[Mon May 20 01:09:33 2013] Detection parameters:
  Position = (460.1, 177.0) = 5 40 43.62 -69 37 5.2
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 34.5 +/- 8.0
  Background counts = 6.4
  Rate = 0.003 +/- 0.0007

[Mon May 20 01:09:34 2013] Off-axis axis estimate = 14.66'
[Mon May 20 01:10:00 2013] Using EEF radius (= 13.76 ")to estimate initial spatial extent for simple fitting
[Mon May 20 01:10:00 2013] Initial guess for spatial extent in simple fitting = 13.76"
[Mon May 20 01:10:00 2013] source mask rpix=3.2, npix_max = 53, mask sum = 50, frac = 0.932
[Mon May 20 01:10:00 2013] Giving source the simple spatial ID 22 for pass 0, mean size = 13.76"
[Mon May 20 01:10:01 2013] fullrun_mos2_xmm0094410201_pi300-10000_cl_pass0_src22.ximg exists
[Mon May 20 01:10:01 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0094410201_pi300-10000_cl_pass0_src22.csv
[Mon May 20 01:10:01 2013] fullrun_mos2_xmm0094410201_pi300-10000_cl_pass0_src22_1.ximg exists
[Mon May 20 01:10:01 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0094410201_pi300-10000_cl_pass0_src22.csv
[Mon May 20 01:10:01 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0094410201_pi300-10000_cl_pass0_src22_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0094410201_pi300-10000_cl_pass0_src22.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon May 20 01:10:01 2013] fullrun_mos2_xmm0094410201_pi300-10000_cl_pass0_tfrozen_src22.ximg exists
[Mon May 20 01:10:01 2013] fullrun_mos2_xmm0094410201_pi300-10000_cl_pass0_tfrozen_src22_1.ximg exists
[Mon May 20 01:10:01 2013] Fit fullrun_mos2_xmm0094410201_pi300-10000_cl_pass0_tfrozen_src22 appears to have run properly
[Mon May 20 01:10:22 2013] Source 7 is offset by -2.071592 and 1.781222 pixels which is larger than
2 X fitted extent = 1.587775 x 1.587775, not incorporating fit results
[Mon May 20 01:10:22 2013] Spatial fit model total counts = 92.213900, observed total counts = 95.000000
[Mon May 20 01:10:22 2013] Offset between fit and detection position for source 7 = 0.474155 pixels
[Mon May 20 01:10:22 2013] 82.903800 total counts/ 52.436200 bgd. counts: snr = 4.207486
Spatial fit parameters:
  Offset between fit and detection position for source 7 = 0.474155 pixels
  Position = (459.7, 176.8) = 5 40 43.97 -69 37 8.1
  Extent = 4.9 (3.9-6.7)", rotation angle = 0
  Source counts = 30.5 +/- 9.1
  Background counts = 52.4
  Rate = 0.003 +/- 0.0008
[Mon May 20 01:10:22 2013] Vigneting correction estimate = 1.000000
[Mon May 20 01:10:22 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon May 20 01:10:22 2013] Assessing source extent using major axis lower bound
[Mon May 20 01:10:22 2013] Source does appear to be extended
[Mon May 20 01:10:22 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Mon May 20 01:10:37 2013] Using previous fit value to estimate initial spatial extent for simple fitting
[Mon May 20 01:10:37 2013] Initial guess for spatial extent in simple fitting = 4.88"
[Mon May 20 01:10:37 2013] source mask rpix=1.1, npix_max = 10, mask sum = 9, frac = 0.855
[Mon May 20 01:10:37 2013] Giving source the simple spatial ID 20 for pass 1, mean size = 4.88"
[Mon May 20 01:10:38 2013] fullrun_mos2_xmm0094410201_pi300-10000_cl_pass1_src20.ximg exists
[Mon May 20 01:10:38 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0094410201_pi300-10000_cl_pass1_src20.csv
[Mon May 20 01:10:38 2013] fullrun_mos2_xmm0094410201_pi300-10000_cl_pass1_src20_1.ximg exists
[Mon May 20 01:10:38 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0094410201_pi300-10000_cl_pass1_src20.csv
[Mon May 20 01:10:38 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0094410201_pi300-10000_cl_pass1_src20_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0094410201_pi300-10000_cl_pass1_src20.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon May 20 01:10:38 2013] fullrun_mos2_xmm0094410201_pi300-10000_cl_pass1_tfrozen_src20.ximg exists
[Mon May 20 01:10:38 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0094410201_pi300-10000_cl_pass1_tfrozen_src20.csv
[Mon May 20 01:10:38 2013] fullrun_mos2_xmm0094410201_pi300-10000_cl_pass1_tfrozen_src20_1.ximg exists
[Mon May 20 01:10:38 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0094410201_pi300-10000_cl_pass1_tfrozen_src20.csv
