[Mon May 20 01:09:33 2013] Detection parameters:
  Position = (432.3, 140.1) = 5 41 6.54 -69 39 50.8
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 42.7 +/- 8.7
  Background counts = 7.7
  Rate = 0.004 +/- 0.0007

[Mon May 20 01:09:34 2013] Off-axis axis estimate = 15.03'
[Mon May 20 01:10:00 2013] Using EEF radius (= 13.95 ")to estimate initial spatial extent for simple fitting
[Mon May 20 01:10:00 2013] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Mon May 20 01:10:00 2013] Initial guess for spatial extent in simple fitting = 13.95"
[Mon May 20 01:10:00 2013] source mask rpix=3.2, npix_max = 54, mask sum = 43, frac = 0.783
[Mon May 20 01:10:00 2013] Giving source the simple spatial ID 15 for pass 0, mean size = 13.95"
[Mon May 20 01:10:01 2013] fullrun_mos2_xmm0094410201_pi300-10000_cl_pass0_src15.ximg exists
[Mon May 20 01:10:01 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0094410201_pi300-10000_cl_pass0_src15.csv
[Mon May 20 01:10:01 2013] fullrun_mos2_xmm0094410201_pi300-10000_cl_pass0_src15_1.ximg exists
[Mon May 20 01:10:01 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0094410201_pi300-10000_cl_pass0_src15.csv
[Mon May 20 01:10:01 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0094410201_pi300-10000_cl_pass0_src15_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0094410201_pi300-10000_cl_pass0_src15.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon May 20 01:10:01 2013] fullrun_mos2_xmm0094410201_pi300-10000_cl_pass0_tfrozen_src15.ximg exists
[Mon May 20 01:10:01 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0094410201_pi300-10000_cl_pass0_tfrozen_src15.csv
[Mon May 20 01:10:01 2013] fullrun_mos2_xmm0094410201_pi300-10000_cl_pass0_tfrozen_src15_1.ximg exists
[Mon May 20 01:10:01 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0094410201_pi300-10000_cl_pass0_tfrozen_src15.csv
[Mon May 20 01:10:01 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0094410201_pi300-10000_cl_pass0_tfrozen_src15_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0094410201_pi300-10000_cl_pass0_tfrozen_src15.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon May 20 01:10:22 2013] Warning, spatial fit 15 centroid is now closest to src. 1
[Mon May 20 01:10:22 2013] Spatial fit model total counts = 188.368000, observed total counts = 177.000000
[Mon May 20 01:10:22 2013] Offset between fit and detection position for source 9 = 3.087074 pixels
[Mon May 20 01:10:22 2013] Warning, changing simple spatial fit ID from 15 to 19
[Mon May 20 01:10:22 2013] 165.329800 total counts/ 12.684800 bgd. counts: snr = 42.858875
Spatial fit parameters:
  Offset between fit and detection position for source 9 = 3.087074 pixels
  Position = (430.7, 142.7) = 5 41 7.95 -69 39 37.4
  Extent = 27.3 (27.3-54.6)", rotation angle = 0
  Source counts = 152.6 +/- 12.9
  Background counts = 12.7
  Rate = 0.01 +/- 0.001
[Mon May 20 01:10:22 2013] Vigneting correction estimate = 1.000000
[Mon May 20 01:10:22 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon May 20 01:10:22 2013] Assessing source extent using major axis lower bound
[Mon May 20 01:10:22 2013] Source does appear to be extended
[Mon May 20 01:10:22 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Mon May 20 01:10:22 2013] Source is confused with source 16
[Mon May 20 01:10:37 2013] Using previous fit value to estimate initial spatial extent for simple fitting
