 01:03:34 2013] Extracting stamp from image fullrun_mos2_xmm0094800201_pi300-10000_cl_sm2.00.img.gz, (279, 232) - (354, 307)
[Sat May 25 01:03:34 2013] XMMSAS bgd. selection expression = annulus(27500.622955, 23385.996613, 1087.500000, 2175.000000, X, Y) && !ellipse(26209.770600, 24781.985400, 338.597610, 338.597610, 0.000000, X, Y) && !ellipse(27285.942596, 24105.480347, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29706.469694, 22084.195400, 376.387211, 376.387211, 0.000000, X, Y) && !ellipse(27082.070862, 23496.947632, 870.000000, 870.000000, 0.000000, X, Y)
[Sat May 25 01:03:34 2013] Writing fullrun_mos2_xmm0094800201_pi300-10000_pass1_cl_src13.gif
[Sat May 25 01:09:03 2013] Mean detx,y = (-744.09, 405.59) 
[Sat May 25 01:09:05 2013] Setting backscal keywords in source and bgd. spectrum
[Sat May 25 01:09:18 2013] Binned source spectrum to 10 counts/bin
[Sat May 25 01:09:19 2013] Setting source spectrum file to fullrun_mos2_xmm0094800201_pi300-10000_pass1_cl_src13_src_b10.pi.gz
[Sat May 25 01:09:19 2013] Setting bgd. spectrum file to fullrun_mos2_xmm0094800201_pi300-10000_pass1_cl_src13_bgd.pi.gz
[Sat May 25 01:26:23 2013] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Sat May 25 01:26:23 2013] rmf not generated due to insufficient counts
[Sat May 25 01:33:06 2013] Updating aperture counts using extracted products
[Sat May 25 01:33:06 2013] Total counts from fullrun_mos2_xmm0094800201_pi300-10000_pass1_cl_src13_src_b10.pi.gz = 548.00
[Sat May 25 01:33:06 2013] Total counts from fullrun_mos2_xmm0094800201_pi300-10000_pass1_cl_src13_bgd.pi.gz = 1487.00
[Sat May 25 01:33:06 2013] Got source and background scale factors 1175824.000000, 9384752.000000
[Sat May 25 01:33:06 2013] User source parameters:
  Position = (316.7, 269.4) = 11 40 20.71 66 7 58.6
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 361.7 +/- 24.4
  Background aperture counts = 186.3
  Rate = 0.01 +/- 0.0008

[Sat May 25 01:33:06 2013] Updating counts from extracted products
[Sat May 25 01:33:06 2013] Set source signif. to 361.69/13.65 = 26.50
[Sat May 25 01:33:11 2013] Calculating source flux in energy range 0.30-8.00
[Sat May 25 01:33:11 2013] Using photon index=1.80, rate=0.012, arf fullrun_mos2_xmm0094800201_pi300-10000_pass1_cl_src13.arf
[Sat May 25 01:33:11 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Sat May 25 01:33:12 2013] Updating source flux to 1.2e-13
[Sat May 25 01:33:18 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Sat May 25 01:33:24 2013] xmm0094800201/analysis//spectral/fullrun_mos2_xmm0094800201_pi300-10000_pass1_cl_src13_pl.csv not found, spectral fit skipped or did not complete