[Sat May 25 00:05:14 2013] Detection parameters:
  Position = (315.1, 167.8) = 11 40 21.88 66 0 28.3
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 98.4 +/- 17.2
  Background counts = 85.1
  Rate = 0.003 +/- 0.0005

[Sat May 25 00:05:15 2013] Off-axis axis estimate = 9.55'
[Sat May 25 00:05:57 2013] Using EEF radius (= 11.20 ")to estimate initial spatial extent for simple fitting
[Sat May 25 00:05:57 2013] Initial guess for spatial extent in simple fitting = 11.20"
[Sat May 25 00:05:57 2013] source mask rpix=2.6, npix_max = 37, mask sum = 36, frac = 0.952
[Sat May 25 00:05:57 2013] Giving source the simple spatial ID 11 for pass 0, mean size = 11.20"
[Sat May 25 00:05:59 2013] fullrun_mos1_xmm0094800201_pi300-10000_cl_pass0_src11.ximg exists
[Sat May 25 00:05:59 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0094800201_pi300-10000_cl_pass0_src11.csv
[Sat May 25 00:05:59 2013] fullrun_mos1_xmm0094800201_pi300-10000_cl_pass0_src11_1.ximg exists
[Sat May 25 00:05:59 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0094800201_pi300-10000_cl_pass0_src11.csv
[Sat May 25 00:05:59 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0094800201_pi300-10000_cl_pass0_src11_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0094800201_pi300-10000_cl_pass0_src11.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat May 25 00:06:02 2013] fullrun_mos1_xmm0094800201_pi300-10000_cl_pass0_tfrozen_src11.ximg exists
[Sat May 25 00:06:02 2013] fullrun_mos1_xmm0094800201_pi300-10000_cl_pass0_tfrozen_src11_1.ximg exists
[Sat May 25 00:06:02 2013] Fit fullrun_mos1_xmm0094800201_pi300-10000_cl_pass0_tfrozen_src11 appears to have run properly
[Sat May 25 00:06:23 2013] Source 11 is offset by -6.540769 and 2.468259 pixels which is larger than
2 X fitted extent = 1.357586 x 1.357586, not incorporating fit results
[Sat May 25 00:06:23 2013] Spatial fit model total counts = 272.209000, observed total counts = 272.000000
[Sat May 25 00:06:23 2013] Offset between fit and detection position for source 11 = 0.059631 pixels
[Sat May 25 00:06:23 2013] 277.861900 total counts/ 245.996000 bgd. counts: snr = 2.031712
Spatial fit parameters:
  Offset between fit and detection position for source 11 = 0.059631 pixels
  Position = (315.2, 167.8) = 11 40 21.85 66 0 27.7
  Extent = 3.6 (2.8-7.5)", rotation angle = 0
  Source counts = 31.9 +/- 16.7
  Background counts = 246.0
  Rate = 0.001 +/- 0.0005
[Sat May 25 00:06:23 2013] Vigneting correction estimate = 1.000000
[Sat May 25 00:06:23 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat May 25 00:06:23 2013] Assessing source extent using major axis lower bound
[Sat May 25 00:06:23 2013] Source does appear to be extended
[Sat May 25 00:06:23 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sat May 25 00:06:49 2013] Using previous fit value to estimate initial spatial extent for simple fitting
[Sat May 25 00:06:49 2013] Initial guess for spatial extent in simple fitting = 3.60"
[Sat May 25 00:06:49 2013] source mask rpix=0.8, npix_max = 7, mask sum = 4, frac = 0.567
[Sat May 25 00:06:49 2013] Giving source the simple spatial ID 10 for pass 1, mean size = 3.60"
[Sat May 25 00:06:51 2013] fullrun_mos1_xmm0094800201_pi300-10000_cl_pass1_src10.ximg exists
[Sat May 25 00:06:52 2013] fullrun_mos1_xmm0094800201_pi300-10000_cl_pass1_src10_1.ximg exists
[Sat May 25 00:06:52 2013] Fit fullrun_mos1_xmm0094800201_pi300-10000_cl_pass1_src10 appears to have run properly
[Sat May 25 00:06:54 2013] fullrun_mos1_xmm0094800201_pi300-10000_cl_pass1_tfrozen_src10.ximg exists
[Sat May 25 00:06:54 2013] fullrun_mos1_xmm0094800201_pi300-10000_cl_pass1_tfrozen_src10_1.ximg exists
