[Fri Aug 17 23:00:20 2012] Detection parameters:
  Position = (204.8, 208.9) = 8 35 12.67 -45 53 47.0
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 1193.2 +/- 45.0
  Background counts = 122.0
  Rate = 0.06 +/- 0.002

[Fri Aug 17 23:00:21 2012] Off-axis axis estimate = 9.39'
[Fri Aug 17 23:03:56 2012] Using EEF radius (= 11.13 ")to estimate initial spatial extent for simple fitting
[Fri Aug 17 23:03:56 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Fri Aug 17 23:03:56 2012] Initial guess for spatial extent in simple fitting = 11.13"
[Fri Aug 17 23:03:56 2012] source mask rpix=2.6, npix_max = 37, mask sum = 36, frac = 0.963
[Fri Aug 17 23:03:56 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 11.13"
[Sat Aug 18 01:15:55 2012] fullrun_pn_xmm0094630101_pi300-10000_cl_pass0_src1.ximg exists
[Sat Aug 18 01:15:55 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0094630101_pi300-10000_cl_pass0_src1.csv
[Sat Aug 18 01:15:55 2012] fullrun_pn_xmm0094630101_pi300-10000_cl_pass0_src1_1.ximg exists
[Sat Aug 18 01:15:55 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0094630101_pi300-10000_cl_pass0_src1.csv
[Sat Aug 18 01:15:55 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0094630101_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0094630101_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Aug 18 01:15:56 2012] fullrun_pn_xmm0094630101_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Sat Aug 18 01:15:56 2012] fullrun_pn_xmm0094630101_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Sat Aug 18 01:15:56 2012] Fit fullrun_pn_xmm0094630101_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Sat Aug 18 01:33:43 2012] Spatial fit model total counts = 3189.690000, observed total counts = 3179.000000
[Sat Aug 18 01:33:43 2012] Offset between fit and detection position for source 1 = 0.217669 pixels
[Sat Aug 18 01:33:43 2012] 3195.716000 total counts/ 2383.690000 bgd. counts: snr = 16.632022
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.217669 pixels
  Position = (205.0, 208.8) = 8 35 12.59 -45 53 47.3
  Extent = 5.9 (5.5-6.4)", rotation angle = 0
  Source counts = 812.0 +/- 56.5
  Background counts = 2383.7
  Rate = 0.04 +/- 0.003
[Sat Aug 18 01:33:43 2012] Vigneting correction estimate = 1.000000
[Sat Aug 18 01:33:43 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Aug 18 01:33:43 2012] Assessing source extent using major axis lower bound
[Sat Aug 18 01:33:43 2012] Source does appear to be extended
[Sat Aug 18 01:33:43 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Aug 18 01:33:55 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Sat Aug 18 01:33:55 2012] Initial guess for spatial extent in simple fitting = 5.85"
[Sat Aug 18 01:33:55 2012] source mask rpix=1.3, npix_max = 13, mask sum = 16, frac = 1.174
[Sat Aug 18 01:33:55 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 5.85"
[Sat Aug 18 03:11:20 2012] fullrun_pn_xmm0094630101_pi300-10000_cl_pass1_src1.ximg exists
[Sat Aug 18 03:11:20 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0094630101_pi300-10000_cl_pass1_src1.csv
[Sat Aug 18 03:11:20 2012] fullrun_pn_xmm0094630101_pi300-10000_cl_pass1_src1_1.ximg exists
[Sat Aug 18 03:11:20 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0094630101_pi300-10000_cl_pass1_src1.csv
