[Fri Aug 17 23:00:20 2012] Detection parameters:
  Position = (294.1, 370.1) = 8 34 35.45 -45 42 5.3
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 170.9 +/- 28.3
  Background counts = 298.2
  Rate = 0.01 +/- 0.002

[Fri Aug 17 23:00:21 2012] Off-axis axis estimate = 5.20'
[Fri Aug 17 23:03:56 2012] Using EEF radius (= 9.03 ")to estimate initial spatial extent for simple fitting
[Fri Aug 17 23:03:56 2012] Initial guess for spatial extent in simple fitting = 9.03"
[Fri Aug 17 23:03:56 2012] source mask rpix=2.1, npix_max = 26, mask sum = 25, frac = 0.942
[Fri Aug 17 23:03:56 2012] Giving source the simple spatial ID 19 for pass 0, mean size = 9.03"
[Sat Aug 18 01:15:55 2012] fullrun_pn_xmm0094630101_pi300-10000_cl_pass0_src19.ximg exists
[Sat Aug 18 01:15:55 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0094630101_pi300-10000_cl_pass0_src19.csv
[Sat Aug 18 01:15:55 2012] fullrun_pn_xmm0094630101_pi300-10000_cl_pass0_src19_1.ximg exists
[Sat Aug 18 01:15:55 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0094630101_pi300-10000_cl_pass0_src19.csv
[Sat Aug 18 01:15:55 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0094630101_pi300-10000_cl_pass0_src19_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0094630101_pi300-10000_cl_pass0_src19.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Aug 18 01:15:56 2012] fullrun_pn_xmm0094630101_pi300-10000_cl_pass0_tfrozen_src19.ximg exists
[Sat Aug 18 01:15:56 2012] fullrun_pn_xmm0094630101_pi300-10000_cl_pass0_tfrozen_src19_1.ximg exists
[Sat Aug 18 01:15:56 2012] Fit fullrun_pn_xmm0094630101_pi300-10000_cl_pass0_tfrozen_src19 appears to have run properly
[Sat Aug 18 01:33:43 2012] Source 25 is offset by 0.843344 and -5.588783 pixels which is larger than
2 X fitted extent = 6.707450 x 1.230487, not incorporating fit results
[Sat Aug 18 01:33:43 2012] Spatial fit model total counts = 4046.040000, observed total counts = 3839.000000
[Sat Aug 18 01:33:43 2012] Offset between fit and detection position for source 25 = 1.659812 pixels
[Sat Aug 18 01:33:43 2012] 4061.361000 total counts/ 3755.890000 bgd. counts: snr = 4.984408
Spatial fit parameters:
  Offset between fit and detection position for source 25 = 1.659812 pixels
  Position = (293.1, 371.4) = 8 34 35.88 -45 42 0.4
  Extent = 18.1 (18.0-36.1)", rotation angle = 0
  Source counts = 305.5 +/- 63.7
  Background counts = 3755.9
  Rate = 0.02 +/- 0.003
[Sat Aug 18 01:33:43 2012] Vigneting correction estimate = 1.000000
[Sat Aug 18 01:33:43 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Aug 18 01:33:43 2012] Assessing source extent using major axis lower bound
[Sat Aug 18 01:33:43 2012] Source does appear to be extended
[Sat Aug 18 01:33:43 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Aug 18 01:33:43 2012] Source is confused with source 3
[Sat Aug 18 01:33:55 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Sat Aug 18 01:33:55 2012] Initial guess for spatial extent in simple fitting = 18.06"
[Sat Aug 18 01:33:55 2012] source mask rpix=4.2, npix_max = 86, mask sum = 90, frac = 1.040
[Sat Aug 18 01:33:55 2012] Giving source the simple spatial ID 15 for pass 1, mean size = 18.06"
[Sat Aug 18 03:11:20 2012] fullrun_pn_xmm0094630101_pi300-10000_cl_pass1_src15.ximg exists
[Sat Aug 18 03:11:20 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0094630101_pi300-10000_cl_pass1_src15.csv
[Sat Aug 18 03:11:20 2012] fullrun_pn_xmm0094630101_pi300-10000_cl_pass1_src15_1.ximg exists
[Sat Aug 18 03:11:20 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0094630101_pi300-10000_cl_pass1_src15.csv
[Sat Aug 18 03:11:20 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0094630101_pi300-10000_cl_pass1_src15_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0094630101_pi300-10000_cl_pass1_src15.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Aug 18 03:11:21 2012] fullrun_pn_xmm0094630101_pi300-10000_cl_pass1_tfrozen_src15.ximg exists
[Sat Aug 18 03:11:21 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0094630101_pi300-10000_cl_pass1_tfrozen_src15.csv
[Sat Aug 18 03:11:21 2012] fullrun_pn_xmm0094630101_pi300-10000_cl_pass1_tfrozen_src15_1.ximg exists
[Sat Aug 18 03:11:21 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0094630101_pi300-10000_cl_pass1_tfrozen_src15.csv
