[Sat May 25 00:05:17 2013] Detection parameters:
  Position = (227.1, 290.8) = 11 41 24.98 66 9 21.2
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 201.6 +/- 20.9
  Background counts = 95.1
  Rate = 0.005 +/- 0.0005

[Sat May 25 00:05:18 2013] Off-axis axis estimate = 5.21'
[Sat May 25 00:06:03 2013] Using EEF radius (= 9.03 ")to estimate initial spatial extent for simple fitting
[Sat May 25 00:06:03 2013] Initial guess for spatial extent in simple fitting = 9.03"
[Sat May 25 00:06:03 2013] source mask rpix=2.1, npix_max = 26, mask sum = 26, frac = 0.979
[Sat May 25 00:06:03 2013] Giving source the simple spatial ID 5 for pass 0, mean size = 9.03"
[Sat May 25 00:06:05 2013] fullrun_mos2_xmm0094800201_pi300-10000_cl_pass0_src5.ximg exists
[Sat May 25 00:06:05 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0094800201_pi300-10000_cl_pass0_src5.csv
[Sat May 25 00:06:05 2013] fullrun_mos2_xmm0094800201_pi300-10000_cl_pass0_src5_1.ximg exists
[Sat May 25 00:06:05 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0094800201_pi300-10000_cl_pass0_src5.csv
[Sat May 25 00:06:05 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0094800201_pi300-10000_cl_pass0_src5_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0094800201_pi300-10000_cl_pass0_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat May 25 00:06:08 2013] fullrun_mos2_xmm0094800201_pi300-10000_cl_pass0_tfrozen_src5.ximg exists
[Sat May 25 00:06:08 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0094800201_pi300-10000_cl_pass0_tfrozen_src5.csv
[Sat May 25 00:06:08 2013] fullrun_mos2_xmm0094800201_pi300-10000_cl_pass0_tfrozen_src5_1.ximg exists
[Sat May 25 00:06:08 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0094800201_pi300-10000_cl_pass0_tfrozen_src5.csv
[Sat May 25 00:06:08 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0094800201_pi300-10000_cl_pass0_tfrozen_src5_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0094800201_pi300-10000_cl_pass0_tfrozen_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat May 25 00:06:27 2013] Spatial fit model total counts = 1063.320000, observed total counts = 367.000000
[Sat May 25 00:06:27 2013] Poor agreement between spatial fit and data for source 10
It may help to tweak spatial fit manually
Not incorporating fit results
[Sat May 25 00:06:27 2013] Vigneting correction estimate = 1.000000
[Sat May 25 00:06:27 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat May 25 00:06:27 2013] Assessing source extent using major
[Sat May 25 00:06:27 2013] Source does appear to be extended
[Sat May 25 00:06:27 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sat May 25 00:06:55 2013] Using EEF radius (= 9.03 ")to estimate initial spatial extent for simple fitting
[Sat May 25 00:06:55 2013] Initial guess for spatial extent in simple fitting = 9.03"
[Sat May 25 00:06:55 2013] source mask rpix=2.1, npix_max = 26, mask sum = 26, frac = 0.979
[Sat May 25 00:06:55 2013] Giving source the simple spatial ID 5 for pass 1, mean size = 9.03"
[Sat May 25 00:06:57 2013] fullrun_mos2_xmm0094800201_pi300-10000_cl_pass1_src5.ximg exists
[Sat May 25 00:06:57 2013] fullrun_mos2_xmm0094800201_pi300-10000_cl_pass1_src5_1.ximg exists
[Sat May 25 00:06:57 2013] Fit fullrun_mos2_xmm0094800201_pi300-10000_cl_pass1_src5 appears to have run properly
[Sat May 25 00:07:00 2013] fullrun_mos2_xmm0094800201_pi300-10000_cl_pass1_tfrozen_src5.ximg exists
[Sat May 25 00:07:01 2013] fullrun_mos2_xmm0094800201_pi300-10000_cl_pass1_tfrozen_src5_1.ximg exists