[Sat Aug 18 03:11:20 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0094630101_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0094630101_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Aug 18 03:11:21 2012] fullrun_pn_xmm0094630101_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Sat Aug 18 03:11:21 2012] fullrun_pn_xmm0094630101_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Sat Aug 18 03:11:21 2012] Fit fullrun_pn_xmm0094630101_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Sat Aug 18 03:29:28 2012] Spatial fit model total counts = 2235.000000, observed total counts = 2235.000000
[Sat Aug 18 03:29:28 2012] Offset between fit and detection position for source 1 = 0.017897 pixels
[Sat Aug 18 03:29:28 2012] 2238.439000 total counts/ 1446.000000 bgd. counts: snr = 20.839231
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.017897 pixels
  Position = (205.0, 208.8) = 8 35 12.60 -45 53 47.2
  Extent = 5.7 (5.3-6.2)", rotation angle = 0
  Source counts = 792.4 +/- 47.3
  Background counts = 1446.0
  Rate = 0.04 +/- 0.002
[Sat Aug 18 03:29:28 2012] Vigneting correction estimate = 1.000000
[Sat Aug 18 03:29:28 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Aug 18 03:29:28 2012] Assessing source extent using major axis lower bound
[Sat Aug 18 03:29:28 2012] Source does appear to be extended
[Sat Aug 18 03:29:28 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Aug 18 03:29:40 2012] XMMSAS src. selection expression = ellipse(17788.144378, 18116.861600, 343.590010, 343.590010, 0.000000, X, Y)
[Sat Aug 18 03:29:40 2012] Writing source region out to fullrun_pn_xmm0094630101_pi300-10000_pass1_cl_src1_src.reg
[Sat Aug 18 03:29:40 2012] Extracting stamp from image fullrun_pn_xmm0094630101_pi300-10000_cl_sm2.00.img.gz, (185, 189) - (225, 229)
[Sat Aug 18 03:29:40 2012] XMMSAS bgd. selection expression = annulus(17788.144378, 18116.861600, 572.650016, 1145.300033, X, Y)
[Sat Aug 18 03:29:40 2012] Writing fullrun_pn_xmm0094630101_pi300-10000_pass1_cl_src1.gif
[Sat Aug 18 03:29:56 2012] Mean detx,y = (-10663.64, 7359.20) 
[Sat Aug 18 03:29:58 2012] Setting backscal keywords in source and bgd. spectrum
[Sat Aug 18 03:30:08 2012] Binned source spectrum to 10 counts/bin
[Sat Aug 18 03:30:09 2012] Setting source spectrum file to fullrun_pn_xmm0094630101_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Sat Aug 18 03:30:09 2012] Setting bgd. spectrum file to fullrun_pn_xmm0094630101_pi300-10000_pass1_cl_src1_bgd.pi.gz
[Sat Aug 18 05:08:12 2012] Updating aperture counts using extracted products
[Sat Aug 18 05:08:12 2012] Error reading totcts from fullrun_pn_xmm0094630101_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Sat Aug 18 05:08:13 2012] Calculating source flux in energy range 0.30-8.00
[Sat Aug 18 05:08:13 2012] Using photon index=1.80, rate=0.0397, arf fullrun_pn_xmm0094630101_pi300-10000_pass1_cl_src1.arf
[Sat Aug 18 05:08:13 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Aug 18 05:08:13 2012] Updating source flux to 2.9e-13
[Sat Aug 18 05:09:55 2012] Reading fit data from xmm0094630101/analysis//spectral/fullrun_pn_xmm0094630101_pi300-10000_pass1_cl_src1_pl.csv
[Sat Aug 18 05:09:55 2012] Spectral fit parameter nH value = 4.89077e+21
[Sat Aug 18 05:09:55 2012] Spectral fit parameter PhoIndex value = 5.32265
[Sat Aug 18 05:09:55 2012] Failed to get F(0.3-8.0) from xmm0094630101/analysis//spectral/fullrun_pn_xmm0094630101_pi300-10000_pass1_cl_src1_pl.csv, possibly due to different flux energy range selected
[Sat Aug 18 05:09:55 2012] Calculating source flux in energy range 0.30-8.00
[Sat Aug 18 05:09:55 2012] Using Nh = 4.9e+21, photon index=5.32, rate=0.0397, arf fullrun_pn_xmm0094630101_pi300-10000_pass1_cl_src1.arf
[Sat Aug 18 05:09:55 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Aug 18 05:09:55 2012] Updating source flux to 1.7e-13