[Mon May 20 01:09:33 2013] Detection parameters:
  Position = (412.0, 135.1) = 5 41 23.49 -69 40 11.9
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 54.7 +/- 10.5
  Background counts = 8.7
  Rate = 0.005 +/- 0.0009

[Mon May 20 01:09:34 2013] Off-axis axis estimate = 14.42'
[Mon May 20 01:10:00 2013] Using EEF radius (= 13.64 ")to estimate initial spatial extent for simple fitting
[Mon May 20 01:10:00 2013] Initial guess for spatial extent in simple fitting = 13.64"
[Mon May 20 01:10:00 2013] source mask rpix=3.1, npix_max = 52, mask sum = 64, frac = 1.211
[Mon May 20 01:10:00 2013] Giving source the simple spatial ID 9 for pass 0, mean size = 13.64"
[Mon May 20 01:10:00 2013] fullrun_mos2_xmm0094410201_pi300-10000_cl_pass0_src9.ximg exists
[Mon May 20 01:10:00 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0094410201_pi300-10000_cl_pass0_src9.csv
[Mon May 20 01:10:00 2013] fullrun_mos2_xmm0094410201_pi300-10000_cl_pass0_src9_1.ximg exists
[Mon May 20 01:10:00 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0094410201_pi300-10000_cl_pass0_src9.csv
[Mon May 20 01:10:00 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0094410201_pi300-10000_cl_pass0_src9_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0094410201_pi300-10000_cl_pass0_src9.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon May 20 01:10:01 2013] fullrun_mos2_xmm0094410201_pi300-10000_cl_pass0_tfrozen_src9.ximg exists
[Mon May 20 01:10:01 2013] fullrun_mos2_xmm0094410201_pi300-10000_cl_pass0_tfrozen_src9_1.ximg exists
[Mon May 20 01:10:01 2013] Fit fullrun_mos2_xmm0094410201_pi300-10000_cl_pass0_tfrozen_src9 appears to have run properly
[Mon May 20 01:10:22 2013] Warning, spatial fit 9 centroid is now closest to src. 15
[Mon May 20 01:10:22 2013] Warning: source 14 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 11 at 13.959775 pixels away
[Mon May 20 01:10:22 2013] Spatial fit model total counts = 286.952000, observed total counts = 214.000000
[Mon May 20 01:10:22 2013] Poor agreement between spatial fit and data for source 11
It may help to tweak spatial fit manually
Not incorporating fit results
[Mon May 20 01:10:22 2013] Vigneting correction estimate = 1.000000
[Mon May 20 01:10:22 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon May 20 01:10:22 2013] Assessing source extent using major
[Mon May 20 01:10:22 2013] Source does appear to be extended
[Mon May 20 01:10:22 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Mon May 20 01:10:22 2013] Source is confused with source 16
[Mon May 20 01:10:37 2013] Using EEF radius (= 13.64 ")to estimate initial spatial extent for simple fitting
[Mon May 20 01:10:37 2013] Initial guess for spatial extent in simple fitting = 13.64"
[Mon May 20 01:10:37 2013] source mask rpix=3.1, npix_max = 52, mask sum = 64, frac = 1.211
[Mon May 20 01:10:37 2013] Giving source the simple spatial ID 9 for pass 1, mean size = 13.64"
[Mon May 20 01:10:37 2013] fullrun_mos2_xmm0094410201_pi300-10000_cl_pass1_src9.ximg exists
[Mon May 20 01:10:37 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0094410201_pi300-10000_cl_pass1_src9.csv
[Mon May 20 01:10:37 2013] fullrun_mos2_xmm0094410201_pi300-10000_cl_pass1_src9_1.ximg exists
[Mon May 20 01:10:37 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0094410201_pi300-10000_cl_pass1_src9.csv
[Mon May 20 01:10:37 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0094410201_pi300-10000_cl_pass1_src9_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0094410201_pi300-10000_cl_pass1_src9.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon May 20 01:10:38 2013] fullrun_mos2_xmm0094410201_pi300-10000_cl_pass1_tfrozen_src9.ximg exists
[Mon May 20 01:10:38 2013] fullrun_mos2_xmm0094410201_pi300-10000_cl_pass1_tfrozen_src9_1.ximg exists
[Mon May 20 01:10:38 2013] Fit fullrun_mos2_xmm0094410201_pi300-10000_cl_pass1_tfrozen_src9 appears to have run properly
[Mon May 20 01:10:56 2013] Spatial fit model total counts = 209.456000, observed total counts = 207.000000
[Mon May 20 01:10:56 2013] Offset between fit and detection position for source 11 = 0.422184 pixels
[Mon May 20 01:10:56 2013] 171.326100 total counts/ 82.370500 bgd. counts: snr = 9.801385
Spatial fit parameters:
  Offset between fit and detection position for source 11 = 0.422184 pixels
  Position = (411.9, 135.5) = 5 41 23.52 -69 40 9.2
  Extent = 12.5 (8.8-17.4)", rotation angle = 0
  Source counts = 89.0 +/- 13.1
  Background counts = 82.4
  Rate = 0.008 +/- 0.001
[Mon May 20 01:10:56 2013] Vigneting correction estimate = 1.000000