[Sat Aug 18 03:11:21 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0094630101_pi300-10000_cl_pass1_tfrozen_src15_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0094630101_pi300-10000_cl_pass1_tfrozen_src15.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Aug 18 03:29:28 2012] Warning, spatial fit 15 centroid is now closest to src. 31
[Sat Aug 18 03:29:29 2012] Vigneting correction estimate = 1.000000
[Sat Aug 18 03:29:29 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Aug 18 03:29:29 2012] Assessing source extent using major axis lower bound
[Sat Aug 18 03:29:29 2012] Source does appear to be extended
[Sat Aug 18 03:29:29 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Aug 18 03:29:41 2012] XMMSAS src. selection expression = ellipse(25452.014000, 32262.397200, 1083.678031, 1083.678031, 0.000000, X, Y)
[Sat Aug 18 03:29:41 2012] Writing source region out to fullrun_pn_xmm0094630101_pi300-10000_pass1_cl_src25_src.reg
[Sat Aug 18 03:29:41 2012] Extracting stamp from image fullrun_pn_xmm0094630101_pi300-10000_cl_sm2.00.img.gz, (231, 309) - (355, 434)
[Sat Aug 18 03:29:41 2012] XMMSAS bgd. selection expression = annulus(25452.014000, 32262.397200, 1806.130052, 3612.260104, X, Y) && !ellipse(26763.199188, 29881.586853, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26350.413818, 31413.968872, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26675.662872, 29125.232727, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25739.794250, 34157.803589, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27129.866699, 29451.644684, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23985.824800, 36879.427400, 1767.824051, 1767.824051, 0.000000, X, Y) && !ellipse(24320.561615, 36056.736298, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26290.542908, 34224.633331, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24645.032260, 33807.398000, 1531.768044, 1531.768044, 0.000000, X, Y) && !ellipse(25568.377594, 33195.262543, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26344.296631, 32773.943909, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27068.347015, 31263.367645, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25425.260895, 31199.867310, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26352.349335, 30932.293457, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27141.925842, 30578.816132, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26527.403381, 30193.228882, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28198.054016, 30045.513672, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25045.800000, 29851.896000, 1271.272037, 1271.272037, 0.000000, X, Y) && !ellipse(26616.511475, 29791.143280, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28382.257294, 29517.242493, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25596.605865, 29541.971436, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28401.293854, 28565.749023, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27835.663757, 28491.325897, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26720.198334, 28223.356445, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27347.863190, 27803.442322, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27211.041565, 28234.130554, 870.000000, 870.000000, 0.000000, X, Y)
[Sat Aug 18 03:29:41 2012] Writing fullrun_pn_xmm0094630101_pi300-10000_pass1_cl_src25.gif
[Sat Aug 18 03:49:00 2012] Mean detx,y = (-197.47, -4799.64) 
[Sat Aug 18 03:49:03 2012] Setting backscal keywords in source and bgd. spectrum
[Sat Aug 18 03:49:40 2012] Binned source spectrum to 10 counts/bin
[Sat Aug 18 03:49:40 2012] Setting source spectrum file to fullrun_pn_xmm0094630101_pi300-10000_pass1_cl_src25_src_b10.pi.gz
[Sat Aug 18 03:49:40 2012] Setting bgd. spectrum file to fullrun_pn_xmm0094630101_pi300-10000_pass1_cl_src25_bgd.pi.gz
[Sat Aug 18 05:08:12 2012] Updating aperture counts using extracted products
[Sat Aug 18 05:08:12 2012] Error reading totcts from fullrun_pn_xmm0094630101_pi300-10000_pass1_cl_src25_src_b10.pi.gz
[Sat Aug 18 05:08:13 2012] Calculating source flux in energy range 0.30-8.00
[Sat Aug 18 05:08:13 2012] Using photon index=1.80, rate=0.0153, arf fullrun_pn_xmm0094630101_pi300-10000_pass1_cl_src25.arf
[Sat Aug 18 05:08:13 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Aug 18 05:08:13 2012] Updating source flux to 4.7e-14
[Sat Aug 18 05:08:28 2012] Flag b found in src. 25 procflags, skipping spectral fitting
[Sat Aug 18 05:08:28 2012] Flag c found in src. 25 procflags, skipping spectral fitting