[Sat May 25 00:07:01 2013] Fit fullrun_mos2_xmm0094800201_pi300-10000_cl_pass1_tfrozen_src5 appears to have run properly
[Sat May 25 00:07:17 2013] Spatial fit model total counts = 378.537000, observed total counts = 367.000000
[Sat May 25 00:07:17 2013] Offset between fit and detection position for source 10 = 0.320610 pixels
[Sat May 25 00:07:17 2013] 378.598000 total counts/ 261.173000 bgd. counts: snr = 7.266017
Spatial fit parameters:
  Offset between fit and detection position for source 10 = 0.320610 pixels
  Position = (227.0, 290.4) = 11 41 25.00 66 9 20.5
  Extent = 6.6 (5.6-8.1)", rotation angle = 0
  Source counts = 117.4 +/- 19.5
  Background counts = 261.2
  Rate = 0.004 +/- 0.0006
[Sat May 25 00:07:17 2013] Vigneting correction estimate = 1.000000
[Sat May 25 00:07:17 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat May 25 00:07:17 2013] Assessing source extent using major axis lower bound
[Sat May 25 00:07:17 2013] Source does appear to be extended
[Sat May 25 00:07:17 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sat May 25 01:03:31 2013] XMMSAS src. selection expression = ellipse(19702.528920, 25219.314800, 395.059811, 395.059811, 0.000000, X, Y)
[Sat May 25 01:03:31 2013] Writing source region out to fullrun_mos2_xmm0094800201_pi300-10000_pass1_cl_src10_src.reg
[Sat May 25 01:03:31 2013] Extracting stamp from image fullrun_mos2_xmm0094800201_pi300-10000_cl_sm2.00.img.gz, (204, 268) - (250, 313)
[Sat May 25 01:03:31 2013] XMMSAS bgd. selection expression = annulus(19702.528920, 25219.314800, 658.433019, 1316.866038, X, Y) && !ellipse(18744.546606, 24556.725400, 502.665614, 502.665614, 0.000000, X, Y)
[Sat May 25 01:03:31 2013] Writing fullrun_mos2_xmm0094800201_pi300-10000_pass1_cl_src10.gif
[Sat May 25 01:05:00 2013] Mean detx,y = (-989.87, -7471.95) 
[Sat May 25 01:05:01 2013] Setting backscal keywords in source and bgd. spectrum
[Sat May 25 01:05:39 2013] Binned source spectrum to 10 counts/bin
[Sat May 25 01:05:40 2013] Setting source spectrum file to fullrun_mos2_xmm0094800201_pi300-10000_pass1_cl_src10_src_b10.pi.gz
[Sat May 25 01:05:40 2013] Setting bgd. spectrum file to fullrun_mos2_xmm0094800201_pi300-10000_pass1_cl_src10_bgd.pi.gz
[Sat May 25 01:33:00 2013] Updating aperture counts using extracted products
[Sat May 25 01:33:00 2013] Total counts from fullrun_mos2_xmm0094800201_pi300-10000_pass1_cl_src10_src_b10.pi.gz = 173.00
[Sat May 25 01:33:00 2013] Total counts from fullrun_mos2_xmm0094800201_pi300-10000_pass1_cl_src10_bgd.pi.gz = 299.00
[Sat May 25 01:33:00 2013] Got source and background scale factors 442544.000000, 2561763.000000
[Sat May 25 01:33:01 2013] User source parameters:
  Position = (227.0, 290.4) = 11 41 25.00 66 9 20.5
  Extent = 6.6 (5.6-8.1)", rotation angle = 0
  Source aperture counts = 121.3 +/- 14.2
  Background aperture counts = 51.7
  Rate = 0.004 +/- 0.0005

[Sat May 25 01:33:10 2013] Calculating source flux in energy range 0.30-8.00
[Sat May 25 01:33:10 2013] Using photon index=1.80, rate=0.00388, arf fullrun_mos2_xmm0094800201_pi300-10000_pass1_cl_src10.arf
[Sat May 25 01:33:10 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Sat May 25 01:33:10 2013] Updating source flux to 5.8e-14
[Sat May 25 01:33:18 2013] Flag p found in src. 10 procflags, skipping spectral fitting
[Sat May 25 01:33:24 2013] xmm0094800201/analysis//spectral/fullrun_mos2_xmm0094800201_pi300-10000_pass1_cl_src10_pl.csv not found, spectral fit skipped or did not complete