[Mon May 20 01:10:56 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon May 20 01:10:56 2013] Assessing source extent using major axis lower bound
[Mon May 20 01:10:56 2013] Source does appear to be extended
[Mon May 20 01:10:56 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Mon May 20 01:14:09 2013] XMMSAS src. selection expression = ellipse(35790.632800, 11742.373320, 750.606022, 750.606022, 0.000000, X, Y)
[Mon May 20 01:14:09 2013] Not overwriting source region fullrun_mos2_xmm0094410201_pi300-10000_pass1_cl_src11_src.reg
[Mon May 20 01:14:09 2013] Extracting stamp from image fullrun_mos2_xmm0094410201_pi300-10000_cl_sm2.00.img.gz, (369, 92) - (455, 179)
[Mon May 20 01:14:09 2013] XMMSAS bgd. selection expression = annulus(35790.632800, 11742.373320, 1251.010036, 2502.020072, X, Y) && !ellipse(39077.049835, 14044.487106, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(38278.325624, 13704.157553, 556.952016, 447.543240, 233.877205, X, Y) && !ellipse(34138.979431, 13705.269943, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34609.020508, 12153.726578, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(37418.152000, 12366.220200, 2185.824063, 2185.824063, 0.000000, X, Y) && !ellipse(36294.664093, 11438.113876, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35789.534149, 10662.225372, 870.000000, 870.000000, 0.000000, X, Y)
[Mon May 20 01:14:09 2013] Writing fullrun_mos2_xmm0094410201_pi300-10000_pass1_cl_src11.gif
[Mon May 20 01:14:09 2013] ../../xmm0094410201/products/events/fullrun_mos2_xmm0094410201_pi300-10000_pass1_cl_src11_src.evt and ../../xmm0094410201/products/events/fullrun_mos2_xmm0094410201_pi300-10000_pass1_cl_src11_bgd.evt exist, delete to re-create
[Mon May 20 01:14:09 2013] Mean detx,y = (2747.52, 15626.49) 
[Mon May 20 01:14:09 2013] ../../xmm0094410201/products/images/fullrun_mos2_xmm0094410201_pi300-10000_pass1_cl_src11_src.img and ../../xmm0094410201/products/images/fullrun_mos2_xmm0094410201_pi300-10000_pass1_cl_src11_bgd.img exist, delete to re-create
[Mon May 20 01:14:09 2013] ../../xmm0094410201/products/spectra/fullrun_mos2_xmm0094410201_pi300-10000_pass1_cl_src11_src_b10.pi.gz and ../../xmm0094410201/products/spectra/fullrun_mos2_xmm0094410201_pi300-10000_pass1_cl_src11_bgd.pi exist, delete to re-create
[Mon May 20 01:14:09 2013] Setting source spectrum file to fullrun_mos2_xmm0094410201_pi300-10000_pass1_cl_src11_src_b10.pi.gz
[Mon May 20 01:14:09 2013] Setting bgd. spectrum file to fullrun_mos2_xmm0094410201_pi300-10000_pass1_cl_src11_bgd.pi.gz
[Mon May 20 01:14:09 2013] ../../xmm0094410201/products/lightcurves/fullrun_mos2_xmm0094410201_pi300-10000_pass1_cl_src11_src.lc and ../../xmm0094410201/products/lightcurves/fullrun_mos2_xmm0094410201_pi300-10000_pass1_cl_src11_bgd.lc exist, delete to re-create
[Mon May 20 01:14:15 2013] Not generating rmf since there are only 88 counts
[Mon May 20 01:14:15 2013] rmf not generated due to insufficient counts
[Mon May 20 01:14:15 2013] fullrun_mos2_xmm0094410201_pi300-10000_pass1_cl_src11.arf exists, delete to re-create
[Mon May 20 01:14:45 2013] Updating aperture counts using extracted products
[Mon May 20 01:14:45 2013] Total counts from fullrun_mos2_xmm0094410201_pi300-10000_pass1_cl_src11_src_b10.pi.gz = 170.00
[Mon May 20 01:14:45 2013] Total counts from fullrun_mos2_xmm0094410201_pi300-10000_pass1_cl_src11_bgd.pi.gz = 183.00
[Mon May 20 01:14:45 2013] Got source and background scale factors 1776780.000000, 3551515.000000
[Mon May 20 01:14:45 2013] User source parameters:
  Position = (411.9, 135.5) = 5 41 23.52 -69 40 9.2
  Extent = 12.5 (8.8-17.4)", rotation angle = 0
  Source aperture counts = 78.4 +/- 14.1
  Background aperture counts = 91.6
  Rate = 0.007 +/- 0.001

[Mon May 20 01:14:49 2013] Calculating source flux in energy range 0.30-8.00
[Mon May 20 01:14:49 2013] Using photon index=1.80, rate=0.00753, arf fullrun_mos2_xmm0094410201_pi300-10000_pass1_cl_src11.arf
[Mon May 20 01:14:49 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Mon May 20 01:14:49 2013] Updating source flux to 3.1e-13
[Mon May 20 01:14:53 2013] Flag p found in src. 11 procflags, skipping spectral fitting
[Mon May 20 01:14:53 2013] Flag c found in src. 11 procflags, skipping spectral fitting
[Mon May 20 01:14:53 2013] Source 11 has fewer than 100.000000 counts, skipping spectral fitting
[Mon May 20 01:14:55 2013] xmm0094410201/analysis//spectral/fullrun_mos2_xmm0094410201_pi300-10000_pass1_cl_src11_pl.csv not found, spectral fit skipped or did not complete