[Sat May 25 00:05:14 2013] Detection parameters:
  Position = (316.8, 265.0) = 11 40 20.59 66 7 26.6
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 74.4 +/- 17.8
  Background counts = 96.8
  Rate = 0.001 +/- 0.0003

[Sat May 25 00:05:15 2013] Off-axis axis estimate = 2.76'
[Sat May 25 00:05:57 2013] Using EEF radius (= 7.81 ")to estimate initial spatial extent for simple fitting
[Sat May 25 00:05:57 2013] Initial guess for spatial extent in simple fitting = 7.81"
[Sat May 25 00:05:57 2013] source mask rpix=1.8, npix_max = 21, mask sum = 16, frac = 0.759
[Sat May 25 00:05:57 2013] Giving source the simple spatial ID 15 for pass 0, mean size = 7.81"
[Sat May 25 00:06:00 2013] fullrun_mos1_xmm0094800201_pi300-10000_cl_pass0_src15.ximg exists
[Sat May 25 00:06:00 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0094800201_pi300-10000_cl_pass0_src15.csv
[Sat May 25 00:06:00 2013] fullrun_mos1_xmm0094800201_pi300-10000_cl_pass0_src15_1.ximg exists
[Sat May 25 00:06:00 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0094800201_pi300-10000_cl_pass0_src15.csv
[Sat May 25 00:06:00 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0094800201_pi300-10000_cl_pass0_src15_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0094800201_pi300-10000_cl_pass0_src15.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat May 25 00:06:03 2013] fullrun_mos1_xmm0094800201_pi300-10000_cl_pass0_tfrozen_src15.ximg exists
[Sat May 25 00:06:03 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0094800201_pi300-10000_cl_pass0_tfrozen_src15.csv
[Sat May 25 00:06:03 2013] fullrun_mos1_xmm0094800201_pi300-10000_cl_pass0_tfrozen_src15_1.ximg exists
[Sat May 25 00:06:03 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0094800201_pi300-10000_cl_pass0_tfrozen_src15.csv
[Sat May 25 00:06:03 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0094800201_pi300-10000_cl_pass0_tfrozen_src15_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0094800201_pi300-10000_cl_pass0_tfrozen_src15.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat May 25 00:06:23 2013] Warning: source 15 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 8 at 10.963588 pixels away
[Sat May 25 00:06:23 2013] Vigneting correction estimate = 1.000000
[Sat May 25 00:06:23 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat May 25 00:06:23 2013] Assessing source extent using major
[Sat May 25 00:06:23 2013] Source does appear to be extended
[Sat May 25 00:06:23 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sat May 25 00:06:49 2013] Using EEF radius (= 7.81 ")to estimate initial spatial extent for simple fitting
[Sat May 25 00:06:49 2013] Initial guess for spatial extent in simple fitting = 7.81"
[Sat May 25 00:06:49 2013] source mask rpix=1.8, npix_max = 21, mask sum = 16, frac = 0.759
[Sat May 25 00:06:49 2013] Giving source the simple spatial ID 13 for pass 1, mean size = 7.81"
[Sat May 25 00:06:52 2013] fullrun_mos1_xmm0094800201_pi300-10000_cl_pass1_src13.ximg exists
[Sat May 25 00:06:52 2013] fullrun_mos1_xmm0094800201_pi300-10000_cl_pass1_src13_1.ximg exists
[Sat May 25 00:06:52 2013] Fit fullrun_mos1_xmm0094800201_pi300-10000_cl_pass1_src13 appears to have run properly
[Sat May 25 00:06:55 2013] fullrun_mos1_xmm0094800201_pi300-10000_cl_pass1_tfrozen_src13.ximg exists
[Sat May 25 00:06:55 2013] fullrun_mos1_xmm0094800201_pi300-10000_cl_pass1_tfrozen_src13_1.ximg exists
[Sat May 25 00:06:55 2013] Fit fullrun_mos1_xmm0094800201_pi300-10000_cl_pass1_tfrozen_src13 appears to have run properly
