[Fri Aug 17 23:00:20 2012] Detection parameters:
  Position = (388.5, 397.3) = 8 33 56.31 -45 40 5.8
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 1025.7 +/- 40.5
  Background counts = 207.2
  Rate = 0.05 +/- 0.002

[Fri Aug 17 23:00:21 2012] Off-axis axis estimate = 9.70'
[Fri Aug 17 23:03:56 2012] Using EEF radius (= 11.28 ")to estimate initial spatial extent for simple fitting
[Fri Aug 17 23:03:56 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Fri Aug 17 23:03:56 2012] Initial guess for spatial extent in simple fitting = 11.28"
[Fri Aug 17 23:03:56 2012] source mask rpix=2.6, npix_max = 38, mask sum = 22, frac = 0.575
[Fri Aug 17 23:03:56 2012] Giving source the simple spatial ID 6 for pass 0, mean size = 11.28"
[Sat Aug 18 01:15:55 2012] fullrun_pn_xmm0094630101_pi300-10000_cl_pass0_src6.ximg exists
[Sat Aug 18 01:15:55 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0094630101_pi300-10000_cl_pass0_src6.csv
[Sat Aug 18 01:15:55 2012] fullrun_pn_xmm0094630101_pi300-10000_cl_pass0_src6_1.ximg exists
[Sat Aug 18 01:15:55 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0094630101_pi300-10000_cl_pass0_src6.csv
[Sat Aug 18 01:15:55 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0094630101_pi300-10000_cl_pass0_src6_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0094630101_pi300-10000_cl_pass0_src6.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Aug 18 01:15:56 2012] fullrun_pn_xmm0094630101_pi300-10000_cl_pass0_tfrozen_src6.ximg exists
[Sat Aug 18 01:15:56 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0094630101_pi300-10000_cl_pass0_tfrozen_src6.csv
[Sat Aug 18 01:15:56 2012] fullrun_pn_xmm0094630101_pi300-10000_cl_pass0_tfrozen_src6_1.ximg exists
[Sat Aug 18 01:15:56 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0094630101_pi300-10000_cl_pass0_tfrozen_src6.csv
[Sat Aug 18 01:15:56 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0094630101_pi300-10000_cl_pass0_tfrozen_src6_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0094630101_pi300-10000_cl_pass0_tfrozen_src6.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Aug 18 01:33:43 2012] Warning: source 6 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 9 at 15.464387 pixels away
[Sat Aug 18 01:33:43 2012] Vigneting correction estimate = 1.000000
[Sat Aug 18 01:33:43 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Aug 18 01:33:43 2012] Assessing source extent using major
[Sat Aug 18 01:33:43 2012] Source does appear to be extended
[Sat Aug 18 01:33:43 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Aug 18 01:33:55 2012] Using EEF radius (= 11.28 ")to estimate initial spatial extent for simple fitting
[Sat Aug 18 01:33:55 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Sat Aug 18 01:33:55 2012] Initial guess for spatial extent in simple fitting = 11.28"
[Sat Aug 18 01:33:55 2012] source mask rpix=2.6, npix_max = 38, mask sum = 22, frac = 0.575
[Sat Aug 18 01:33:55 2012] Giving source the simple spatial ID 6 for pass 1, mean size = 11.28"
[Sat Aug 18 03:11:20 2012] fullrun_pn_xmm0094630101_pi300-10000_cl_pass1_src6.ximg exists
[Sat Aug 18 03:11:20 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0094630101_pi300-10000_cl_pass1_src6.csv
[Sat Aug 18 03:11:20 2012] fullrun_pn_xmm0094630101_pi300-10000_cl_pass1_src6_1.ximg exists
[Sat Aug 18 03:11:20 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0094630101_pi300-10000_cl_pass1_src6.csv
[Sat Aug 18 03:11:20 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0094630101_pi300-10000_cl_pass1_src6_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0094630101_pi300-10000_cl_pass1_src6.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Aug 18 03:11:21 2012] fullrun_pn_xmm0094630101_pi300-10000_cl_pass1_tfrozen_src6.ximg exists
[Sat Aug 18 03:11:21 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0094630101_pi300-10000_cl_pass1_tfrozen_src6.csv
[Sat Aug 18 03:11:21 2012] fullrun_pn_xmm0094630101_pi300-10000_cl_pass1_tfrozen_src6_1.ximg exists
[Sat Aug 18 03:11:21 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0094630101_pi300-10000_cl_pass1_tfrozen_src6.csv
[Sat Aug 18 03:11:21 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0094630101_pi300-10000_cl_pass1_tfrozen_src6_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0094630101_pi300-10000_cl_pass1_tfrozen_src6.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Aug 18 03:29:28 2012] Warning: source 6 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 9 at 13.864980 pixels away
[Sat Aug 18 03:29:28 2012] Vigneting correction estimate = 1.000000
[Sat Aug 18 03:29:28 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Aug 18 03:29:28 2012] Assessing source extent using major
