[Thu Feb 23 00:33:57 2012] Detection parameters:
  Position = (286.5, 176.0) = 5 46 57.61 -69 42 30.5
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 64.3 +/- 12.3
  Background counts = 23.7
  Rate = 0.008 +/- 0.002

[Thu Feb 23 00:33:58 2012] Off-axis axis estimate = 8.92'
[Thu Feb 23 00:49:19 2012] Using EEF radius (= 10.89 ")to estimate initial spatial extent for simple fitting
[Thu Feb 23 00:49:19 2012] Initial guess for spatial extent in simple fitting = 10.89"
[Thu Feb 23 00:49:19 2012] source mask rpix=2.5, npix_max = 36, mask sum = 36, frac = 0.998
[Thu Feb 23 00:49:19 2012] Giving source the simple spatial ID 4 for pass 0, mean size = 10.89"
[Thu Feb 23 01:08:48 2012] fullrun_mos1_xmm0094410401_pi300-10000_cl_pass0_src4.ximg exists
[Thu Feb 23 01:08:48 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0094410401_pi300-10000_cl_pass0_src4.csv
[Thu Feb 23 01:08:48 2012] fullrun_mos1_xmm0094410401_pi300-10000_cl_pass0_src4_1.ximg exists
[Thu Feb 23 01:08:48 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0094410401_pi300-10000_cl_pass0_src4.csv
[Thu Feb 23 01:08:48 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0094410401_pi300-10000_cl_pass0_src4_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0094410401_pi300-10000_cl_pass0_src4.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Feb 23 01:08:48 2012] fullrun_mos1_xmm0094410401_pi300-10000_cl_pass0_tfrozen_src4.ximg exists
[Thu Feb 23 01:08:48 2012] fullrun_mos1_xmm0094410401_pi300-10000_cl_pass0_tfrozen_src4_1.ximg exists
[Thu Feb 23 01:08:48 2012] Fit fullrun_mos1_xmm0094410401_pi300-10000_cl_pass0_tfrozen_src4 appears to have run properly
[Thu Feb 23 01:14:35 2012] Warning, spatial fit 4 centroid is now closest to src. 4
[Thu Feb 23 01:14:35 2012] Spatial fit model total counts = 188.750000, observed total counts = 188.000000
[Thu Feb 23 01:14:35 2012] Offset between fit and detection position for source 3 = 2.039339 pixels
[Thu Feb 23 01:14:35 2012] Warning, changing simple spatial fit ID from 4 to 5
[Thu Feb 23 01:14:35 2012] 181.848600 total counts/ 104.144000 bgd. counts: snr = 7.614293
Spatial fit parameters:
  Offset between fit and detection position for source 3 = 2.039339 pixels
  Position = (284.8, 177.2) = 5 46 59.02 -69 42 26.0
  Extent = 14.9 (3.8-21.9)", rotation angle = 0
  Source counts = 77.7 +/- 13.5
  Background counts = 104.1
  Rate = 0.01 +/- 0.002
[Thu Feb 23 01:14:35 2012] Vigneting correction estimate = 1.000000
[Thu Feb 23 01:14:35 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Feb 23 01:14:35 2012] Assessing source extent using major axis lower bound
[Thu Feb 23 01:14:35 2012] Source does appear to be extended
[Thu Feb 23 01:14:35 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Feb 23 01:31:27 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Thu Feb 23 01:31:27 2012] Initial guess for spatial extent in simple fitting = 14.86"
[Thu Feb 23 01:31:27 2012] source mask rpix=3.4, npix_max = 61, mask sum = 64, frac = 1.043
[Thu Feb 23 01:31:27 2012] Giving source the simple spatial ID 4 for pass 1, mean size = 14.86"
[Thu Feb 23 01:49:54 2012] fullrun_mos1_xmm0094410401_pi300-10000_cl_pass1_src4.ximg exists
[Thu Feb 23 01:49:54 2012] fullrun_mos1_xmm0094410401_pi300-10000_cl_pass1_src4_1.ximg exists
[Thu Feb 23 01:49:54 2012] Fit fullrun_mos1_xmm0094410401_pi300-10000_cl_pass1_src4 appears to have run properly
[Thu Feb 23 01:49:54 2012] fullrun_mos1_xmm0094410401_pi300-10000_cl_pass1_tfrozen_src4.ximg exists
[Thu Feb 23 01:49:54 2012] fullrun_mos1_xmm0094410401_pi300-10000_cl_pass1_tfrozen_src4_1.ximg exists
[Thu Feb 23 01:49:54 2012] Fit fullrun_mos1_xmm0094410401_pi300-10000_cl_pass1_tfrozen_src4 appears to have run properly
[Thu Feb 23 01:55:41 2012] Spatial fit model total counts = 296.999000, observed total counts = 297.000000
[Thu Feb 23 01:55:41 2012] Offset between fit and detection position for source 3 = 0.391803 pixels
[Thu Feb 23 01:55:41 2012] 282.309700 total counts/ 232.154000 bgd. counts: snr = 3.291791
Spatial fit parameters:
  Offset between fit and detection position for source 3 = 0.391803 pixels
  Position = (284.5, 177.0) = 5 46 59.31 -69 42 26.7
  Extent = 11.7 (3.7-18.2)", rotation angle = 0
  Source counts = 50.2 +/- 16.8
  Background counts = 232.2
  Rate = 0.009 +/- 0.003
[Thu Feb 23 01:55:41 2012] Vigneting correction estimate = 1.000000
[Thu Feb 23 01:55:41 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Feb 23 01:55:41 2012] Assessing source extent using major axis lower bound
[Thu Feb 23 01:55:41 2012] Source does appear to be extended
[Thu Feb 23 01:55:41 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Feb 23 02:05:20 2012] XMMSAS src. selection expression = ellipse(24699.201880, 15352.383600, 701.790020, 701.790020, 0.000000, X, Y)
[Thu Feb 23 02:05:20 2012] Writing source region out to fullrun_mos1_xmm0094410401_pi300-10000_pass1_cl_src3_src.reg
[Thu Feb 23 02:05:20 2012] Extracting stamp from image fullrun_mos1_xmm0094410401_pi300-10000_cl_sm2.00.img.gz, (244, 137) - (325, 217)
[Thu Feb 23 02:05:20 2012] XMMSAS bgd. selection expression = annulus(24699.201880, 15352.383600, 1169.650034, 2339.300067, X, Y) && !ellipse(22731.080800, 16404.065600, 1585.920046, 1585.920046, 0.000000, X, Y) && !ellipse(21473.208000, 16874.474000, 1703.024049, 1703.024049, 0.000000, X, Y) && !ellipse(24535.520752, 14437.310638, 870.000000, 870.000000, 0.000000, X, Y)
[Thu Feb 23 02:05:20 2012] Writing fullrun_mos1_xmm0094410401_pi300-10000_pass1_cl_src3.gif
[Thu Feb 23 02:08:44 2012] Mean detx,y = (883.29, 9099.76) 
[Thu Feb 23 02:08:46 2012] Setting backscal keywords in source and bgd. spectrum
[Thu Feb 23 02:09:13 2012] Binned source spectrum to 10 counts/bin
[Thu Feb 23 02:09:13 2012] Setting source spectrum file to fullrun_mos1_xmm0094410401_pi300-10000_pass1_cl_src3_src_b10.pi.gz
[Thu Feb 23 02:09:13 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0094410401_pi300-10000_pass1_cl_src3_bgd.pi.gz
[Thu Feb 23 02:17:49 2012] Not generating rmf since there are only 50 counts
[Thu Feb 23 02:17:49 2012] rmf not generated due to insufficient counts
[Thu Feb 23 02:25:08 2012] Updating aperture counts using extracted products
[Thu Feb 23 02:25:08 2012] Error reading totcts from fullrun_mos1_xmm0094410401_pi300-10000_pass1_cl_src3_src_b10.pi.gz
[Thu Feb 23 02:25:08 2012] Calculating source flux in energy range 0.30-8.00
[Thu Feb 23 02:25:08 2012] Using photon index=1.80, rate=0.00871, arf fullrun_mos1_xmm0094410401_pi300-10000_pass1_cl_src3.arf
[Thu Feb 23 02:25:08 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Thu Feb 23 02:25:08 2012] Updating source flux to 1.3e-13
[Thu Feb 23 02:25:09 2012] Source 3 has fewer than 100.000000 counts, skipping spectral fitting