[Fri Aug 17 23:00:21 2012] Detection parameters:
  Position = (334.5, 327.0) = 8 34 18.66 -45 45 17.0
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 144.9 +/- 31.1
  Background counts = 426.5
  Rate = 0.008 +/- 0.002

[Fri Aug 17 23:00:21 2012] Off-axis axis estimate = 3.34'
[Fri Aug 17 23:03:56 2012] Using EEF radius (= 8.10 ")to estimate initial spatial extent for simple fitting
[Fri Aug 17 23:03:56 2012] Initial guess for spatial extent in simple fitting = 8.10"
[Fri Aug 17 23:03:56 2012] source mask rpix=1.9, npix_max = 22, mask sum = 20, frac = 0.897
[Fri Aug 17 23:03:56 2012] Giving source the simple spatial ID 36 for pass 0, mean size = 8.10"
[Sat Aug 18 01:15:56 2012] fullrun_pn_xmm0094630101_pi300-10000_cl_pass0_src36.ximg exists
[Sat Aug 18 01:15:56 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0094630101_pi300-10000_cl_pass0_src36.csv
[Sat Aug 18 01:15:56 2012] fullrun_pn_xmm0094630101_pi300-10000_cl_pass0_src36_1.ximg exists
[Sat Aug 18 01:15:56 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0094630101_pi300-10000_cl_pass0_src36.csv
[Sat Aug 18 01:15:56 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0094630101_pi300-10000_cl_pass0_src36_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0094630101_pi300-10000_cl_pass0_src36.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Aug 18 01:15:57 2012] fullrun_pn_xmm0094630101_pi300-10000_cl_pass0_tfrozen_src36.ximg exists
[Sat Aug 18 01:15:57 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0094630101_pi300-10000_cl_pass0_tfrozen_src36.csv
[Sat Aug 18 01:15:57 2012] fullrun_pn_xmm0094630101_pi300-10000_cl_pass0_tfrozen_src36_1.ximg exists
[Sat Aug 18 01:15:57 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0094630101_pi300-10000_cl_pass0_tfrozen_src36.csv
[Sat Aug 18 01:15:57 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0094630101_pi300-10000_cl_pass0_tfrozen_src36_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0094630101_pi300-10000_cl_pass0_tfrozen_src36.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Aug 18 01:33:43 2012] Source 43 is offset by -3.410260 and -8.431618 pixels which is larger than
2 X fitted extent = 2.671343 x 2.671343, not incorporating fit results
[Sat Aug 18 01:33:43 2012] Vigneting correction estimate = 1.000000
[Sat Aug 18 01:33:43 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Aug 18 01:33:43 2012] Assessing source extent using major
[Sat Aug 18 01:33:43 2012] Source does appear to be extended
[Sat Aug 18 01:33:43 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Aug 18 01:33:55 2012] Using EEF radius (= 8.10 ")to estimate initial spatial extent for simple fitting
[Sat Aug 18 01:33:55 2012] Initial guess for spatial extent in simple fitting = 8.10"
[Sat Aug 18 01:33:55 2012] source mask rpix=1.9, npix_max = 22, mask sum = 20, frac = 0.897
[Sat Aug 18 01:33:55 2012] Giving source the simple spatial ID 29 for pass 1, mean size = 8.10"
[Sat Aug 18 03:11:20 2012] fullrun_pn_xmm0094630101_pi300-10000_cl_pass1_src29.ximg exists
[Sat Aug 18 03:11:20 2012] fullrun_pn_xmm0094630101_pi300-10000_cl_pass1_src29_1.ximg exists
[Sat Aug 18 03:11:20 2012] Fit fullrun_pn_xmm0094630101_pi300-10000_cl_pass1_src29 appears to have run properly
[Sat Aug 18 03:11:21 2012] fullrun_pn_xmm0094630101_pi300-10000_cl_pass1_tfrozen_src29.ximg exists
[Sat Aug 18 03:11:21 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0094630101_pi300-10000_cl_pass1_tfrozen_src29.csv
[Sat Aug 18 03:11:21 2012] fullrun_pn_xmm0094630101_pi300-10000_cl_pass1_tfrozen_src29_1.ximg exists
[Sat Aug 18 03:11:21 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0094630101_pi300-10000_cl_pass1_tfrozen_src29.csv
[Sat Aug 18 03:11:21 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0094630101_pi300-10000_cl_pass1_tfrozen_src29_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0094630101_pi300-10000_cl_pass1_tfrozen_src29.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Aug 18 03:29:28 2012] Spatial fit model total counts = 4657.640000, observed total counts = 5020.000000
[Sat Aug 18 03:29:28 2012] Offset between fit and detection position for source 43 = 2.034614 pixels
[Sat Aug 18 03:29:28 2012] 4658.176100 total counts/ 4569.920000 bgd. counts: snr = 1.305541
Spatial fit parameters:
  Offset between fit and detection position for source 43 = 2.034614 pixels
  Position = (332.5, 327.0) = 8 34 19.51 -45 45 13.2
  Extent = 5.4" x 5.4", rotation angle = 0
  Source counts = 88.3 +/- 68.3
  Background counts = 4569.9
  Rate = 0.004 +/- 0.003
  Deleting source due to low Poisson probability