[Fri Aug 17 23:00:20 2012] Detection parameters:
  Position = (412.7, 199.0) = 8 33 46.07 -45 54 27.5
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 115.9 +/- 21.5
  Background counts = 143.9
  Rate = 0.006 +/- 0.001

[Fri Aug 17 23:00:21 2012] Off-axis axis estimate = 10.98'
[Fri Aug 17 23:03:56 2012] Using EEF radius (= 11.92 ")to estimate initial spatial extent for simple fitting
[Fri Aug 17 23:03:56 2012] Initial guess for spatial extent in simple fitting = 11.92"
[Fri Aug 17 23:03:56 2012] source mask rpix=2.7, npix_max = 41, mask sum = 42, frac = 1.000
[Fri Aug 17 23:03:56 2012] Giving source the simple spatial ID 16 for pass 0, mean size = 11.92"
[Sat Aug 18 01:15:55 2012] fullrun_pn_xmm0094630101_pi300-10000_cl_pass0_src16.ximg exists
[Sat Aug 18 01:15:55 2012] fullrun_pn_xmm0094630101_pi300-10000_cl_pass0_src16_1.ximg exists
[Sat Aug 18 01:15:55 2012] Fit fullrun_pn_xmm0094630101_pi300-10000_cl_pass0_src16 appears to have run properly
[Sat Aug 18 01:15:56 2012] fullrun_pn_xmm0094630101_pi300-10000_cl_pass0_tfrozen_src16.ximg exists
[Sat Aug 18 01:15:56 2012] fullrun_pn_xmm0094630101_pi300-10000_cl_pass0_tfrozen_src16_1.ximg exists
[Sat Aug 18 01:15:56 2012] Fit fullrun_pn_xmm0094630101_pi300-10000_cl_pass0_tfrozen_src16 appears to have run properly
[Sat Aug 18 01:33:43 2012] Spatial fit model total counts = 2153.040000, observed total counts = 2145.000000
[Sat Aug 18 01:33:43 2012] Offset between fit and detection position for source 21 = 4.123552 pixels
[Sat Aug 18 01:33:43 2012] 2157.249000 total counts/ 1733.890000 bgd. counts: snr = 10.167122
Spatial fit parameters:
  Offset between fit and detection position for source 21 = 4.123552 pixels
  Position = (412.1, 194.9) = 8 33 46.28 -45 54 47.3
  Extent = 23.7 (23.5-23.8)", rotation angle = 0
  Source counts = 423.4 +/- 46.4
  Background counts = 1733.9
  Rate = 0.02 +/- 0.002
[Sat Aug 18 01:33:43 2012] Vigneting correction estimate = 1.000000
[Sat Aug 18 01:33:43 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Aug 18 01:33:43 2012] Assessing source extent using major axis lower bound
[Sat Aug 18 01:33:43 2012] Source does appear to be extended
[Sat Aug 18 01:33:43 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Aug 18 01:33:55 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Sat Aug 18 01:33:55 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Sat Aug 18 01:33:55 2012] Initial guess for spatial extent in simple fitting = 23.72"
[Sat Aug 18 01:33:55 2012] source mask rpix=5.5, npix_max = 141, mask sum = 144, frac = 1.016
[Sat Aug 18 01:33:55 2012] Giving source the simple spatial ID 12 for pass 1, mean size = 23.72"
[Sat Aug 18 03:11:20 2012] fullrun_pn_xmm0094630101_pi300-10000_cl_pass1_src12.ximg exists
[Sat Aug 18 03:11:20 2012] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0094630101_pi300-10000_cl_pass1_src12.csv
[Sat Aug 18 03:11:20 2012] fullrun_pn_xmm0094630101_pi300-10000_cl_pass1_src12_1.ximg exists
[Sat Aug 18 03:11:20 2012] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0094630101_pi300-10000_cl_pass1_src12.csv
[Sat Aug 18 03:11:20 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0094630101_pi300-10000_cl_pass1_src12_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0094630101_pi300-10000_cl_pass1_src12.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Aug 18 03:11:21 2012] fullrun_pn_xmm0094630101_pi300-10000_cl_pass1_tfrozen_src12.ximg exists
[Sat Aug 18 03:11:21 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0094630101_pi300-10000_cl_pass1_tfrozen_src12.csv
[Sat Aug 18 03:11:21 2012] fullrun_pn_xmm0094630101_pi300-10000_cl_pass1_tfrozen_src12_1.ximg exists
[Sat Aug 18 03:11:21 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0094630101_pi300-10000_cl_pass1_tfrozen_src12.csv
[Sat Aug 18 03:11:21 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0094630101_pi300-10000_cl_pass1_tfrozen_src12_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0094630101_pi300-10000_cl_pass1_tfrozen_src12.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Aug 18 03:29:28 2012] Warning, spatial fit 12 centroid is now closest to src. 60
[Sat Aug 18 03:29:29 2012] Vigneting correction estimate = 1.000000
[Sat Aug 18 03:29:29 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Aug 18 03:29:29 2012] Assessing source extent using major axis lower bound
[Sat Aug 18 03:29:29 2012] Source does appear to be extended
[Sat Aug 18 03:29:29 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Aug 18 03:29:41 2012] XMMSAS src. selection expression = ellipse(35807.890800, 16910.766000, 1423.314041, 1423.314041, 0.000000, X, Y)
[Sat Aug 18 03:29:41 2012] Writing source region out to fullrun_pn_xmm0094630101_pi300-10000_pass1_cl_src21_src.reg
[Sat Aug 18 03:29:41 2012] Extracting stamp from image fullrun_pn_xmm0094630101_pi300-10000_cl_sm2.00.img.gz, (330, 113) - (494, 277)
[Sat Aug 18 03:29:41 2012] XMMSAS bgd. selection expression = annulus(35807.890800, 16910.766000, 2372.190068, 4744.380137, X, Y) && !ellipse(34898.057617, 20386.352478, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35442.604126, 19199.472076, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(38487.258972, 18529.504639, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35952.903412, 18475.440277, 870.000000, 870.000000, 0.000000, X, Y)
[Sat Aug 18 03:29:41 2012] Writing fullrun_pn_xmm0094630101_pi300-10000_pass1_cl_src21.gif
[Sat Aug 18 03:45:48 2012] Mean detx,y = (6648.36, 12293.24) 
[Sat Aug 18 03:45:50 2012] Setting backscal keywords in source and bgd. spectrum
[Sat Aug 18 03:47:05 2012] Binned source spectrum to 10 counts/bin
[Sat Aug 18 03:47:05 2012] Setting source spectrum file to fullrun_pn_xmm0094630101_pi300-10000_pass1_cl_src21_src_b10.pi.gz
[Sat Aug 18 03:47:05 2012] Setting bgd. spectrum file to fullrun_pn_xmm0094630101_pi300-10000_pass1_cl_src21_bgd.pi.gz
[Sat Aug 18 05:08:12 2012] Updating aperture counts using extracted products
[Sat Aug 18 05:08:12 2012] Error reading totcts from fullrun_pn_xmm0094630101_pi300-10000_pass1_cl_src21_src_b10.pi.gz
[Sat Aug 18 05:08:13 2012] Calculating source flux in energy range 0.30-8.00
[Sat Aug 18 05:08:13 2012] Using photon index=1.80, rate=0.0212, arf fullrun_pn_xmm0094630101_pi300-10000_pass1_cl_src21.arf
[Sat Aug 18 05:08:13 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Aug 18 05:08:13 2012] Updating source flux to 1.1e-13