[Sat May 25 00:05:16 2013] Detection parameters:
  Position = (314.2, 277.6) = 11 40 22.47 66 8 18.8
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 630.0 +/- 48.3
  Background counts = 102.9
  Rate = 0.01 +/- 0.001

[Sat May 25 00:05:18 2013] Off-axis axis estimate = 1.89'
[Sat May 25 00:06:03 2013] Using EEF radius (= 7.37 ")to estimate initial spatial extent for simple fitting
[Sat May 25 00:06:03 2013] Initial guess for spatial extent in simple fitting = 7.37"
[Sat May 25 00:06:03 2013] source mask rpix=1.7, npix_max = 19, mask sum = 15, frac = 0.778
[Sat May 25 00:06:03 2013] Giving source the simple spatial ID 2 for pass 0, mean size = 7.37"
[Sat May 25 00:06:04 2013] fullrun_mos2_xmm0094800201_pi300-10000_cl_pass0_src2.ximg exists
[Sat May 25 00:06:04 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0094800201_pi300-10000_cl_pass0_src2.csv
[Sat May 25 00:06:04 2013] fullrun_mos2_xmm0094800201_pi300-10000_cl_pass0_src2_1.ximg exists
[Sat May 25 00:06:04 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0094800201_pi300-10000_cl_pass0_src2.csv
[Sat May 25 00:06:04 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0094800201_pi300-10000_cl_pass0_src2_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0094800201_pi300-10000_cl_pass0_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat May 25 00:06:08 2013] fullrun_mos2_xmm0094800201_pi300-10000_cl_pass0_tfrozen_src2.ximg exists
[Sat May 25 00:06:08 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0094800201_pi300-10000_cl_pass0_tfrozen_src2.csv
[Sat May 25 00:06:08 2013] fullrun_mos2_xmm0094800201_pi300-10000_cl_pass0_tfrozen_src2_1.ximg exists
[Sat May 25 00:06:08 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0094800201_pi300-10000_cl_pass0_tfrozen_src2.csv
[Sat May 25 00:06:08 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0094800201_pi300-10000_cl_pass0_tfrozen_src2_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0094800201_pi300-10000_cl_pass0_tfrozen_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat May 25 00:06:27 2013] Spatial fit model total counts = 1206.650000, observed total counts = 1071.000000
[Sat May 25 00:06:27 2013] Poor agreement between spatial fit and data for source 1
It may help to tweak spatial fit manually
Not incorporating fit results
[Sat May 25 00:06:27 2013] Source 1 is offset by -8.866062 and 0.576901 pixels which is larger than
2 X fitted extent = 0.881880 x 0.881880, not incorporating fit results
[Sat May 25 00:06:27 2013] Vigneting correction estimate = 1.000000
[Sat May 25 00:06:27 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat May 25 00:06:27 2013] Assessing source extent using major
[Sat May 25 00:06:27 2013] Source does appear to be extended
[Sat May 25 00:06:27 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sat May 25 00:06:27 2013] Source is confused with source 12
[Sat May 25 00:06:55 2013] Using EEF radius (= 7.37 ")to estimate initial spatial extent for simple fitting
[Sat May 25 00:06:55 2013] Initial guess for spatial extent in simple fitting = 7.37"
[Sat May 25 00:06:55 2013] source mask rpix=1.7, npix_max = 19, mask sum = 15, frac = 0.778
[Sat May 25 00:06:55 2013] Giving source the simple spatial ID 2 for pass 1, mean size = 7.37"
[Sat May 25 00:06:56 2013] fullrun_mos2_xmm0094800201_pi300-10000_cl_pass1_src2.ximg exists
[Sat May 25 00:06:56 2013] fullrun_mos2_xmm0094800201_pi300-10000_cl_pass1_src2_1.ximg exists
[Sat May 25 00:06:56 2013] Fit fullrun_mos2_xmm0094800201_pi300-10000_cl_pass1_src2 appears to have run properly
[Sat May 25 00:07:00 2013] fullrun_mos2_xmm0094800201_pi300-10000_cl_pass1_tfrozen_src2.ximg exists
[Sat May 25 00:07:00 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0094800201_pi300-10000_cl_pass1_tfrozen_src2.csv
[Sat May 25 00:07:00 2013] fullrun_mos2_xmm0094800201_pi300-10000_cl_pass1_tfrozen_src2_1.ximg exists