[Mon May 20 01:10:37 2013] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Mon May 20 01:10:37 2013] Initial guess for spatial extent in simple fitting = 27.32"
[Mon May 20 01:10:37 2013] source mask rpix=6.3, npix_max = 183, mask sum = 150, frac = 0.816
[Mon May 20 01:10:37 2013] Giving source the simple spatial ID 15 for pass 1, mean size = 27.32"
[Mon May 20 01:10:38 2013] fullrun_mos2_xmm0094410201_pi300-10000_cl_pass1_src15.ximg exists
[Mon May 20 01:10:38 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0094410201_pi300-10000_cl_pass1_src15.csv
[Mon May 20 01:10:38 2013] fullrun_mos2_xmm0094410201_pi300-10000_cl_pass1_src15_1.ximg exists
[Mon May 20 01:10:38 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0094410201_pi300-10000_cl_pass1_src15.csv
[Mon May 20 01:10:38 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0094410201_pi300-10000_cl_pass1_src15_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0094410201_pi300-10000_cl_pass1_src15.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon May 20 01:10:38 2013] fullrun_mos2_xmm0094410201_pi300-10000_cl_pass1_tfrozen_src15.ximg exists
[Mon May 20 01:10:38 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0094410201_pi300-10000_cl_pass1_tfrozen_src15.csv
[Mon May 20 01:10:38 2013] fullrun_mos2_xmm0094410201_pi300-10000_cl_pass1_tfrozen_src15_1.ximg exists
[Mon May 20 01:10:38 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0094410201_pi300-10000_cl_pass1_tfrozen_src15.csv
[Mon May 20 01:10:38 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0094410201_pi300-10000_cl_pass1_tfrozen_src15_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0094410201_pi300-10000_cl_pass1_tfrozen_src15.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon May 20 01:10:56 2013] Source 9 is offset by -6.146621 and -7.099860 pixels which is larger than
2 X fitted extent = 1.587775 x 1.587775, not incorporating fit results
[Mon May 20 01:10:56 2013] Warning, spatial fit 15 centroid is now closest to src. 2
[Mon May 20 01:10:56 2013] Vigneting correction estimate = 1.000000
[Mon May 20 01:10:56 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon May 20 01:10:56 2013] Assessing source extent using major axis lower bound
[Mon May 20 01:10:56 2013] Source does appear to be extended
[Mon May 20 01:10:56 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Mon May 20 01:14:09 2013] XMMSAS src. selection expression = ellipse(37418.152000, 12366.220200, 1639.368047, 1639.368047, 0.000000, X, Y)
[Mon May 20 01:14:09 2013] Not overwriting source region fullrun_mos2_xmm0094410201_pi300-10000_pass1_cl_src9_src.reg
[Mon May 20 01:14:09 2013] Extracting stamp from image fullrun_mos2_xmm0094410201_pi300-10000_cl_sm2.00.img.gz, (336, 48) - (525, 237)
[Mon May 20 01:14:09 2013] XMMSAS bgd. selection expression = annulus(37418.152000, 12366.220200, 2732.280079, 5464.560157, X, Y) && !ellipse(39077.049835, 14044.487106, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(38278.325624, 13704.157553, 556.952016, 447.543240, 233.877205, X, Y) && !ellipse(34138.979431, 13705.269943, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(37479.173553, 15578.357269, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35790.632800, 11742.373320, 1000.808029, 1000.808029, 0.000000, X, Y) && !ellipse(36447.025604, 16630.160400, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(39465.944200, 16265.261000, 638.188818, 638.188818, 0.000000, X, Y) && !ellipse(35314.313600, 16061.638600, 682.337620, 241.843207, 326.602000, X, Y) && !ellipse(38700.768463, 15594.282135, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34609.020508, 12153.726578, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(36294.664093, 11438.113876, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(39945.981380, 15330.581600, 390.493611, 390.493611, 0.000000, X, Y) && !ellipse(34282.323400, 15010.287400, 599.784017, 599.784017, 0.000000, X, Y) && !ellipse(35789.534149, 10662.225372, 870.000000, 870.000000, 0.000000, X, Y)
