[Fri Aug 24 12:26:11 2012] Detection parameters:
  Position = (359.0, 277.1) = 10 56 43.23 -3 40 42.8
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 253.5 +/- 20.5
  Background counts = 29.9
  Rate = 0.009 +/- 0.0007

[Fri Aug 24 12:26:12 2012] Off-axis axis estimate = 4.65'
[Fri Aug 24 13:42:02 2012] Using EEF radius (= 8.76 ")to estimate initial spatial extent for simple fitting
[Fri Aug 24 13:42:02 2012] Initial guess for spatial extent in simple fitting = 8.76"
[Fri Aug 24 13:42:02 2012] source mask rpix=2.0, npix_max = 25, mask sum = 22, frac = 0.871
[Fri Aug 24 13:42:02 2012] Giving source the simple spatial ID 3 for pass 0, mean size = 8.76"
[Fri Aug 24 14:27:05 2012] fullrun_mos1_xmm0094800101_pi300-10000_cl_pass0_src3.ximg exists
[Fri Aug 24 14:27:05 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0094800101_pi300-10000_cl_pass0_src3.csv
[Fri Aug 24 14:27:05 2012] fullrun_mos1_xmm0094800101_pi300-10000_cl_pass0_src3_1.ximg exists
[Fri Aug 24 14:27:05 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0094800101_pi300-10000_cl_pass0_src3.csv
[Fri Aug 24 14:27:05 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0094800101_pi300-10000_cl_pass0_src3_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0094800101_pi300-10000_cl_pass0_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Aug 24 14:27:05 2012] fullrun_mos1_xmm0094800101_pi300-10000_cl_pass0_tfrozen_src3.ximg exists
[Fri Aug 24 14:27:05 2012] fullrun_mos1_xmm0094800101_pi300-10000_cl_pass0_tfrozen_src3_1.ximg exists
[Fri Aug 24 14:27:05 2012] Fit fullrun_mos1_xmm0094800101_pi300-10000_cl_pass0_tfrozen_src3 appears to have run properly
[Fri Aug 24 15:12:50 2012] Spatial fit model total counts = 394.703000, observed total counts = 397.000000
[Fri Aug 24 15:12:50 2012] Offset between fit and detection position for source 8 = 0.402518 pixels
[Fri Aug 24 15:12:50 2012] 390.386000 total counts/ 250.657000 bgd. counts: snr = 8.825649
Spatial fit parameters:
  Offset between fit and detection position for source 8 = 0.402518 pixels
  Position = (358.7, 276.8) = 10 56 43.30 -3 40 41.9
  Extent = 4.0 (3.3-4.6)", rotation angle = 0
  Source counts = 139.7 +/- 19.8
  Background counts = 250.7
  Rate = 0.004 +/- 0.0006
[Fri Aug 24 15:12:50 2012] Vigneting correction estimate = 1.000000
[Fri Aug 24 15:12:50 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Aug 24 15:12:50 2012] Assessing source extent using major axis lower bound
[Fri Aug 24 15:12:50 2012] Source does appear to be extended
[Fri Aug 24 15:12:50 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Aug 24 16:29:40 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri Aug 24 16:29:40 2012] Initial guess for spatial extent in simple fitting = 3.99"
[Fri Aug 24 16:29:40 2012] source mask rpix=0.9, npix_max = 8, mask sum = 7, frac = 0.871
[Fri Aug 24 16:29:40 2012] Giving source the simple spatial ID 3 for pass 1, mean size = 3.99"
[Fri Aug 24 17:09:13 2012] fullrun_mos1_xmm0094800101_pi300-10000_cl_pass1_src3.ximg exists
[Fri Aug 24 17:09:13 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0094800101_pi300-10000_cl_pass1_src3.csv
[Fri Aug 24 17:09:13 2012] fullrun_mos1_xmm0094800101_pi300-10000_cl_pass1_src3_1.ximg exists
