[Mon Aug 27 06:52:00 2012] Detection parameters:
  Position = (363.0, 301.3) = 13 55 43.17 18 24 17.1
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 182.4 +/- 16.5
  Background counts = 7.7
  Rate = 0.01 +/- 0.0009

[Mon Aug 27 06:52:01 2012] Off-axis axis estimate = 4.68'
[Mon Aug 27 07:36:18 2012] Using EEF radius (= 8.77 ")to estimate initial spatial extent for simple fitting
[Mon Aug 27 07:36:18 2012] Initial guess for spatial extent in simple fitting = 8.77"
[Mon Aug 27 07:36:18 2012] source mask rpix=2.0, npix_max = 25, mask sum = 25, frac = 0.987
[Mon Aug 27 07:36:18 2012] Giving source the simple spatial ID 3 for pass 0, mean size = 8.77"
[Mon Aug 27 08:09:01 2012] fullrun_mos1_xmm0094401201_pi300-10000_cl_pass0_src3.ximg exists
[Mon Aug 27 08:09:01 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0094401201_pi300-10000_cl_pass0_src3.csv
[Mon Aug 27 08:09:01 2012] fullrun_mos1_xmm0094401201_pi300-10000_cl_pass0_src3_1.ximg exists
[Mon Aug 27 08:09:01 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0094401201_pi300-10000_cl_pass0_src3.csv
[Mon Aug 27 08:09:01 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0094401201_pi300-10000_cl_pass0_src3_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0094401201_pi300-10000_cl_pass0_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Aug 27 08:09:01 2012] fullrun_mos1_xmm0094401201_pi300-10000_cl_pass0_tfrozen_src3.ximg exists
[Mon Aug 27 08:09:01 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0094401201_pi300-10000_cl_pass0_tfrozen_src3.csv
[Mon Aug 27 08:09:01 2012] fullrun_mos1_xmm0094401201_pi300-10000_cl_pass0_tfrozen_src3_1.ximg exists
[Mon Aug 27 08:09:01 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0094401201_pi300-10000_cl_pass0_tfrozen_src3.csv
[Mon Aug 27 08:09:01 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0094401201_pi300-10000_cl_pass0_tfrozen_src3_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0094401201_pi300-10000_cl_pass0_tfrozen_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Aug 27 08:34:43 2012] Spatial fit model total counts = 316.094000, observed total counts = 227.000000
[Mon Aug 27 08:34:43 2012] Poor agreement between spatial fit and data for source 4
It may help to tweak spatial fit manually
Not incorporating fit results
[Mon Aug 27 08:34:43 2012] Vigneting correction estimate = 1.000000
[Mon Aug 27 08:34:43 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Aug 27 08:34:43 2012] Assessing source extent using major
[Mon Aug 27 08:34:43 2012] Source does appear to be extended
[Mon Aug 27 08:34:43 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Aug 27 09:12:32 2012] Using EEF radius (= 8.77 ")to estimate initial spatial extent for simple fitting
[Mon Aug 27 09:12:32 2012] Initial guess for spatial extent in simple fitting = 8.77"
[Mon Aug 27 09:12:32 2012] source mask rpix=2.0, npix_max = 25, mask sum = 25, frac = 0.987
[Mon Aug 27 09:12:32 2012] Giving source the simple spatial ID 3 for pass 1, mean size = 8.77"
[Mon Aug 27 09:38:05 2012] fullrun_mos1_xmm0094401201_pi300-10000_cl_pass1_src3.ximg exists
[Mon Aug 27 09:38:05 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0094401201_pi300-10000_cl_pass1_src3.csv
[Mon Aug 27 09:38:05 2012] fullrun_mos1_xmm0094401201_pi300-10000_cl_pass1_src3_1.ximg exists