[Sat Aug 18 03:29:28 2012] Source does appear to be extended
[Sat Aug 18 03:29:28 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Aug 18 03:29:40 2012] Counts = 1025.689697, rescaling region sizes by 2.000000
[Sat Aug 18 03:29:40 2012] XMMSAS src. selection expression = ellipse(33747.381195, 34518.983154, 1305.000000, 1305.000000, 0.000000, X, Y)
[Sat Aug 18 03:29:40 2012] Writing source region out to fullrun_pn_xmm0094630101_pi300-10000_pass1_cl_src9_src.reg
[Sat Aug 18 03:29:40 2012] Extracting stamp from image fullrun_pn_xmm0094630101_pi300-10000_cl_sm2.00.img.gz, (313, 322) - (463, 472)
[Sat Aug 18 03:29:40 2012] XMMSAS bgd. selection expression = annulus(33747.381195, 34518.983154, 4350.000000, 8700.000000, X, Y) && !ellipse(26763.199188, 29881.586853, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26350.413818, 31413.968872, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26675.662872, 29125.232727, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25739.794250, 34157.803589, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27129.866699, 29451.644684, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(40073.089386, 27191.625336, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23985.824800, 36879.427400, 1767.824051, 1767.824051, 0.000000, X, Y) && !ellipse(24320.561615, 36056.736298, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26290.542908, 34224.633331, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24645.032260, 33807.398000, 1531.768044, 1531.768044, 0.000000, X, Y) && !ellipse(25568.377594, 33195.262543, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26344.296631, 32773.943909, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25452.014000, 32262.397200, 1444.904042, 1444.904042, 0.000000, X, Y) && !ellipse(27068.347015, 31263.367645, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25425.260895, 31199.867310, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32620.992981, 31225.788361, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26352.349335, 30932.293457, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27141.925842, 30578.816132, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26527.403381, 30193.228882, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28198.054016, 30045.513672, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25045.800000, 29851.896000, 1271.272037, 1271.272037, 0.000000, X, Y) && !ellipse(26616.511475, 29791.143280, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28382.257294, 29517.242493, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25596.605865, 29541.971436, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28401.293854, 28565.749023, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27835.663757, 28491.325897, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26720.198334, 28223.356445, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27347.863190, 27803.442322, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28045.105743, 27705.556702, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27211.041565, 28234.130554, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27706.868286, 27144.551666, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29356.809692, 27023.503571, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24528.960175, 25622.882690, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30143.258575, 25490.548065, 870.000000, 870.000000, 0.000000, X, Y)
[Sat Aug 18 03:29:40 2012] Writing fullrun_pn_xmm0094630101_pi300-10000_pass1_cl_src9.gif
[Sat Aug 18 03:38:16 2012] Mean detx,y = (8355.66, -5252.17) 
[Sat Aug 18 03:38:21 2012] Setting backscal keywords in source and bgd. spectrum
[Sat Aug 18 03:40:53 2012] Binned source spectrum to 10 counts/bin
[Sat Aug 18 03:40:53 2012] Setting source spectrum file to fullrun_pn_xmm0094630101_pi300-10000_pass1_cl_src9_src_b10.pi.gz
[Sat Aug 18 03:40:53 2012] Setting bgd. spectrum file to fullrun_pn_xmm0094630101_pi300-10000_pass1_cl_src9_bgd.pi.gz
[Sat Aug 18 04:19:09 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Sat Aug 18 04:19:09 2012] rmf not generated due to insufficient counts
[Sat Aug 18 05:08:12 2012] Updating aperture counts using extracted products
[Sat Aug 18 05:08:12 2012] Error reading totcts from fullrun_pn_xmm0094630101_pi300-10000_pass1_cl_src9_src_b10.pi.gz
[Sat Aug 18 05:08:13 2012] Calculating source flux in energy range 0.30-8.00
[Sat Aug 18 05:08:13 2012] Using photon index=1.80, rate=0.0514, arf fullrun_pn_xmm0094630101_pi300-10000_pass1_cl_src9.arf
[Sat Aug 18 05:08:13 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Aug 18 05:08:13 2012] Updating source flux to 2.3e-13
[Sat Aug 18 05:08:28 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting