[Mon Aug 27 13:58:17 2012] Detection parameters:
  Position = (185.6, 200.2) = 8 6 8.19 24 44 22.0
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 1037.7 +/- 38.9
  Background counts = 13.1
  Rate = 0.08 +/- 0.003

[Mon Aug 27 13:58:17 2012] Off-axis axis estimate = 10.85'
[Mon Aug 27 15:16:25 2012] Using EEF radius (= 11.85 ")to estimate initial spatial extent for simple fitting
[Mon Aug 27 15:16:25 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Mon Aug 27 15:16:25 2012] Initial guess for spatial extent in simple fitting = 11.85"
[Mon Aug 27 15:16:25 2012] source mask rpix=2.7, npix_max = 41, mask sum = 42, frac = 1.010
[Mon Aug 27 15:16:25 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 11.85"
[Mon Aug 27 15:54:53 2012] fullrun_mos2_xmm0094530401_pi300-10000_cl_pass0_src1.ximg exists
[Mon Aug 27 15:54:53 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0094530401_pi300-10000_cl_pass0_src1.csv
[Mon Aug 27 15:54:53 2012] fullrun_mos2_xmm0094530401_pi300-10000_cl_pass0_src1_1.ximg exists
[Mon Aug 27 15:54:53 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0094530401_pi300-10000_cl_pass0_src1.csv
[Mon Aug 27 15:54:53 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0094530401_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0094530401_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Aug 27 15:54:54 2012] fullrun_mos2_xmm0094530401_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Mon Aug 27 15:54:54 2012] fullrun_mos2_xmm0094530401_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Mon Aug 27 15:54:54 2012] Fit fullrun_mos2_xmm0094530401_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Mon Aug 27 15:55:12 2012] Warning: source 1 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 1 at 14.461118 pixels away
[Mon Aug 27 15:55:12 2012] Warning: source 10 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 1 at 11.257171 pixels away
[Mon Aug 27 15:55:12 2012] Vigneting correction estimate = 1.000000
[Mon Aug 27 15:55:12 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Aug 27 15:55:12 2012] Assessing source extent using major
[Mon Aug 27 15:55:12 2012] Source does appear to be extended
[Mon Aug 27 15:55:12 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Aug 27 17:05:36 2012] Using EEF radius (= 11.85 ")to estimate initial spatial extent for simple fitting
[Mon Aug 27 17:05:36 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Mon Aug 27 17:05:36 2012] Initial guess for spatial extent in simple fitting = 11.85"
[Mon Aug 27 17:05:36 2012] source mask rpix=2.7, npix_max = 41, mask sum = 42, frac = 1.010
[Mon Aug 27 17:05:36 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 11.85"
[Mon Aug 27 17:34:53 2012] fullrun_mos2_xmm0094530401_pi300-10000_cl_pass1_src1.ximg exists
[Mon Aug 27 17:34:53 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0094530401_pi300-10000_cl_pass1_src1.csv
[Mon Aug 27 17:34:53 2012] fullrun_mos2_xmm0094530401_pi300-10000_cl_pass1_src1_1.ximg exists
[Mon Aug 27 17:34:53 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0094530401_pi300-10000_cl_pass1_src1.csv
[Mon Aug 27 17:34:53 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0094530401_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0094530401_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Aug 27 17:34:53 2012] fullrun_mos2_xmm0094530401_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Mon Aug 27 17:34:53 2012] fullrun_mos2_xmm0094530401_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Mon Aug 27 17:34:53 2012] Fit fullrun_mos2_xmm0094530401_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Mon Aug 27 17:35:23 2012] Spatial fit model total counts = 1163.340000, observed total counts = 1166.000000
[Mon Aug 27 17:35:23 2012] Offset between fit and detection position for source 1 = 0.225860 pixels
[Mon Aug 27 17:35:23 2012] 1162.832000 total counts/ 414.959000 bgd. counts: snr = 36.713455
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.225860 pixels
  Position = (185.7, 200.4) = 8 6 8.16 24 44 22.0
  Extent = 6.1 (5.7-6.5)", rotation angle = 0
  Source counts = 747.9 +/- 34.1
  Background counts = 415.0
  Rate = 0.03 +/- 0.001
[Mon Aug 27 17:35:23 2012] Vigneting correction estimate = 1.000000
[Mon Aug 27 17:35:23 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Aug 27 17:35:23 2012] Assessing source extent using major axis lower bound
[Mon Aug 27 17:35:23 2012] Source does appear to be extended
[Mon Aug 27 17:35:23 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Aug 27 17:56:35 2012] XMMSAS src. selection expression = ellipse(16104.117400, 17388.153400, 366.228611, 366.228611, 0.000000, X, Y)
[Mon Aug 27 17:56:35 2012] Writing source region out to fullrun_mos2_xmm0094530401_pi300-10000_pass1_cl_src1_src.reg
[Mon Aug 27 17:56:35 2012] Extracting stamp from image fullrun_mos2_xmm0094530401_pi300-10000_cl_sm2.00.img.gz, (165, 179) - (207, 221)
[Mon Aug 27 17:56:35 2012] XMMSAS bgd. selection expression = annulus(16104.117400, 17388.153400, 610.381018, 1220.762035, X, Y) && !ellipse(15529.010895, 15934.877258, 870.000000, 870.000000, 0.000000, X, Y)
[Mon Aug 27 17:56:35 2012] Writing fullrun_mos2_xmm0094530401_pi300-10000_pass1_cl_src1.gif
[Mon Aug 27 17:56:38 2012] Mean detx,y = (-10286.63, 4479.64) 
[Mon Aug 27 17:56:39 2012] Setting backscal keywords in source and bgd. spectrum
[Mon Aug 27 17:56:46 2012] grppha failed
[Mon Aug 27 17:56:46 2012] Setting source spectrum file to fullrun_mos2_xmm0094530401_pi300-10000_pass1_cl_src1_src.pi.gz
[Mon Aug 27 17:56:46 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0094530401_pi300-10000_pass1_cl_src1_bgd.pi.gz
[Mon Aug 27 18:03:26 2012] Updating aperture counts using extracted products
[Mon Aug 27 18:03:26 2012] Error reading totcts from fullrun_mos2_xmm0094530401_pi300-10000_pass1_cl_src1_src.pi.gz
[Mon Aug 27 18:03:26 2012] No arf file for this source, not re-computing flux
[Mon Aug 27 18:03:29 2012] Source 1 has no response, skipping
[Mon Aug 27 18:03:30 2012] xmm0094530401/analysis//spectral/fullrun_mos2_xmm0094530401_pi300-10000_pass1_cl_src1_pl.csv not found, spectral fit skipped or did not complete