[Fri Aug 24 17:09:13 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0094800101_pi300-10000_cl_pass1_src3.csv
[Fri Aug 24 17:09:13 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0094800101_pi300-10000_cl_pass1_src3_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0094800101_pi300-10000_cl_pass1_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Aug 24 17:09:13 2012] fullrun_mos1_xmm0094800101_pi300-10000_cl_pass1_tfrozen_src3.ximg exists
[Fri Aug 24 17:09:13 2012] fullrun_mos1_xmm0094800101_pi300-10000_cl_pass1_tfrozen_src3_1.ximg exists
[Fri Aug 24 17:09:13 2012] Fit fullrun_mos1_xmm0094800101_pi300-10000_cl_pass1_tfrozen_src3 appears to have run properly
[Fri Aug 24 17:49:19 2012] Spatial fit model total counts = 395.723000, observed total counts = 400.000000
[Fri Aug 24 17:49:19 2012] Offset between fit and detection position for source 8 = 0.003997 pixels
[Fri Aug 24 17:49:19 2012] 392.922000 total counts/ 252.926000 bgd. counts: snr = 8.802761
Spatial fit parameters:
  Offset between fit and detection position for source 8 = 0.003997 pixels
  Position = (358.7, 276.8) = 10 56 43.31 -3 40 41.9
  Extent = 4.0 (3.3-4.6)", rotation angle = 0
  Source counts = 140.0 +/- 19.8
  Background counts = 252.9
  Rate = 0.004 +/- 0.0006
[Fri Aug 24 17:49:19 2012] Vigneting correction estimate = 1.000000
[Fri Aug 24 17:49:19 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Aug 24 17:49:19 2012] Assessing source extent using major axis lower bound
[Fri Aug 24 17:49:19 2012] Source does appear to be extended
[Fri Aug 24 17:49:19 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Aug 24 18:15:54 2012] XMMSAS src. selection expression = ellipse(31162.023600, 24034.002800, 239.243407, 239.243407, 0.000000, X, Y)
[Fri Aug 24 18:15:54 2012] Writing source region out to fullrun_mos1_xmm0094800101_pi300-10000_pass1_cl_src8_src.reg
[Fri Aug 24 18:15:54 2012] Extracting stamp from image fullrun_mos1_xmm0094800101_pi300-10000_cl_sm2.00.img.gz, (345, 263) - (372, 291)
[Fri Aug 24 18:15:54 2012] XMMSAS bgd. selection expression = annulus(31162.023600, 24034.002800, 398.739011, 797.478023, X, Y) && !ellipse(30239.991600, 24398.939200, 248.233607, 248.233607, 0.000000, X, Y)
[Fri Aug 24 18:15:54 2012] Writing fullrun_mos1_xmm0094800101_pi300-10000_pass1_cl_src8.gif
[Fri Aug 24 18:16:35 2012] Mean detx,y = (-5456.96, 2463.68) 
[Fri Aug 24 18:16:36 2012] Setting backscal keywords in source and bgd. spectrum
[Fri Aug 24 18:16:45 2012] grppha failed
[Fri Aug 24 18:16:45 2012] Setting source spectrum file to fullrun_mos1_xmm0094800101_pi300-10000_pass1_cl_src8_src.pi.gz
[Fri Aug 24 18:16:45 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0094800101_pi300-10000_pass1_cl_src8_bgd.pi.gz
[Fri Aug 24 18:44:10 2012] Updating aperture counts using extracted products
[Fri Aug 24 18:44:10 2012] Error reading totcts from fullrun_mos1_xmm0094800101_pi300-10000_pass1_cl_src8_src.pi.gz
[Fri Aug 24 18:44:11 2012] No arf file for this source, not re-computing flux
[Fri Aug 24 18:44:13 2012] Source 8 has no response, skipping
[Fri Aug 24 18:44:14 2012] xmm0094800101/analysis//spectral/fullrun_mos1_xmm0094800101_pi300-10000_pass1_cl_src8_pl.csv not found, spectral fit skipped or did not complete