[Mon Aug 27 09:38:05 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0094401201_pi300-10000_cl_pass1_src3.csv
[Mon Aug 27 09:38:05 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0094401201_pi300-10000_cl_pass1_src3_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0094401201_pi300-10000_cl_pass1_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Aug 27 09:38:05 2012] fullrun_mos1_xmm0094401201_pi300-10000_cl_pass1_tfrozen_src3.ximg exists
[Mon Aug 27 09:38:05 2012] fullrun_mos1_xmm0094401201_pi300-10000_cl_pass1_tfrozen_src3_1.ximg exists
[Mon Aug 27 09:38:05 2012] Fit fullrun_mos1_xmm0094401201_pi300-10000_cl_pass1_tfrozen_src3 appears to have run properly
[Mon Aug 27 10:00:48 2012] Spatial fit model total counts = 238.752000, observed total counts = 227.000000
[Mon Aug 27 10:00:48 2012] Offset between fit and detection position for source 4 = 0.214707 pixels
[Mon Aug 27 10:00:48 2012] 237.213000 total counts/ 96.045000 bgd. counts: snr = 14.404523
Spatial fit parameters:
  Offset between fit and detection position for source 4 = 0.214707 pixels
  Position = (362.8, 301.5) = 13 55 43.21 18 24 17.4
  Extent = 5.8 (4.9-6.6)", rotation angle = 0
  Source counts = 141.2 +/- 15.4
  Background counts = 96.0
  Rate = 0.005 +/- 0.0006
[Mon Aug 27 10:00:48 2012] Vigneting correction estimate = 1.000000
[Mon Aug 27 10:00:48 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Aug 27 10:00:48 2012] Assessing source extent using major axis lower bound
[Mon Aug 27 10:00:48 2012] Source does appear to be extended
[Mon Aug 27 10:00:48 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Aug 27 10:32:13 2012] XMMSAS src. selection expression = ellipse(31516.405100, 26178.344200, 347.209210, 347.209210, 0.000000, X, Y)
[Mon Aug 27 10:32:13 2012] Writing source region out to fullrun_mos1_xmm0094401201_pi300-10000_pass1_cl_src4_src.reg
[Mon Aug 27 10:32:13 2012] Extracting stamp from image fullrun_mos1_xmm0094401201_pi300-10000_cl_sm2.00.img.gz, (343, 282) - (383, 321)
[Mon Aug 27 10:32:13 2012] XMMSAS bgd. selection expression = annulus(31516.405100, 26178.344200, 578.682017, 1157.364033, X, Y) && !ellipse(32097.826400, 25095.781000, 404.121612, 404.121612, 0.000000, X, Y) && !ellipse(29865.012000, 25467.430000, 1329.056038, 1329.056038, 0.000000, X, Y)
[Mon Aug 27 10:32:13 2012] Writing fullrun_mos1_xmm0094401201_pi300-10000_pass1_cl_src4.gif
[Mon Aug 27 10:32:41 2012] Mean detx,y = (1517.77, -6145.32) 
[Mon Aug 27 10:32:42 2012] Setting backscal keywords in source and bgd. spectrum
[Mon Aug 27 10:32:58 2012] grppha failed
[Mon Aug 27 10:32:58 2012] Setting source spectrum file to fullrun_mos1_xmm0094401201_pi300-10000_pass1_cl_src4_src.pi.gz
[Mon Aug 27 10:32:58 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0094401201_pi300-10000_pass1_cl_src4_bgd.pi.gz
[Mon Aug 27 10:45:20 2012] Updating aperture counts using extracted products
[Mon Aug 27 10:45:20 2012] Error reading totcts from fullrun_mos1_xmm0094401201_pi300-10000_pass1_cl_src4_src.pi.gz
[Mon Aug 27 10:45:21 2012] No arf file for this source, not re-computing flux
[Mon Aug 27 10:45:22 2012] Flag p found in src. 4 procflags, skipping spectral fitting
[Mon Aug 27 10:45:22 2012] Source 4 has no response, skipping
[Mon Aug 27 10:45:23 2012] xmm0094401201/analysis//spectral/fullrun_mos1_xmm0094401201_pi300-10000_pass1_cl_src4_pl.csv not found, spectral fit skipped or did not complete