[Mon May 20 01:14:09 2013] Writing fullrun_mos2_xmm0094410201_pi300-10000_pass1_cl_src9.gif
[Mon May 20 01:14:09 2013] ../../xmm0094410201/products/events/fullrun_mos2_xmm0094410201_pi300-10000_pass1_cl_src9_src.evt and ../../xmm0094410201/products/events/fullrun_mos2_xmm0094410201_pi300-10000_pass1_cl_src9_bgd.evt exist, delete to re-create
[Mon May 20 01:14:09 2013] Mean detx,y = (4252.15, 15506.29) 
[Mon May 20 01:14:09 2013] ../../xmm0094410201/products/images/fullrun_mos2_xmm0094410201_pi300-10000_pass1_cl_src9_src.img and ../../xmm0094410201/products/images/fullrun_mos2_xmm0094410201_pi300-10000_pass1_cl_src9_bgd.img exist, delete to re-create
[Mon May 20 01:14:09 2013] ../../xmm0094410201/products/spectra/fullrun_mos2_xmm0094410201_pi300-10000_pass1_cl_src9_src_b10.pi.gz and ../../xmm0094410201/products/spectra/fullrun_mos2_xmm0094410201_pi300-10000_pass1_cl_src9_bgd.pi exist, delete to re-create
[Mon May 20 01:14:09 2013] Setting source spectrum file to fullrun_mos2_xmm0094410201_pi300-10000_pass1_cl_src9_src_b10.pi.gz
[Mon May 20 01:14:09 2013] Setting bgd. spectrum file to fullrun_mos2_xmm0094410201_pi300-10000_pass1_cl_src9_bgd.pi.gz
[Mon May 20 01:14:09 2013] ../../xmm0094410201/products/lightcurves/fullrun_mos2_xmm0094410201_pi300-10000_pass1_cl_src9_src.lc and ../../xmm0094410201/products/lightcurves/fullrun_mos2_xmm0094410201_pi300-10000_pass1_cl_src9_bgd.lc exist, delete to re-create
[Mon May 20 01:14:15 2013] fullrun_mos2_xmm0094410201_pi300-10000_pass1_cl_src9.rmf exists, delete to re-create
[Mon May 20 01:14:15 2013] fullrun_mos2_xmm0094410201_pi300-10000_pass1_cl_src9.arf exists, delete to re-create
[Mon May 20 01:14:47 2013] Updating aperture counts using extracted products
[Mon May 20 01:14:47 2013] Total counts from fullrun_mos2_xmm0094410201_pi300-10000_pass1_cl_src9_src_b10.pi.gz = 378.00
[Mon May 20 01:14:47 2013] Total counts from fullrun_mos2_xmm0094410201_pi300-10000_pass1_cl_src9_bgd.pi.gz = 973.00
[Mon May 20 01:14:47 2013] Got source and background scale factors 5281416.000000, 18996110.000000
[Mon May 20 01:14:47 2013] User source parameters:
  Position = (430.7, 142.7) = 5 41 7.95 -69 39 37.4
  Extent = 27.3 (27.3-54.6)", rotation angle = 0
  Source aperture counts = 107.5 +/- 20.5
  Background aperture counts = 270.5
  Rate = 0.009 +/- 0.002

[Mon May 20 01:14:49 2013] Calculating source flux in energy range 0.30-8.00
[Mon May 20 01:14:49 2013] Using photon index=1.80, rate=0.0129, arf fullrun_mos2_xmm0094410201_pi300-10000_pass1_cl_src9.arf
[Mon May 20 01:14:49 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Mon May 20 01:14:49 2013] Updating source flux to 5.3e-13
[Mon May 20 01:14:53 2013] Flag b found in src. 9 procflags, skipping spectral fitting
[Mon May 20 01:14:53 2013] Flag c found in src. 9 procflags, skipping spectral fitting
[Mon May 20 01:14:55 2013] xmm0094410201/analysis//spectral/fullrun_mos2_xmm0094410201_pi300-10000_pass1_cl_src9_pl.csv not found, spectral fit skipped or did not complete