[Sun Jul  8 14:29:08 2012] Detection parameters:
  Position = (287.8, 317.8) = 14 21 29.85 47 47 23.6
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 15213.9 +/- 146.3
  Background counts = 23.6
  Rate = 1 +/- 0.01

[Sun Jul  8 14:29:08 2012] Off-axis axis estimate = 1.60'
[Sun Jul  8 15:06:22 2012] Using EEF radius (= 7.23 ")to estimate initial spatial extent for simple fitting
[Sun Jul  8 15:06:22 2012] Initial guess for spatial extent in simple fitting = 7.23"
[Sun Jul  8 15:06:22 2012] source mask rpix=1.7, npix_max = 18, mask sum = 16, frac = 0.856
[Sun Jul  8 15:06:22 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 7.23"
[Sun Jul  8 15:13:22 2012] fullrun_mos1_xmm0094740201_pi300-10000_cl_pass0_src1.ximg exists
[Sun Jul  8 15:13:22 2012] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0094740201_pi300-10000_cl_pass0_src1.csv
[Sun Jul  8 15:13:22 2012] fullrun_mos1_xmm0094740201_pi300-10000_cl_pass0_src1_1.ximg exists
[Sun Jul  8 15:13:22 2012] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0094740201_pi300-10000_cl_pass0_src1.csv
[Sun Jul  8 15:13:22 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0094740201_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0094740201_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jul  8 15:13:22 2012] fullrun_mos1_xmm0094740201_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Sun Jul  8 15:13:22 2012] fullrun_mos1_xmm0094740201_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Sun Jul  8 15:13:22 2012] Fit fullrun_mos1_xmm0094740201_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Sun Jul  8 15:21:10 2012] Spatial fit model total counts = 12326.300000, observed total counts = 12254.000000
[Sun Jul  8 15:21:10 2012] Offset between fit and detection position for source 2 = 0.140536 pixels
[Sun Jul  8 15:21:10 2012] 12277.060000 total counts/ 2782.060000 bgd. counts: snr = 180.016255
Spatial fit parameters:
  Offset between fit and detection position for source 2 = 0.140536 pixels
  Position = (287.8, 317.7) = 14 21 29.86 47 47 22.9
  Extent = 5.4 (5.3-5.5)", rotation angle = 0
  Source counts = 9495.0 +/- 110.8
  Background counts = 2782.1
  Rate = 0.9 +/- 0.01
[Sun Jul  8 15:21:10 2012] Vigneting correction estimate = 1.000000
[Sun Jul  8 15:21:10 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Jul  8 15:21:10 2012] Assessing source extent using major axis lower bound
[Sun Jul  8 15:21:10 2012] Source does appear to be extended
[Sun Jul  8 15:21:10 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Jul  8 15:22:20 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Sun Jul  8 15:22:20 2012] Initial guess for spatial extent in simple fitting = 5.44"
[Sun Jul  8 15:22:20 2012] source mask rpix=1.3, npix_max = 12, mask sum = 12, frac = 0.979
[Sun Jul  8 15:22:20 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 5.44"
[Sun Jul  8 15:25:29 2012] fullrun_mos1_xmm0094740201_pi300-10000_cl_pass1_src1.ximg exists
[Sun Jul  8 15:25:29 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0094740201_pi300-10000_cl_pass1_src1.csv
[Sun Jul  8 15:25:29 2012] fullrun_mos1_xmm0094740201_pi300-10000_cl_pass1_src1_1.ximg exists
[Sun Jul  8 15:25:29 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0094740201_pi300-10000_cl_pass1_src1.csv
[Sun Jul  8 15:25:29 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0094740201_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0094740201_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jul  8 15:25:29 2012] fullrun_mos1_xmm0094740201_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Sun Jul  8 15:25:29 2012] fullrun_mos1_xmm0094740201_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Sun Jul  8 15:25:29 2012] Fit fullrun_mos1_xmm0094740201_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Sun Jul  8 15:30:16 2012] Spatial fit model total counts = 12319.600000, observed total counts = 12195.000000