[Sat May 25 00:07:13 2013] Warning: source 2 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 8 at 27.591854 pixels away
[Sat May 25 00:07:13 2013] Source 8 is offset by 3.307586 and -8.132103 pixels which is larger than
2 X fitted extent = 7.181931 x 7.181931, not incorporating fit results
[Sat May 25 00:07:13 2013] Vigneting correction estimate = 1.000000
[Sat May 25 00:07:13 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat May 25 00:07:13 2013] Assessing source extent using major
[Sat May 25 00:07:13 2013] Source does appear to be extended
[Sat May 25 00:07:13 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sat May 25 00:43:55 2013] XMMSAS src. selection expression = ellipse(27515.599976, 23010.833008, 652.500000, 652.500000, 0.000000, X, Y)
[Sat May 25 00:43:55 2013] Writing source region out to fullrun_mos1_xmm0094800201_pi300-10000_pass1_cl_src8_src.reg
[Sat May 25 00:43:55 2013] Extracting stamp from image fullrun_mos1_xmm0094800201_pi300-10000_cl_sm2.00.img.gz, (279, 228) - (354, 303)
[Sat May 25 00:43:55 2013] XMMSAS bgd. selection expression = annulus(27515.599976, 23010.833008, 1087.500000, 2175.000000, X, Y) && !ellipse(26204.604400, 24767.973000, 338.947210, 338.947210, 0.000000, X, Y) && !ellipse(27297.198400, 23898.726400, 1184.688034, 1184.688034, 0.000000, X, Y) && !ellipse(29718.658325, 22047.936188, 870.000000, 870.000000, 0.000000, X, Y)
[Sat May 25 00:43:55 2013] Writing fullrun_mos1_xmm0094800201_pi300-10000_pass1_cl_src8.gif
[Sat May 25 00:47:45 2013] Mean detx,y = (768.19, 963.53) 
[Sat May 25 00:47:46 2013] Setting backscal keywords in source and bgd. spectrum
[Sat May 25 00:47:59 2013] Binned source spectrum to 10 counts/bin
[Sat May 25 00:48:00 2013] Setting source spectrum file to fullrun_mos1_xmm0094800201_pi300-10000_pass1_cl_src8_src_b10.pi.gz
[Sat May 25 00:48:00 2013] Setting bgd. spectrum file to fullrun_mos1_xmm0094800201_pi300-10000_pass1_cl_src8_bgd.pi.gz
[Sat May 25 01:02:49 2013] Not generating rmf since there are only 74 counts
[Sat May 25 01:02:49 2013] rmf not generated due to insufficient counts
[Sat May 25 01:32:55 2013] Updating aperture counts using extracted products
[Sat May 25 01:32:55 2013] Total counts from fullrun_mos1_xmm0094800201_pi300-10000_pass1_cl_src8_src_b10.pi.gz = 374.00
[Sat May 25 01:32:55 2013] Total counts from fullrun_mos1_xmm0094800201_pi300-10000_pass1_cl_src8_bgd.pi.gz = 1229.00
[Sat May 25 01:32:55 2013] Got source and background scale factors 1336000.000000, 7718616.000000
[Sat May 25 01:32:55 2013] User source parameters:
  Position = (316.8, 265.0) = 11 40 20.59 66 7 26.6
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 161.3 +/- 20.4
  Background aperture counts = 212.7
  Rate = 0.005 +/- 0.0007

[Sat May 25 01:32:55 2013] Updating counts from extracted products
[Sat May 25 01:32:55 2013] Set source signif. to 161.27/14.59 = 11.06
[Sat May 25 01:32:58 2013] Calculating source flux in energy range 0.30-8.00
[Sat May 25 01:32:58 2013] Using photon index=1.80, rate=0.00526, arf fullrun_mos1_xmm0094800201_pi300-10000_pass1_cl_src8.arf
[Sat May 25 01:32:58 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Sat May 25 01:32:58 2013] Updating source flux to 5.1e-14
[Sat May 25 01:33:15 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Sat May 25 01:33:18 2013] xmm0094800201/analysis//spectral/fullrun_mos1_xmm0094800201_pi300-10000_pass1_cl_src8_pl.csv not found, spectral fit skipped or did not complete