[Mon Aug 27 06:52:22 2012] Detection parameters:
  Position = (318.2, 238.8) = 13 55 56.84 18 19 43.3
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 38.9 +/- 8.1
  Background counts = 9.1
  Rate = 0.002 +/- 0.0004

[Mon Aug 27 06:52:22 2012] Off-axis axis estimate = 4.55'
[Mon Aug 27 08:09:02 2012] Using EEF radius (= 8.71 ")to estimate initial spatial extent for simple fitting
[Mon Aug 27 08:09:02 2012] Initial guess for spatial extent in simple fitting = 8.71"
[Mon Aug 27 08:09:02 2012] source mask rpix=2.0, npix_max = 25, mask sum = 17, frac = 0.679
[Mon Aug 27 08:09:02 2012] Giving source the simple spatial ID 20 for pass 0, mean size = 8.71"
[Mon Aug 27 08:34:30 2012] fullrun_mos2_xmm0094401201_pi300-10000_cl_pass0_src20.ximg exists
[Mon Aug 27 08:34:30 2012] fullrun_mos2_xmm0094401201_pi300-10000_cl_pass0_src20_1.ximg exists
[Mon Aug 27 08:34:30 2012] Fit fullrun_mos2_xmm0094401201_pi300-10000_cl_pass0_src20 appears to have run properly
[Mon Aug 27 08:34:31 2012] fullrun_mos2_xmm0094401201_pi300-10000_cl_pass0_tfrozen_src20.ximg exists
[Mon Aug 27 08:34:31 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0094401201_pi300-10000_cl_pass0_tfrozen_src20.csv
[Mon Aug 27 08:34:31 2012] fullrun_mos2_xmm0094401201_pi300-10000_cl_pass0_tfrozen_src20_1.ximg exists
[Mon Aug 27 08:34:31 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0094401201_pi300-10000_cl_pass0_tfrozen_src20.csv
[Mon Aug 27 08:34:31 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0094401201_pi300-10000_cl_pass0_tfrozen_src20_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0094401201_pi300-10000_cl_pass0_tfrozen_src20.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Aug 27 08:34:46 2012] Warning: source 20 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 16 at 11.268275 pixels away
[Mon Aug 27 08:34:46 2012] Vigneting correction estimate = 1.000000
[Mon Aug 27 08:34:46 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Aug 27 08:34:46 2012] Assessing source extent using major
[Mon Aug 27 08:34:46 2012] Source does appear to be extended
[Mon Aug 27 08:34:46 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Aug 27 09:38:06 2012] Using EEF radius (= 8.71 ")to estimate initial spatial extent for simple fitting
[Mon Aug 27 09:38:06 2012] Initial guess for spatial extent in simple fitting = 8.71"
[Mon Aug 27 09:38:06 2012] source mask rpix=2.0, npix_max = 25, mask sum = 17, frac = 0.679
[Mon Aug 27 09:38:06 2012] Giving source the simple spatial ID 20 for pass 1, mean size = 8.71"
[Mon Aug 27 10:00:27 2012] fullrun_mos2_xmm0094401201_pi300-10000_cl_pass1_src20.ximg exists
[Mon Aug 27 10:00:27 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0094401201_pi300-10000_cl_pass1_src20.csv
[Mon Aug 27 10:00:27 2012] fullrun_mos2_xmm0094401201_pi300-10000_cl_pass1_src20_1.ximg exists
[Mon Aug 27 10:00:27 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0094401201_pi300-10000_cl_pass1_src20.csv
[Mon Aug 27 10:00:27 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0094401201_pi300-10000_cl_pass1_src20_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0094401201_pi300-10000_cl_pass1_src20.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Aug 27 10:00:27 2012] fullrun_mos2_xmm0094401201_pi300-10000_cl_pass1_tfrozen_src20.ximg exists
[Mon Aug 27 10:00:28 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0094401201_pi300-10000_cl_pass1_tfrozen_src20.csv
[Mon Aug 27 10:00:28 2012] fullrun_mos2_xmm0094401201_pi300-10000_cl_pass1_tfrozen_src20_1.ximg exists
[Mon Aug 27 10:00:28 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0094401201_pi300-10000_cl_pass1_tfrozen_src20.csv
[Mon Aug 27 10:00:28 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0094401201_pi300-10000_cl_pass1_tfrozen_src20_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0094401201_pi300-10000_cl_pass1_tfrozen_src20.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Aug 27 10:00:53 2012] Source 16 is offset by -7.765859 and -1.606007 pixels which is larger than
2 X fitted extent = 1.062368 x 1.062368, not incorporating fit results
[Mon Aug 27 10:00:53 2012] Vigneting correction estimate = 1.000000
[Mon Aug 27 10:00:53 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Aug 27 10:00:53 2012] Assessing source extent using major
[Mon Aug 27 10:00:53 2012] Source does appear to be extended
[Mon Aug 27 10:00:53 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Aug 27 10:39:16 2012] XMMSAS src. selection expression = ellipse(27638.278259, 20730.562424, 652.500000, 652.500000, 0.000000, X, Y)
[Mon Aug 27 10:39:16 2012] Writing source region out to fullrun_mos2_xmm0094401201_pi300-10000_pass1_cl_src16_src.reg
[Mon Aug 27 10:39:16 2012] Extracting stamp from image fullrun_mos2_xmm0094401201_pi300-10000_cl_sm2.00.img.gz, (281, 201) - (356, 276)
[Mon Aug 27 10:39:16 2012] XMMSAS bgd. selection expression = annulus(27638.278259, 20730.562424, 1087.500000, 2175.000000, X, Y) && !ellipse(27391.861000, 22599.385400, 347.014410, 347.014410, 0.000000, X, Y)
[Mon Aug 27 10:39:16 2012] Writing fullrun_mos2_xmm0094401201_pi300-10000_pass1_cl_src16.gif
[Mon Aug 27 10:44:17 2012] Mean detx,y = (-313.46, 3652.87) 
[Mon Aug 27 10:44:18 2012] Setting backscal keywords in source and bgd. spectrum
[Mon Aug 27 10:44:27 2012] grppha failed
[Mon Aug 27 10:44:28 2012] Setting source spectrum file to fullrun_mos2_xmm0094401201_pi300-10000_pass1_cl_src16_src.pi.gz
[Mon Aug 27 10:44:28 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0094401201_pi300-10000_pass1_cl_src16_bgd.pi.gz
[Mon Aug 27 10:44:44 2012] Not generating rmf since there are only 38 counts
[Mon Aug 27 10:44:44 2012] rmf not generated due to insufficient counts
[Mon Aug 27 10:45:21 2012] Updating aperture counts using extracted products
[Mon Aug 27 10:45:21 2012] Error reading totcts from fullrun_mos2_xmm0094401201_pi300-10000_pass1_cl_src16_src.pi.gz
[Mon Aug 27 10:45:21 2012] No arf file for this source, not re-computing flux
[Mon Aug 27 10:45:23 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Mon Aug 27 10:45:24 2012] xmm0094401201/analysis//spectral/fullrun_mos2_xmm0094401201_pi300-10000_pass1_cl_src16_pl.csv not found, spectral fit skipped or did not complete