[Sun Jul  8 15:30:16 2012] Offset between fit and detection position for source 2 = 0.015811 pixels
[Sun Jul  8 15:30:16 2012] 12349.820000 total counts/ 2890.500000 bgd. counts: snr = 175.943582
Spatial fit parameters:
  Offset between fit and detection position for source 2 = 0.015811 pixels
  Position = (287.8, 317.6) = 14 21 29.86 47 47 22.9
  Extent = 5.4 (5.3-5.5)", rotation angle = 0
  Source counts = 9459.3 +/- 111.1
  Background counts = 2890.5
  Rate = 0.9 +/- 0.01
[Sun Jul  8 15:30:16 2012] Vigneting correction estimate = 1.000000
[Sun Jul  8 15:30:16 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Jul  8 15:30:16 2012] Assessing source extent using major axis lower bound
[Sun Jul  8 15:30:16 2012] Source does appear to be extended
[Sun Jul  8 15:30:16 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Jul  8 15:34:55 2012] Counts = 9459.320000, rescaling region sizes by 2.000000
[Sun Jul  8 15:34:55 2012] XMMSAS src. selection expression = ellipse(24989.573400, 27586.862800, 649.954819, 649.954819, 0.000000, X, Y)
[Sun Jul  8 15:34:55 2012] Writing source region out to fullrun_mos1_xmm0094740201_pi300-10000_pass1_cl_src2_src.reg
[Sun Jul  8 15:34:55 2012] Extracting stamp from image fullrun_mos1_xmm0094740201_pi300-10000_cl_sm2.00.img.gz, (250, 280) - (325, 355)
[Sun Jul  8 15:34:55 2012] XMMSAS bgd. selection expression = annulus(24989.573400, 27586.862800, 2166.516062, 4333.032125, X, Y)
[Sun Jul  8 15:34:55 2012] Writing fullrun_mos1_xmm0094740201_pi300-10000_pass1_cl_src2.gif
[Sun Jul  8 15:34:57 2012] Mean detx,y = (187.29, -313.60) 
[Sun Jul  8 15:34:58 2012] Setting backscal keywords in source and bgd. spectrum
[Sun Jul  8 15:35:20 2012] Binned source spectrum to 10 counts/bin
[Sun Jul  8 15:35:20 2012] Setting source spectrum file to fullrun_mos1_xmm0094740201_pi300-10000_pass1_cl_src2_src_b10.pi.gz
[Sun Jul  8 15:35:20 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0094740201_pi300-10000_pass1_cl_src2_bgd.pi.gz
[Sun Jul  8 15:49:18 2012] Updating aperture counts using extracted products
[Sun Jul  8 15:49:18 2012] Error reading totcts from fullrun_mos1_xmm0094740201_pi300-10000_pass1_cl_src2_src_b10.pi.gz
[Sun Jul  8 15:49:18 2012] Calculating source flux in energy range 0.30-8.00
[Sun Jul  8 15:49:18 2012] Using photon index=1.80, rate=0.886, arf fullrun_mos1_xmm0094740201_pi300-10000_pass1_cl_src2.arf
[Sun Jul  8 15:49:18 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sun Jul  8 15:49:18 2012] Updating source flux to 8.5e-12
[Sun Jul  8 15:49:34 2012] Reading fit data from xmm0094740201/analysis//spectral/fullrun_mos1_xmm0094740201_pi300-10000_pass1_cl_src2_pl.csv
[Sun Jul  8 15:49:34 2012] Spectral fit parameter nH value = 3.00059e+19
[Sun Jul  8 15:49:34 2012] Spectral fit parameter PhoIndex value = 1.71526
[Sun Jul  8 15:49:34 2012] Failed to get F(0.3-8.0) from xmm0094740201/analysis//spectral/fullrun_mos1_xmm0094740201_pi300-10000_pass1_cl_src2_pl.csv, possibly due to different flux energy range selected
[Sun Jul  8 15:49:34 2012] Calculating source flux in energy range 0.30-8.00
[Sun Jul  8 15:49:34 2012] Using Nh = 3e+19, photon index=1.72, rate=0.886, arf fullrun_mos1_xmm0094740201_pi300-10000_pass1_cl_src2.arf
[Sun Jul  8 15:49:34 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sun Jul  8 15:49:34 2012] Updating source flux to 8.8e-12