[Mon May 20 01:10:38 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0094410201_pi300-10000_cl_pass1_tfrozen_src20_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0094410201_pi300-10000_cl_pass1_tfrozen_src20.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon May 20 01:10:56 2013] Warning, spatial fit 20 centroid is now closest to src. 5
[Mon May 20 01:10:56 2013] Vigneting correction estimate = 1.000000
[Mon May 20 01:10:56 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon May 20 01:10:56 2013] Assessing source extent using major axis lower bound
[Mon May 20 01:10:56 2013] Source does appear to be extended
[Mon May 20 01:10:56 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Mon May 20 01:14:09 2013] XMMSAS src. selection expression = ellipse(39945.981380, 15330.581600, 292.870208, 292.870208, 0.000000, X, Y)
[Mon May 20 01:14:09 2013] Not overwriting source region fullrun_mos2_xmm0094410201_pi300-10000_pass1_cl_src7_src.reg
[Mon May 20 01:14:09 2013] Extracting stamp from image fullrun_mos2_xmm0094410201_pi300-10000_cl_sm2.00.img.gz, (443, 160) - (477, 194)
[Mon May 20 01:14:09 2013] XMMSAS bgd. selection expression = annulus(39945.981380, 15330.581600, 488.117014, 976.234028, X, Y) && !ellipse(39077.049835, 14044.487106, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(39465.944200, 16265.261000, 638.188818, 638.188818, 0.000000, X, Y) && !ellipse(38700.768463, 15594.282135, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(37418.152000, 12366.220200, 2185.824063, 2185.824063, 0.000000, X, Y)
[Mon May 20 01:14:09 2013] Writing fullrun_mos2_xmm0094410201_pi300-10000_pass1_cl_src7.gif
[Mon May 20 01:14:09 2013] ../../xmm0094410201/products/events/fullrun_mos2_xmm0094410201_pi300-10000_pass1_cl_src7_src.evt and ../../xmm0094410201/products/events/fullrun_mos2_xmm0094410201_pi300-10000_pass1_cl_src7_bgd.evt exist, delete to re-create
[Mon May 20 01:14:09 2013] Mean detx,y = (8104.18, 14501.58) 
[Mon May 20 01:14:09 2013] ../../xmm0094410201/products/images/fullrun_mos2_xmm0094410201_pi300-10000_pass1_cl_src7_src.img and ../../xmm0094410201/products/images/fullrun_mos2_xmm0094410201_pi300-10000_pass1_cl_src7_bgd.img exist, delete to re-create
[Mon May 20 01:14:09 2013] ../../xmm0094410201/products/spectra/fullrun_mos2_xmm0094410201_pi300-10000_pass1_cl_src7_src_b10.pi.gz and ../../xmm0094410201/products/spectra/fullrun_mos2_xmm0094410201_pi300-10000_pass1_cl_src7_bgd.pi exist, delete to re-create
[Mon May 20 01:14:09 2013] Setting source spectrum file to fullrun_mos2_xmm0094410201_pi300-10000_pass1_cl_src7_src_b10.pi.gz
[Mon May 20 01:14:09 2013] Setting bgd. spectrum file to fullrun_mos2_xmm0094410201_pi300-10000_pass1_cl_src7_bgd.pi.gz
[Mon May 20 01:14:09 2013] ../../xmm0094410201/products/lightcurves/fullrun_mos2_xmm0094410201_pi300-10000_pass1_cl_src7_src.lc and ../../xmm0094410201/products/lightcurves/fullrun_mos2_xmm0094410201_pi300-10000_pass1_cl_src7_bgd.lc exist, delete to re-create
[Mon May 20 01:14:15 2013] Not generating rmf since there are only 30 counts
[Mon May 20 01:14:15 2013] rmf not generated due to insufficient counts
[Mon May 20 01:14:15 2013] fullrun_mos2_xmm0094410201_pi300-10000_pass1_cl_src7.arf exists, delete to re-create
[Mon May 20 01:14:48 2013] Updating aperture counts using extracted products
[Mon May 20 01:14:48 2013] Total counts from fullrun_mos2_xmm0094410201_pi300-10000_pass1_cl_src7_src_b10.pi.gz = 33.00
[Mon May 20 01:14:48 2013] Total counts from fullrun_mos2_xmm0094410201_pi300-10000_pass1_cl_src7_bgd.pi.gz = 9.00
[Mon May 20 01:14:48 2013] Got source and background scale factors 234737.000000, 354792.000000
[Mon May 20 01:14:48 2013] User source parameters:
  Position = (459.7, 176.8) = 5 40 43.97 -69 37 8.1
  Extent = 4.9 (3.9-6.7)", rotation angle = 0
  Source aperture counts = 27.0 +/- 6.8
  Background aperture counts = 6.0
  Rate = 0.002 +/- 0.0006

[Mon May 20 01:14:50 2013] Calculating source flux in energy range 0.30-8.00
[Mon May 20 01:14:50 2013] Using photon index=1.80, rate=0.00258, arf fullrun_mos2_xmm0094410201_pi300-10000_pass1_cl_src7.arf
[Mon May 20 01:14:50 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Mon May 20 01:14:50 2013] Updating source flux to 2.1e-13
[Mon May 20 01:14:53 2013] Flag b found in src. 7 procflags, skipping spectral fitting
[Mon May 20 01:14:53 2013] Source 7 has fewer than 100.000000 counts, skipping spectral fitting
[Mon May 20 01:14:55 2013] xmm0094410201/analysis//spectral/fullrun_mos2_xmm0094410201_pi300-10000_pass1_cl_src7_pl.csv not found, spectral fit skipped or did not complete