[Thu May 31 10:11:58 2012] Detection parameters:
  Position = (426.9, 158.1) = 5 40 49.62 -69 13 29.0
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 26.1 +/- 7.3
  Background counts = 5.1
  Rate = 0.002 +/- 0.0006

[Thu May 31 10:11:58 2012] Off-axis axis estimate = 13.79'
[Thu May 31 11:34:14 2012] Using EEF radius (= 13.32 ")to estimate initial spatial extent for simple fitting
[Thu May 31 11:34:14 2012] Initial guess for spatial extent in simple fitting = 13.32"
[Thu May 31 11:34:14 2012] source mask rpix=3.1, npix_max = 50, mask sum = 49, frac = 0.965
[Thu May 31 11:34:14 2012] Giving source the simple spatial ID 12 for pass 0, mean size = 13.32"
[Thu May 31 11:56:44 2012] fullrun_mos2_xmm0094410101_pi300-10000_cl_pass0_src12.ximg exists
[Thu May 31 11:56:44 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0094410101_pi300-10000_cl_pass0_src12.csv
[Thu May 31 11:56:44 2012] fullrun_mos2_xmm0094410101_pi300-10000_cl_pass0_src12_1.ximg exists
[Thu May 31 11:56:44 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0094410101_pi300-10000_cl_pass0_src12.csv
[Thu May 31 11:56:44 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0094410101_pi300-10000_cl_pass0_src12_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0094410101_pi300-10000_cl_pass0_src12.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu May 31 11:56:44 2012] fullrun_mos2_xmm0094410101_pi300-10000_cl_pass0_tfrozen_src12.ximg exists
[Thu May 31 11:56:44 2012] fullrun_mos2_xmm0094410101_pi300-10000_cl_pass0_tfrozen_src12_1.ximg exists
[Thu May 31 11:56:44 2012] Fit fullrun_mos2_xmm0094410101_pi300-10000_cl_pass0_tfrozen_src12 appears to have run properly
[Thu May 31 11:56:52 2012] Warning: source 12 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 12 at 17.150597 pixels away
[Thu May 31 11:56:52 2012] Vigneting correction estimate = 1.000000
[Thu May 31 11:56:52 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu May 31 11:56:52 2012] Assessing source extent using major
[Thu May 31 11:56:52 2012] Source does appear to be extended
[Thu May 31 11:56:52 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu May 31 12:51:25 2012] Using EEF radius (= 13.32 ")to estimate initial spatial extent for simple fitting
[Thu May 31 12:51:25 2012] Initial guess for spatial extent in simple fitting = 13.32"
[Thu May 31 12:51:25 2012] source mask rpix=3.1, npix_max = 50, mask sum = 49, frac = 0.965
[Thu May 31 12:51:25 2012] Giving source the simple spatial ID 10 for pass 1, mean size = 13.32"
[Thu May 31 13:07:37 2012] fullrun_mos2_xmm0094410101_pi300-10000_cl_pass1_src10.ximg exists
[Thu May 31 13:07:37 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0094410101_pi300-10000_cl_pass1_src10.csv
[Thu May 31 13:07:37 2012] fullrun_mos2_xmm0094410101_pi300-10000_cl_pass1_src10_1.ximg exists
[Thu May 31 13:07:37 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0094410101_pi300-10000_cl_pass1_src10.csv
[Thu May 31 13:07:37 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0094410101_pi300-10000_cl_pass1_src10_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0094410101_pi300-10000_cl_pass1_src10.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu May 31 13:07:37 2012] fullrun_mos2_xmm0094410101_pi300-10000_cl_pass1_tfrozen_src10.ximg exists
[Thu May 31 13:07:37 2012] fullrun_mos2_xmm0094410101_pi300-10000_cl_pass1_tfrozen_src10_1.ximg exists
[Thu May 31 13:07:37 2012] Fit fullrun_mos2_xmm0094410101_pi300-10000_cl_pass1_tfrozen_src10 appears to have run properly
[Thu May 31 13:07:44 2012] Spatial fit model total counts = 93.267500, observed total counts = 93.000000
[Thu May 31 13:07:44 2012] Offset between fit and detection position for source 12 = 1.749884 pixels
[Thu May 31 13:07:44 2012] 93.025800 total counts/ 59.429400 bgd. counts: snr = 4.358049
Spatial fit parameters:
  Offset between fit and detection position for source 12 = 1.749884 pixels
  Position = (428.6, 157.9) = 5 40 48.20 -69 13 29.4
  Extent = 10.0 (6.3-15.2)", rotation angle = 0
  Source counts = 33.6 +/- 9.6
  Background counts = 59.4
  Rate = 0.003 +/- 0.0008
[Thu May 31 13:07:44 2012] Vigneting correction estimate = 1.000000
[Thu May 31 13:07:44 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu May 31 13:07:44 2012] Assessing source extent using major axis lower bound
[Thu May 31 13:07:44 2012] Source does appear to be extended
[Thu May 31 13:07:44 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu May 31 13:26:20 2012] XMMSAS src. selection expression = ellipse(37239.534400, 13690.120200, 600.642017, 600.642017, 0.000000, X, Y)
[Thu May 31 13:26:20 2012] Writing source region out to fullrun_mos2_xmm0094410101_pi300-10000_pass1_cl_src12_src.reg
[Thu May 31 13:26:20 2012] Extracting stamp from image fullrun_mos2_xmm0094410101_pi300-10000_cl_sm2.00.img.gz, (394, 123) - (463, 192)
[Thu May 31 13:26:20 2012] XMMSAS bgd. selection expression = annulus(37239.534400, 13690.120200, 1001.070029, 2002.140058, X, Y)
[Thu May 31 13:26:20 2012] Writing fullrun_mos2_xmm0094410101_pi300-10000_pass1_cl_src12.gif
[Thu May 31 13:29:10 2012] Mean detx,y = (4915.15, 14593.63) 
[Thu May 31 13:29:11 2012] Setting backscal keywords in source and bgd. spectrum
[Thu May 31 13:29:26 2012] Binned source spectrum to 10 counts/bin
[Thu May 31 13:29:26 2012] Setting source spectrum file to fullrun_mos2_xmm0094410101_pi300-10000_pass1_cl_src12_src_b10.pi.gz
[Thu May 31 13:29:26 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0094410101_pi300-10000_pass1_cl_src12_bgd.pi.gz
[Thu May 31 13:31:04 2012] Not generating rmf since there are only 33 counts
[Thu May 31 13:31:04 2012] rmf not generated due to insufficient counts
[Thu May 31 13:31:30 2012] Updating aperture counts using extracted products
[Thu May 31 13:31:30 2012] Error reading totcts from fullrun_mos2_xmm0094410101_pi300-10000_pass1_cl_src12_src_b10.pi.gz
[Thu May 31 13:31:31 2012] Calculating source flux in energy range 0.30-8.00
[Thu May 31 13:31:31 2012] Using photon index=1.80, rate=0.00285, arf fullrun_mos2_xmm0094410101_pi300-10000_pass1_cl_src12.arf
[Thu May 31 13:31:31 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Thu May 31 13:31:31 2012] Updating source flux to 9.5e-14
[Thu May 31 13:31:32 2012] Source 12 has fewer than 100.000000 counts, skipping spectral fitting
[Thu May 31 13:31:33 2012] xmm0094410101/analysis//spectral/fullrun_mos2_xmm0094410101_pi300-10000_pass1_cl_src12_pl.csv not found, spectral fit skipped or did not complete