[Fri Aug 17 23:00:20 2012] Detection parameters:
  Position = (312.5, 352.0) = 8 34 27.81 -45 43 26.1
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 207.8 +/- 31.4
  Background counts = 366.4
  Rate = 0.01 +/- 0.002

[Fri Aug 17 23:00:21 2012] Off-axis axis estimate = 4.02'
[Fri Aug 17 23:03:56 2012] Using EEF radius (= 8.44 ")to estimate initial spatial extent for simple fitting
[Fri Aug 17 23:03:56 2012] Initial guess for spatial extent in simple fitting = 8.44"
[Fri Aug 17 23:03:56 2012] source mask rpix=1.9, npix_max = 23, mask sum = 20, frac = 0.840
[Fri Aug 17 23:03:56 2012] Giving source the simple spatial ID 25 for pass 0, mean size = 8.44"
[Sat Aug 18 01:15:55 2012] fullrun_pn_xmm0094630101_pi300-10000_cl_pass0_src25.ximg exists
[Sat Aug 18 01:15:55 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0094630101_pi300-10000_cl_pass0_src25.csv
[Sat Aug 18 01:15:55 2012] fullrun_pn_xmm0094630101_pi300-10000_cl_pass0_src25_1.ximg exists
[Sat Aug 18 01:15:55 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0094630101_pi300-10000_cl_pass0_src25.csv
[Sat Aug 18 01:15:55 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0094630101_pi300-10000_cl_pass0_src25_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0094630101_pi300-10000_cl_pass0_src25.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Aug 18 01:15:57 2012] fullrun_pn_xmm0094630101_pi300-10000_cl_pass0_tfrozen_src25.ximg exists
[Sat Aug 18 01:15:57 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0094630101_pi300-10000_cl_pass0_tfrozen_src25.csv
[Sat Aug 18 01:15:57 2012] fullrun_pn_xmm0094630101_pi300-10000_cl_pass0_tfrozen_src25_1.ximg exists
[Sat Aug 18 01:15:57 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0094630101_pi300-10000_cl_pass0_tfrozen_src25.csv
[Sat Aug 18 01:15:57 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0094630101_pi300-10000_cl_pass0_tfrozen_src25_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0094630101_pi300-10000_cl_pass0_tfrozen_src25.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Aug 18 01:33:43 2012] Warning, spatial fit 25 centroid is now closest to src. 32
[Sat Aug 18 01:33:43 2012] Spatial fit model total counts = 5704.980000, observed total counts = 4851.000000
[Sat Aug 18 01:33:43 2012] Poor agreement between spatial fit and data for source 31
It may help to tweak spatial fit manually
Not incorporating fit results
[Sat Aug 18 01:33:43 2012] Vigneting correction estimate = 1.000000
[Sat Aug 18 01:33:43 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Aug 18 01:33:43 2012] Assessing source extent using major
[Sat Aug 18 01:33:43 2012] Source does appear to be extended
[Sat Aug 18 01:33:43 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Aug 18 01:33:55 2012] Using EEF radius (= 8.44 ")to estimate initial spatial extent for simple fitting
[Sat Aug 18 01:33:55 2012] Initial guess for spatial extent in simple fitting = 8.44"
[Sat Aug 18 01:33:55 2012] source mask rpix=1.9, npix_max = 23, mask sum = 20, frac = 0.840
[Sat Aug 18 01:33:55 2012] Giving source the simple spatial ID 20 for pass 1, mean size = 8.44"
[Sat Aug 18 03:11:20 2012] fullrun_pn_xmm0094630101_pi300-10000_cl_pass1_src20.ximg exists
[Sat Aug 18 03:11:20 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0094630101_pi300-10000_cl_pass1_src20.csv
[Sat Aug 18 03:11:20 2012] fullrun_pn_xmm0094630101_pi300-10000_cl_pass1_src20_1.ximg exists
[Sat Aug 18 03:11:20 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0094630101_pi300-10000_cl_pass1_src20.csv
[Sat Aug 18 03:11:20 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0094630101_pi300-10000_cl_pass1_src20_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0094630101_pi300-10000_cl_pass1_src20.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Aug 18 03:11:21 2012] fullrun_pn_xmm0094630101_pi300-10000_cl_pass1_tfrozen_src20.ximg exists
[Sat Aug 18 03:11:21 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0094630101_pi300-10000_cl_pass1_tfrozen_src20.csv
[Sat Aug 18 03:11:21 2012] fullrun_pn_xmm0094630101_pi300-10000_cl_pass1_tfrozen_src20_1.ximg exists
[Sat Aug 18 03:11:21 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0094630101_pi300-10000_cl_pass1_tfrozen_src20.csv
