[Mon Aug 27 13:57:30 2012] Detection parameters:
  Position = (185.6, 200.2) = 8 6 8.17 24 44 22.1
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 2463.0 +/- 59.0
  Background counts = 40.3
  Rate = 0.1 +/- 0.003

[Mon Aug 27 13:57:31 2012] Off-axis axis estimate = 10.85'
[Mon Aug 27 13:59:34 2012] Using EEF radius (= 11.85 ")to estimate initial spatial extent for simple fitting
[Mon Aug 27 13:59:34 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Mon Aug 27 13:59:34 2012] Initial guess for spatial extent in simple fitting = 11.85"
[Mon Aug 27 13:59:34 2012] source mask rpix=2.7, npix_max = 41, mask sum = 42, frac = 1.010
[Mon Aug 27 13:59:34 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 11.85"
[Mon Aug 27 14:45:20 2012] fullrun_pn_xmm0094530401_pi300-10000_cl_pass0_src1.ximg exists
[Mon Aug 27 14:45:20 2012] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0094530401_pi300-10000_cl_pass0_src1.csv
[Mon Aug 27 14:45:20 2012] fullrun_pn_xmm0094530401_pi300-10000_cl_pass0_src1_1.ximg exists
[Mon Aug 27 14:45:20 2012] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0094530401_pi300-10000_cl_pass0_src1.csv
[Mon Aug 27 14:45:20 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0094530401_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0094530401_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Aug 27 14:45:20 2012] fullrun_pn_xmm0094530401_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Mon Aug 27 14:45:20 2012] fullrun_pn_xmm0094530401_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Mon Aug 27 14:45:20 2012] Fit fullrun_pn_xmm0094530401_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Mon Aug 27 15:55:02 2012] Warning: source 1 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 1 at 15.566955 pixels away
[Mon Aug 27 15:55:02 2012] Vigneting correction estimate = 1.000000
[Mon Aug 27 15:55:02 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Aug 27 15:55:02 2012] Assessing source extent using major
[Mon Aug 27 15:55:02 2012] Source does appear to be extended
[Mon Aug 27 15:55:02 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Aug 27 15:55:21 2012] Using EEF radius (= 11.85 ")to estimate initial spatial extent for simple fitting
[Mon Aug 27 15:55:21 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Mon Aug 27 15:55:21 2012] Initial guess for spatial extent in simple fitting = 11.85"
[Mon Aug 27 15:55:21 2012] source mask rpix=2.7, npix_max = 41, mask sum = 42, frac = 1.010
[Mon Aug 27 15:55:21 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 11.85"
[Mon Aug 27 16:37:02 2012] fullrun_pn_xmm0094530401_pi300-10000_cl_pass1_src1.ximg exists
[Mon Aug 27 16:37:02 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0094530401_pi300-10000_cl_pass1_src1.csv
[Mon Aug 27 16:37:02 2012] fullrun_pn_xmm0094530401_pi300-10000_cl_pass1_src1_1.ximg exists
[Mon Aug 27 16:37:02 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0094530401_pi300-10000_cl_pass1_src1.csv
[Mon Aug 27 16:37:02 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0094530401_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0094530401_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Aug 27 16:37:03 2012] fullrun_pn_xmm0094530401_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Mon Aug 27 16:37:03 2012] fullrun_pn_xmm0094530401_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Mon Aug 27 16:37:03 2012] Fit fullrun_pn_xmm0094530401_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Mon Aug 27 17:35:04 2012] Spatial fit model total counts = 2338.740000, observed total counts = 2338.000000
[Mon Aug 27 17:35:04 2012] Offset between fit and detection position for source 1 = 0.254366 pixels
[Mon Aug 27 17:35:04 2012] 2341.112000 total counts/ 794.922000 bgd. counts: snr = 54.840398
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.254366 pixels
  Position = (185.8, 200.4) = 8 6 8.13 24 44 21.9
  Extent = 6.2 (6.0-6.5)", rotation angle = 0
  Source counts = 1546.2 +/- 48.4
  Background counts = 794.9
  Rate = 0.09 +/- 0.003
[Mon Aug 27 17:35:04 2012] Vigneting correction estimate = 1.000000
[Mon Aug 27 17:35:04 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Aug 27 17:35:04 2012] Assessing source extent using major axis lower bound
[Mon Aug 27 17:35:04 2012] Source does appear to be extended
[Mon Aug 27 17:35:04 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Aug 27 17:35:34 2012] Counts = 1546.190000, rescaling region sizes by 2.000000
[Mon Aug 27 17:35:34 2012] XMMSAS src. selection expression = ellipse(16113.127400, 17387.520200, 749.449222, 749.449222, 0.000000, X, Y)
[Mon Aug 27 17:35:34 2012] Writing source region out to fullrun_pn_xmm0094530401_pi300-10000_pass1_cl_src1_src.reg
[Mon Aug 27 17:35:34 2012] Extracting stamp from image fullrun_pn_xmm0094530401_pi300-10000_cl_sm2.00.img.gz, (143, 157) - (229, 243)
[Mon Aug 27 17:35:34 2012] XMMSAS bgd. selection expression = annulus(16113.127400, 17387.520200, 2498.164072, 4996.328144, X, Y) && !ellipse(19901.907867, 22203.789062, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21122.958496, 19386.225510, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19575.896000, 15803.143760, 699.760020, 699.760020, 0.000000, X, Y) && !ellipse(15537.139267, 15891.369293, 870.000000, 870.000000, 0.000000, X, Y)
[Mon Aug 27 17:35:34 2012] Writing fullrun_pn_xmm0094530401_pi300-10000_pass1_cl_src1.gif
[Mon Aug 27 17:35:40 2012] Mean detx,y = (10460.61, -4535.02) 
[Mon Aug 27 17:35:43 2012] Setting backscal keywords in source and bgd. spectrum
[Mon Aug 27 17:36:36 2012] grppha failed
[Mon Aug 27 17:36:36 2012] Setting source spectrum file to fullrun_pn_xmm0094530401_pi300-10000_pass1_cl_src1_src.pi.gz
[Mon Aug 27 17:36:36 2012] Setting bgd. spectrum file to fullrun_pn_xmm0094530401_pi300-10000_pass1_cl_src1_bgd.pi.gz
[Mon Aug 27 18:03:25 2012] Updating aperture counts using extracted products
[Mon Aug 27 18:03:25 2012] Error reading totcts from fullrun_pn_xmm0094530401_pi300-10000_pass1_cl_src1_src.pi.gz
[Mon Aug 27 18:03:26 2012] No arf file for this source, not re-computing flux
[Mon Aug 27 18:03:30 2012] Source 1 has no response, skipping
[Mon Aug 27 18:03:31 2012] xmm0094530401/analysis//spectral/fullrun_pn_xmm0094530401_pi300-10000_pass1_cl_src1_pl.csv not found, spectral fit skipped or did not complete