[Fri Aug 24 12:26:12 2012] Detection parameters:
  Position = (255.5, 202.4) = 10 57 13.32 -3 46 4.7
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 48.1 +/- 11.1
  Background counts = 27.1
  Rate = 0.001 +/- 0.0003

[Fri Aug 24 12:26:12 2012] Off-axis axis estimate = 7.63'
[Fri Aug 24 13:42:02 2012] Using EEF radius (= 10.24 ")to estimate initial spatial extent for simple fitting
[Fri Aug 24 13:42:02 2012] Initial guess for spatial extent in simple fitting = 10.24"
[Fri Aug 24 13:42:02 2012] source mask rpix=2.4, npix_max = 32, mask sum = 25, frac = 0.767
[Fri Aug 24 13:42:02 2012] Giving source the simple spatial ID 31 for pass 0, mean size = 10.24"
[Fri Aug 24 14:27:05 2012] fullrun_mos1_xmm0094800101_pi300-10000_cl_pass0_src31.ximg exists
[Fri Aug 24 14:27:05 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0094800101_pi300-10000_cl_pass0_src31.csv
[Fri Aug 24 14:27:05 2012] fullrun_mos1_xmm0094800101_pi300-10000_cl_pass0_src31_1.ximg exists
[Fri Aug 24 14:27:05 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0094800101_pi300-10000_cl_pass0_src31.csv
[Fri Aug 24 14:27:05 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0094800101_pi300-10000_cl_pass0_src31_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0094800101_pi300-10000_cl_pass0_src31.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Aug 24 14:27:06 2012] fullrun_mos1_xmm0094800101_pi300-10000_cl_pass0_tfrozen_src31.ximg exists
[Fri Aug 24 14:27:06 2012] fullrun_mos1_xmm0094800101_pi300-10000_cl_pass0_tfrozen_src31_1.ximg exists
[Fri Aug 24 14:27:06 2012] Fit fullrun_mos1_xmm0094800101_pi300-10000_cl_pass0_tfrozen_src31 appears to have run properly
[Fri Aug 24 15:12:50 2012] Spatial fit model total counts = 251.915000, observed total counts = 252.000000
[Fri Aug 24 15:12:50 2012] Offset between fit and detection position for source 30 = 0.173469 pixels
[Fri Aug 24 15:12:50 2012] 253.170700 total counts/ 235.833000 bgd. counts: snr = 1.128988
Spatial fit parameters:
  Offset between fit and detection position for source 30 = 0.173469 pixels
  Position = (255.3, 202.5) = 10 57 13.36 -3 46 5.1
  Extent = 3.0 (2.6-6.1)", rotation angle = 0
  Source counts = 17.3 +/- 15.9
  Background counts = 235.8
  Rate = 0.0005 +/- 0.0004
  Deleting source due to low Poisson probability