[Fri Aug 17 23:00:20 2012] Detection parameters:
  Position = (286.8, 429.8) = 8 34 38.51 -45 37 44.2
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 195.5 +/- 21.5
  Background counts = 209.6
  Rate = 0.01 +/- 0.001

[Fri Aug 17 23:00:21 2012] Off-axis axis estimate = 9.56'
[Fri Aug 17 23:03:56 2012] Using EEF radius (= 11.21 ")to estimate initial spatial extent for simple fitting
[Fri Aug 17 23:03:56 2012] Initial guess for spatial extent in simple fitting = 11.21"
[Fri Aug 17 23:03:56 2012] source mask rpix=2.6, npix_max = 37, mask sum = 24, frac = 0.634
[Fri Aug 17 23:03:56 2012] Giving source the simple spatial ID 7 for pass 0, mean size = 11.21"
[Sat Aug 18 01:15:55 2012] fullrun_pn_xmm0094630101_pi300-10000_cl_pass0_src7.ximg exists
[Sat Aug 18 01:15:55 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0094630101_pi300-10000_cl_pass0_src7.csv
[Sat Aug 18 01:15:55 2012] fullrun_pn_xmm0094630101_pi300-10000_cl_pass0_src7_1.ximg exists
[Sat Aug 18 01:15:55 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0094630101_pi300-10000_cl_pass0_src7.csv
[Sat Aug 18 01:15:55 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0094630101_pi300-10000_cl_pass0_src7_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0094630101_pi300-10000_cl_pass0_src7.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Aug 18 01:15:56 2012] fullrun_pn_xmm0094630101_pi300-10000_cl_pass0_tfrozen_src7.ximg exists
[Sat Aug 18 01:15:56 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0094630101_pi300-10000_cl_pass0_tfrozen_src7.csv
[Sat Aug 18 01:15:56 2012] fullrun_pn_xmm0094630101_pi300-10000_cl_pass0_tfrozen_src7_1.ximg exists
[Sat Aug 18 01:15:56 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0094630101_pi300-10000_cl_pass0_tfrozen_src7.csv
[Sat Aug 18 01:15:56 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0094630101_pi300-10000_cl_pass0_tfrozen_src7_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0094630101_pi300-10000_cl_pass0_tfrozen_src7.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Aug 18 01:33:43 2012] Spatial fit model total counts = 2719.700000, observed total counts = 2246.000000
[Sat Aug 18 01:33:43 2012] Poor agreement between spatial fit and data for source 10
It may help to tweak spatial fit manually
Not incorporating fit results
[Sat Aug 18 01:33:43 2012] Spatial fit model total counts = 2793.920000, observed total counts = 2791.000000
[Sat Aug 18 01:33:43 2012] Offset between fit and detection position for source 10 = 5.032688 pixels
[Sat Aug 18 01:33:43 2012] Warning, changing simple spatial fit ID from 7 to 11
[Sat Aug 18 01:33:43 2012] 2794.830015 total counts/ 2794.830000 bgd. counts: snr = 0.000000
Spatial fit parameters:
  Offset between fit and detection position for source 10 = 5.032688 pixels
  Position = (289.8, 425.8) = 8 34 37.23 -45 38 3.5
  Extent = 21.4 (21.4-42.8)", rotation angle = 0
  Source counts = 0.0 +/- 52.9
  Background counts = 2794.8
  Rate = 8e-10 +/- 0.003
  Deleting source due to low Poisson probability