[Sat Aug 18 03:11:21 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0094630101_pi300-10000_cl_pass1_tfrozen_src20_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0094630101_pi300-10000_cl_pass1_tfrozen_src20.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Aug 18 03:29:28 2012] Source 31 is offset by 3.425538 and -2.853792 pixels which is larger than
2 X fitted extent = 2.076009 x 2.076009, not incorporating fit results
[Sat Aug 18 03:29:28 2012] Warning, spatial fit 20 centroid is now closest to src. 26
[Sat Aug 18 03:29:29 2012] Vigneting correction estimate = 1.000000
[Sat Aug 18 03:29:29 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Aug 18 03:29:29 2012] Assessing source extent using major
[Sat Aug 18 03:29:29 2012] Source does appear to be extended
[Sat Aug 18 03:29:29 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Aug 18 03:29:41 2012] XMMSAS src. selection expression = ellipse(27141.925842, 30578.816132, 652.500000, 652.500000, 0.000000, X, Y)
[Sat Aug 18 03:29:41 2012] Writing source region out to fullrun_pn_xmm0094630101_pi300-10000_pass1_cl_src31_src.reg
[Sat Aug 18 03:29:41 2012] Extracting stamp from image fullrun_pn_xmm0094630101_pi300-10000_cl_sm2.00.img.gz, (275, 315) - (350, 390)
[Sat Aug 18 03:29:41 2012] XMMSAS bgd. selection expression = annulus(27141.925842, 30578.816132, 1087.500000, 2175.000000, X, Y) && !ellipse(26763.199188, 29881.586853, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26350.413818, 31413.968872, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26675.662872, 29125.232727, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27129.866699, 29451.644684, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24645.032260, 33807.398000, 1531.768044, 1531.768044, 0.000000, X, Y) && !ellipse(25568.377594, 33195.262543, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26344.296631, 32773.943909, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25452.014000, 32262.397200, 1444.904042, 1444.904042, 0.000000, X, Y) && !ellipse(27068.347015, 31263.367645, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25425.260895, 31199.867310, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26352.349335, 30932.293457, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26527.403381, 30193.228882, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28198.054016, 30045.513672, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25045.800000, 29851.896000, 1271.272037, 1271.272037, 0.000000, X, Y) && !ellipse(26616.511475, 29791.143280, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28382.257294, 29517.242493, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25596.605865, 29541.971436, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28401.293854, 28565.749023, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27835.663757, 28491.325897, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26720.198334, 28223.356445, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27347.863190, 27803.442322, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28045.105743, 27705.556702, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27211.041565, 28234.130554, 870.000000, 870.000000, 0.000000, X, Y)
[Sat Aug 18 03:29:41 2012] Writing fullrun_pn_xmm0094630101_pi300-10000_pass1_cl_src31.gif
[Sat Aug 18 03:52:28 2012] Mean detx,y = (1192.35, -2820.39) 
[Sat Aug 18 03:52:30 2012] Setting backscal keywords in source and bgd. spectrum
[Sat Aug 18 03:52:48 2012] Binned source spectrum to 10 counts/bin
[Sat Aug 18 03:52:48 2012] Setting source spectrum file to fullrun_pn_xmm0094630101_pi300-10000_pass1_cl_src31_src_b10.pi.gz
[Sat Aug 18 03:52:48 2012] Setting bgd. spectrum file to fullrun_pn_xmm0094630101_pi300-10000_pass1_cl_src31_bgd.pi.gz
[Sat Aug 18 04:32:45 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Sat Aug 18 04:32:45 2012] rmf not generated due to insufficient counts
[Sat Aug 18 05:08:12 2012] Updating aperture counts using extracted products
[Sat Aug 18 05:08:12 2012] Error reading totcts from fullrun_pn_xmm0094630101_pi300-10000_pass1_cl_src31_src_b10.pi.gz
[Sat Aug 18 05:08:13 2012] Calculating source flux in energy range 0.30-8.00
[Sat Aug 18 05:08:13 2012] Using photon index=1.80, rate=0.0131, arf fullrun_pn_xmm0094630101_pi300-10000_pass1_cl_src31.arf
[Sat Aug 18 05:08:13 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Aug 18 05:08:13 2012] Updating source flux to 4e-14
[Sat Aug 18 05:08:28 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting