[Mon Aug 27 13:57:53 2012] Detection parameters:
  Position = (226.9, 183.7) = 8 5 54.98 24 43 10.2
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 90.7 +/- 12.7
  Background counts = 12.8
  Rate = 0.006 +/- 0.0008

[Mon Aug 27 13:57:53 2012] Off-axis axis estimate = 9.80'
[Mon Aug 27 14:45:21 2012] Using EEF radius (= 11.33 ")to estimate initial spatial extent for simple fitting
[Mon Aug 27 14:45:21 2012] Initial guess for spatial extent in simple fitting = 11.33"
[Mon Aug 27 14:45:21 2012] source mask rpix=2.6, npix_max = 38, mask sum = 36, frac = 0.934
[Mon Aug 27 14:45:21 2012] Giving source the simple spatial ID 5 for pass 0, mean size = 11.33"
[Mon Aug 27 15:16:24 2012] fullrun_mos1_xmm0094530401_pi300-10000_cl_pass0_src5.ximg exists
[Mon Aug 27 15:16:24 2012] fullrun_mos1_xmm0094530401_pi300-10000_cl_pass0_src5_1.ximg exists
[Mon Aug 27 15:16:24 2012] Fit fullrun_mos1_xmm0094530401_pi300-10000_cl_pass0_src5 appears to have run properly
[Mon Aug 27 15:16:24 2012] fullrun_mos1_xmm0094530401_pi300-10000_cl_pass0_tfrozen_src5.ximg exists
[Mon Aug 27 15:16:24 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0094530401_pi300-10000_cl_pass0_tfrozen_src5.csv
[Mon Aug 27 15:16:24 2012] fullrun_mos1_xmm0094530401_pi300-10000_cl_pass0_tfrozen_src5_1.ximg exists
[Mon Aug 27 15:16:24 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0094530401_pi300-10000_cl_pass0_tfrozen_src5.csv
[Mon Aug 27 15:16:24 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0094530401_pi300-10000_cl_pass0_tfrozen_src5_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0094530401_pi300-10000_cl_pass0_tfrozen_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Aug 27 15:55:07 2012] Source 11 is offset by -6.193696 and 4.785613 pixels which is larger than
2 X fitted extent = 1.268235 x 1.268235, not incorporating fit results
[Mon Aug 27 15:55:07 2012] Vigneting correction estimate = 1.000000
[Mon Aug 27 15:55:07 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Aug 27 15:55:07 2012] Assessing source extent using major
[Mon Aug 27 15:55:07 2012] Source does appear to be extended
[Mon Aug 27 15:55:07 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Aug 27 16:37:03 2012] Using EEF radius (= 11.33 ")to estimate initial spatial extent for simple fitting
[Mon Aug 27 16:37:03 2012] Initial guess for spatial extent in simple fitting = 11.33"
[Mon Aug 27 16:37:03 2012] source mask rpix=2.6, npix_max = 38, mask sum = 36, frac = 0.934
[Mon Aug 27 16:37:03 2012] Giving source the simple spatial ID 5 for pass 1, mean size = 11.33"
[Mon Aug 27 17:05:36 2012] fullrun_mos1_xmm0094530401_pi300-10000_cl_pass1_src5.ximg exists
[Mon Aug 27 17:05:36 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0094530401_pi300-10000_cl_pass1_src5.csv
[Mon Aug 27 17:05:36 2012] fullrun_mos1_xmm0094530401_pi300-10000_cl_pass1_src5_1.ximg exists
[Mon Aug 27 17:05:36 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0094530401_pi300-10000_cl_pass1_src5.csv
[Mon Aug 27 17:05:36 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0094530401_pi300-10000_cl_pass1_src5_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0094530401_pi300-10000_cl_pass1_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Aug 27 17:05:36 2012] fullrun_mos1_xmm0094530401_pi300-10000_cl_pass1_tfrozen_src5.ximg exists
[Mon Aug 27 17:05:36 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0094530401_pi300-10000_cl_pass1_tfrozen_src5.csv
[Mon Aug 27 17:05:36 2012] fullrun_mos1_xmm0094530401_pi300-10000_cl_pass1_tfrozen_src5_1.ximg exists
[Mon Aug 27 17:05:36 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0094530401_pi300-10000_cl_pass1_tfrozen_src5.csv
[Mon Aug 27 17:05:36 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0094530401_pi300-10000_cl_pass1_tfrozen_src5_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0094530401_pi300-10000_cl_pass1_tfrozen_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Aug 27 17:35:08 2012] Warning: source 5 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 11 at 14.599933 pixels away
[Mon Aug 27 17:35:08 2012] Vigneting correction estimate = 1.000000
[Mon Aug 27 17:35:08 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Aug 27 17:35:08 2012] Assessing source extent using major
[Mon Aug 27 17:35:08 2012] Source does appear to be extended
[Mon Aug 27 17:35:08 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Aug 27 17:50:55 2012] XMMSAS src. selection expression = ellipse(19694.337677, 15936.925613, 652.500000, 652.500000, 0.000000, X, Y)
[Mon Aug 27 17:50:55 2012] Writing source region out to fullrun_mos1_xmm0094530401_pi300-10000_pass1_cl_src11_src.reg
[Mon Aug 27 17:50:55 2012] Extracting stamp from image fullrun_mos1_xmm0094530401_pi300-10000_cl_sm2.00.img.gz, (189, 146) - (264, 221)
[Mon Aug 27 17:50:55 2012] XMMSAS bgd. selection expression = annulus(19694.337677, 15936.925613, 1087.500000, 2175.000000, X, Y)
[Mon Aug 27 17:50:55 2012] Writing fullrun_mos1_xmm0094530401_pi300-10000_pass1_cl_src11.gif
[Mon Aug 27 17:51:58 2012] Mean detx,y = (6935.12, 7030.62) 
[Mon Aug 27 17:51:58 2012] Setting backscal keywords in source and bgd. spectrum
[Mon Aug 27 17:52:16 2012] grppha failed
[Mon Aug 27 17:52:16 2012] Setting source spectrum file to fullrun_mos1_xmm0094530401_pi300-10000_pass1_cl_src11_src.pi.gz
[Mon Aug 27 17:52:16 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0094530401_pi300-10000_pass1_cl_src11_bgd.pi.gz
[Mon Aug 27 17:56:33 2012] Not generating rmf since there are only 90 counts
[Mon Aug 27 17:56:33 2012] rmf not generated due to insufficient counts
[Mon Aug 27 18:03:26 2012] Updating aperture counts using extracted products
[Mon Aug 27 18:03:26 2012] Error reading totcts from fullrun_mos1_xmm0094530401_pi300-10000_pass1_cl_src11_src.pi.gz
[Mon Aug 27 18:03:26 2012] No arf file for this source, not re-computing flux
[Mon Aug 27 18:03:28 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Mon Aug 27 18:03:29 2012] xmm0094530401/analysis//spectral/fullrun_mos1_xmm0094530401_pi300-10000_pass1_cl_src11_pl.csv not found, spectral fit skipped or did not complete