[Fri Aug 17 23:00:21 2012] Detection parameters:
  Position = (319.3, 340.0) = 8 34 25.01 -45 44 16.4
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 285.1 +/- 34.7
  Background counts = 405.4
  Rate = 0.02 +/- 0.002

[Fri Aug 17 23:00:21 2012] Off-axis axis estimate = 3.37'
[Fri Aug 17 23:03:56 2012] Using EEF radius (= 8.11 ")to estimate initial spatial extent for simple fitting
[Fri Aug 17 23:03:56 2012] Initial guess for spatial extent in simple fitting = 8.11"
[Fri Aug 17 23:03:56 2012] source mask rpix=1.9, npix_max = 22, mask sum = 20, frac = 0.894
[Fri Aug 17 23:03:56 2012] Giving source the simple spatial ID 31 for pass 0, mean size = 8.11"
[Sat Aug 18 01:15:56 2012] fullrun_pn_xmm0094630101_pi300-10000_cl_pass0_src31.ximg exists
[Sat Aug 18 01:15:56 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0094630101_pi300-10000_cl_pass0_src31.csv
[Sat Aug 18 01:15:56 2012] fullrun_pn_xmm0094630101_pi300-10000_cl_pass0_src31_1.ximg exists
[Sat Aug 18 01:15:56 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0094630101_pi300-10000_cl_pass0_src31.csv
[Sat Aug 18 01:15:56 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0094630101_pi300-10000_cl_pass0_src31_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0094630101_pi300-10000_cl_pass0_src31.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Aug 18 01:15:57 2012] fullrun_pn_xmm0094630101_pi300-10000_cl_pass0_tfrozen_src31.ximg exists
[Sat Aug 18 01:15:57 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0094630101_pi300-10000_cl_pass0_tfrozen_src31.csv
[Sat Aug 18 01:15:57 2012] fullrun_pn_xmm0094630101_pi300-10000_cl_pass0_tfrozen_src31_1.ximg exists
[Sat Aug 18 01:15:57 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0094630101_pi300-10000_cl_pass0_tfrozen_src31.csv
[Sat Aug 18 01:15:57 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0094630101_pi300-10000_cl_pass0_tfrozen_src31_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0094630101_pi300-10000_cl_pass0_tfrozen_src31.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Aug 18 01:33:43 2012] Spatial fit model total counts = 4966.750000, observed total counts = 4969.000000
[Sat Aug 18 01:33:43 2012] Offset between fit and detection position for source 38 = 0.106368 pixels
[Sat Aug 18 01:33:43 2012] Warning, changing simple spatial fit ID from 31 to 27
[Sat Aug 18 01:33:43 2012] 4906.266500 total counts/ 4820.070000 bgd. counts: snr = 1.241546
Spatial fit parameters:
  Offset between fit and detection position for source 38 = 0.106368 pixels
  Position = (319.4, 340.0) = 8 34 24.97 -45 44 17.1
  Extent = 5.9 (3.0-10.8)", rotation angle = 0
  Source counts = 86.2 +/- 70.0
  Background counts = 4820.1
  Rate = 0.004 +/- 0.004
  Deleting source due to low Poisson probability