[Sat May 25 00:07:00 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0094800201_pi300-10000_cl_pass1_tfrozen_src2.csv
[Sat May 25 00:07:00 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0094800201_pi300-10000_cl_pass1_tfrozen_src2_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0094800201_pi300-10000_cl_pass1_tfrozen_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat May 25 00:07:17 2013] Warning, spatial fit 2 centroid is now closest to src. 13
[Sat May 25 00:07:17 2013] Spatial fit model total counts = 1021.730000, observed total counts = 831.000000
[Sat May 25 00:07:17 2013] Poor agreement between spatial fit and data for source 1
It may help to tweak spatial fit manually
Not incorporating fit results
[Sat May 25 00:07:17 2013] Vigneting correction estimate = 1.000000
[Sat May 25 00:07:17 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat May 25 00:07:17 2013] Assessing source extent using major
[Sat May 25 00:07:17 2013] Source does appear to be extended
[Sat May 25 00:07:17 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sat May 25 01:03:30 2013] XMMSAS src. selection expression = ellipse(27285.942596, 24105.480347, 652.500000, 652.500000, 0.000000, X, Y)
[Sat May 25 01:03:30 2013] Writing source region out to fullrun_mos2_xmm0094800201_pi300-10000_pass1_cl_src1_src.reg
[Sat May 25 01:03:30 2013] Extracting stamp from image fullrun_mos2_xmm0094800201_pi300-10000_cl_sm2.00.img.gz, (277, 240) - (352, 315)
[Sat May 25 01:03:31 2013] XMMSAS bgd. selection expression = annulus(27285.942596, 24105.480347, 1087.500000, 2175.000000, X, Y) && !ellipse(26209.770600, 24781.985400, 338.597610, 338.597610, 0.000000, X, Y) && !ellipse(29706.469694, 22084.195400, 376.387211, 376.387211, 0.000000, X, Y) && !ellipse(27082.070862, 23496.947632, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27500.622955, 23385.996613, 870.000000, 870.000000, 0.000000, X, Y)
[Sat May 25 01:03:31 2013] Writing fullrun_mos2_xmm0094800201_pi300-10000_pass1_cl_src1.gif
[Sat May 25 01:04:08 2013] Mean detx,y = (-263.54, 146.60) 
[Sat May 25 01:04:10 2013] Setting backscal keywords in source and bgd. spectrum
[Sat May 25 01:04:21 2013] Binned source spectrum to 10 counts/bin
[Sat May 25 01:04:22 2013] Setting source spectrum file to fullrun_mos2_xmm0094800201_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Sat May 25 01:04:22 2013] Setting bgd. spectrum file to fullrun_mos2_xmm0094800201_pi300-10000_pass1_cl_src1_bgd.pi.gz
[Sat May 25 01:16:24 2013] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Sat May 25 01:16:24 2013] rmf not generated due to insufficient counts
[Sat May 25 01:32:59 2013] Updating aperture counts using extracted products
[Sat May 25 01:32:59 2013] Total counts from fullrun_mos2_xmm0094800201_pi300-10000_pass1_cl_src1_src_b10.pi.gz = 883.00
[Sat May 25 01:32:59 2013] Total counts from fullrun_mos2_xmm0094800201_pi300-10000_pass1_cl_src1_bgd.pi.gz = 1493.00
[Sat May 25 01:32:59 2013] Got source and background scale factors 1166520.000000, 9305696.000000
[Sat May 25 01:32:59 2013] User source parameters:
  Position = (314.2, 277.6) = 11 40 22.47 66 8 18.8
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 695.8 +/- 30.7
  Background aperture counts = 187.2
  Rate = 0.02 +/- 0.001

[Sat May 25 01:32:59 2013] Updating counts from extracted products
[Sat May 25 01:32:59 2013] Set source signif. to 695.84/13.68 = 50.86
[Sat May 25 01:33:10 2013] Calculating source flux in energy range 0.30-8.00
[Sat May 25 01:33:10 2013] Using photon index=1.80, rate=0.023, arf fullrun_mos2_xmm0094800201_pi300-10000_pass1_cl_src1.arf
[Sat May 25 01:33:10 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Sat May 25 01:33:10 2013] Updating source flux to 2.3e-13
[Sat May 25 01:33:18 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Sat May 25 01:33:24 2013] xmm0094800201/analysis//spectral/fullrun_mos2_xmm0094800201_pi300-10000_pass1_cl_src1_pl.csv not found, spectral fit skipped or did not complete