[Fri Aug 24 12:26:11 2012] Detection parameters:
  Position = (444.7, 350.7) = 10 56 18.34 -3 35 21.6
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 101.7 +/- 14.2
  Background counts = 28.9
  Rate = 0.005 +/- 0.0007

[Fri Aug 24 12:26:12 2012] Off-axis axis estimate = 11.26'
[Fri Aug 24 13:42:02 2012] Using EEF radius (= 12.06 ")to estimate initial spatial extent for simple fitting
[Fri Aug 24 13:42:02 2012] Initial guess for spatial extent in simple fitting = 12.06"
[Fri Aug 24 13:42:02 2012] source mask rpix=2.8, npix_max = 42, mask sum = 46, frac = 1.074
[Fri Aug 24 13:42:02 2012] Giving source the simple spatial ID 8 for pass 0, mean size = 12.06"
[Fri Aug 24 14:27:05 2012] fullrun_mos1_xmm0094800101_pi300-10000_cl_pass0_src8.ximg exists
[Fri Aug 24 14:27:05 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0094800101_pi300-10000_cl_pass0_src8.csv
[Fri Aug 24 14:27:05 2012] fullrun_mos1_xmm0094800101_pi300-10000_cl_pass0_src8_1.ximg exists
[Fri Aug 24 14:27:05 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0094800101_pi300-10000_cl_pass0_src8.csv
[Fri Aug 24 14:27:05 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0094800101_pi300-10000_cl_pass0_src8_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0094800101_pi300-10000_cl_pass0_src8.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Aug 24 14:27:05 2012] fullrun_mos1_xmm0094800101_pi300-10000_cl_pass0_tfrozen_src8.ximg exists
[Fri Aug 24 14:27:05 2012] fullrun_mos1_xmm0094800101_pi300-10000_cl_pass0_tfrozen_src8_1.ximg exists
[Fri Aug 24 14:27:05 2012] Fit fullrun_mos1_xmm0094800101_pi300-10000_cl_pass0_tfrozen_src8 appears to have run properly
[Fri Aug 24 15:12:50 2012] Warning: source 8 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 2 at 16.114760 pixels away
[Fri Aug 24 15:12:50 2012] Vigneting correction estimate = 1.000000
[Fri Aug 24 15:12:50 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Aug 24 15:12:50 2012] Assessing source extent using major
[Fri Aug 24 15:12:50 2012] Source does appear to be extended
[Fri Aug 24 15:12:50 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Aug 24 16:29:40 2012] Using EEF radius (= 12.06 ")to estimate initial spatial extent for simple fitting
[Fri Aug 24 16:29:40 2012] Initial guess for spatial extent in simple fitting = 12.06"
[Fri Aug 24 16:29:40 2012] source mask rpix=2.8, npix_max = 42, mask sum = 46, frac = 1.074
[Fri Aug 24 16:29:40 2012] Giving source the simple spatial ID 7 for pass 1, mean size = 12.06"
[Fri Aug 24 17:09:13 2012] fullrun_mos1_xmm0094800101_pi300-10000_cl_pass1_src7.ximg exists
[Fri Aug 24 17:09:13 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0094800101_pi300-10000_cl_pass1_src7.csv
[Fri Aug 24 17:09:13 2012] fullrun_mos1_xmm0094800101_pi300-10000_cl_pass1_src7_1.ximg exists
[Fri Aug 24 17:09:13 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0094800101_pi300-10000_cl_pass1_src7.csv
[Fri Aug 24 17:09:13 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0094800101_pi300-10000_cl_pass1_src7_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0094800101_pi300-10000_cl_pass1_src7.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Aug 24 17:09:13 2012] fullrun_mos1_xmm0094800101_pi300-10000_cl_pass1_tfrozen_src7.ximg exists
[Fri Aug 24 17:09:13 2012] fullrun_mos1_xmm0094800101_pi300-10000_cl_pass1_tfrozen_src7_1.ximg exists
[Fri Aug 24 17:09:13 2012] Fit fullrun_mos1_xmm0094800101_pi300-10000_cl_pass1_tfrozen_src7 appears to have run properly
[Fri Aug 24 17:49:19 2012] Warning: source 1 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 2 at 14.092193 pixels away
[Fri Aug 24 17:49:19 2012] Spatial fit model total counts = 281.575000, observed total counts = 269.000000
[Fri Aug 24 17:49:19 2012] Offset between fit and detection position for source 2 = 0.388485 pixels
[Fri Aug 24 17:49:19 2012] 275.187200 total counts/ 214.116000 bgd. counts: snr = 4.173610
Spatial fit parameters:
  Offset between fit and detection position for source 2 = 0.388485 pixels
  Position = (444.3, 350.6) = 10 56 18.44 -3 35 21.0
  Extent = 5.1 (3.6-6.9)", rotation angle = 0
  Source counts = 61.1 +/- 16.6
  Background counts = 214.1
  Rate = 0.002 +/- 0.0005
[Fri Aug 24 17:49:19 2012] Vigneting correction estimate = 1.000000
[Fri Aug 24 17:49:19 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Aug 24 17:49:19 2012] Assessing source extent using major axis lower bound
[Fri Aug 24 17:49:19 2012] Source does appear to be extended
[Fri Aug 24 17:49:19 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Aug 24 18:15:54 2012] XMMSAS src. selection expression = ellipse(38607.372060, 30450.179800, 303.439809, 303.439809, 0.000000, X, Y)
[Fri Aug 24 18:15:54 2012] Writing source region out to fullrun_mos1_xmm0094800101_pi300-10000_pass1_cl_src2_src.reg
[Fri Aug 24 18:15:54 2012] Extracting stamp from image fullrun_mos1_xmm0094800101_pi300-10000_cl_sm2.00.img.gz, (427, 333) - (462, 368)
[Fri Aug 24 18:15:54 2012] XMMSAS bgd. selection expression = annulus(38607.372060, 30450.179800, 505.733015, 1011.466029, X, Y) && !ellipse(36918.118073, 30397.400635, 870.000000, 870.000000, 0.000000, X, Y)
[Fri Aug 24 18:15:54 2012] Writing fullrun_mos1_xmm0094800101_pi300-10000_pass1_cl_src2.gif
[Fri Aug 24 18:17:30 2012] Mean detx,y = (-3082.01, 12010.02) 
[Fri Aug 24 18:17:31 2012] Setting backscal keywords in source and bgd. spectrum
[Fri Aug 24 18:17:41 2012] grppha failed
[Fri Aug 24 18:17:41 2012] Setting source spectrum file to fullrun_mos1_xmm0094800101_pi300-10000_pass1_cl_src2_src.pi.gz
[Fri Aug 24 18:17:41 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0094800101_pi300-10000_pass1_cl_src2_bgd.pi.gz
[Fri Aug 24 18:25:07 2012] Not generating rmf since there are only 61 counts
[Fri Aug 24 18:25:07 2012] rmf not generated due to insufficient counts
[Fri Aug 24 18:44:11 2012] Updating aperture counts using extracted products
[Fri Aug 24 18:44:11 2012] Error reading totcts from fullrun_mos1_xmm0094800101_pi300-10000_pass1_cl_src2_src.pi.gz
[Fri Aug 24 18:44:11 2012] No arf file for this source, not re-computing flux
[Fri Aug 24 18:44:13 2012] Source 2 has fewer than 100.000000 counts, skipping spectral fitting
[Fri Aug 24 18:44:14 2012] xmm0094800101/analysis//spectral/fullrun_mos1_xmm0094800101_pi300-10000_pass1_cl_src2_pl.csv not found, spectral fit skipped or did not complete