[Sat May 25 00:06:54 2013] Fit fullrun_mos1_xmm0094800201_pi300-10000_cl_pass1_tfrozen_src10 appears to have run properly
[Sat May 25 00:07:13 2013] Spatial fit model total counts = 272.293000, observed total counts = 272.000000
[Sat May 25 00:07:13 2013] Offset between fit and detection position for source 11 = 0.007640 pixels
[Sat May 25 00:07:13 2013] 277.970400 total counts/ 246.073000 bgd. counts: snr = 2.033402
Spatial fit parameters:
  Offset between fit and detection position for source 11 = 0.007640 pixels
  Position = (315.2, 167.9) = 11 40 21.84 66 0 27.7
  Extent = 3.5 (2.5-7.2)", rotation angle = 0
  Source counts = 31.9 +/- 16.7
  Background counts = 246.1
  Rate = 0.001 +/- 0.0005
[Sat May 25 00:07:13 2013] Vigneting correction estimate = 1.000000
[Sat May 25 00:07:13 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat May 25 00:07:13 2013] Assessing source extent using major axis lower bound
[Sat May 25 00:07:13 2013] Source does appear to be extended
[Sat May 25 00:07:13 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sat May 25 00:43:54 2013] XMMSAS src. selection expression = ellipse(27370.237680, 14554.630200, 212.824206, 212.824206, 0.000000, X, Y)
[Sat May 25 00:43:54 2013] Writing source region out to fullrun_mos1_xmm0094800201_pi300-10000_pass1_cl_src11_src.reg
[Sat May 25 00:43:54 2013] Extracting stamp from image fullrun_mos1_xmm0094800201_pi300-10000_cl_sm2.00.img.gz, (303, 156) - (327, 180)
[Sat May 25 00:43:54 2013] XMMSAS bgd. selection expression = annulus(27370.237680, 14554.630200, 354.707010, 709.414020, X, Y) && !ellipse(28914.609253, 13350.628387, 870.000000, 870.000000, 0.000000, X, Y)
[Sat May 25 00:43:54 2013] Writing fullrun_mos1_xmm0094800201_pi300-10000_pass1_cl_src11.gif
[Sat May 25 00:46:34 2013] Mean detx,y = (2701.96, 9329.72) 
[Sat May 25 00:46:37 2013] Setting backscal keywords in source and bgd. spectrum
[Sat May 25 00:46:48 2013] Binned source spectrum to 10 counts/bin
[Sat May 25 00:46:48 2013] Setting source spectrum file to fullrun_mos1_xmm0094800201_pi300-10000_pass1_cl_src11_src_b10.pi.gz
[Sat May 25 00:46:48 2013] Setting bgd. spectrum file to fullrun_mos1_xmm0094800201_pi300-10000_pass1_cl_src11_bgd.pi.gz
[Sat May 25 01:02:23 2013] Not generating rmf since there are only 31 counts
[Sat May 25 01:02:23 2013] rmf not generated due to insufficient counts
[Sat May 25 01:32:53 2013] Updating aperture counts using extracted products
[Sat May 25 01:32:53 2013] Total counts from fullrun_mos1_xmm0094800201_pi300-10000_pass1_cl_src11_src_b10.pi.gz = 50.00
[Sat May 25 01:32:54 2013] Total counts from fullrun_mos1_xmm0094800201_pi300-10000_pass1_cl_src11_bgd.pi.gz = 122.00
[Sat May 25 01:32:54 2013] Got source and background scale factors 147200.000000, 1185600.000000
[Sat May 25 01:32:54 2013] User source parameters:
  Position = (315.2, 167.9) = 11 40 21.84 66 0 27.7
  Extent = 3.5 (2.5-7.2)", rotation angle = 0
  Source aperture counts = 34.9 +/- 8.1
  Background aperture counts = 15.1
  Rate = 0.001 +/- 0.0003

[Sat May 25 01:32:57 2013] Calculating source flux in energy range 0.30-8.00
[Sat May 25 01:32:57 2013] Using photon index=1.80, rate=0.00104, arf fullrun_mos1_xmm0094800201_pi300-10000_pass1_cl_src11.arf
[Sat May 25 01:32:57 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Sat May 25 01:32:58 2013] Updating source flux to 2e-14
[Sat May 25 01:33:15 2013] Flag b found in src. 11 procflags, skipping spectral fitting
[Sat May 25 01:33:15 2013] Source 11 has fewer than 100.000000 counts, skipping spectral fitting
[Sat May 25 01:33:18 2013] xmm0094800201/analysis//spectral/fullrun_mos1_xmm0094800201_pi300-10000_pass1_cl_src11_pl.csv not found, spectral fit skipped or did not complete