[Mon Aug 27 06:52:01 2012] Detection parameters:
  Position = (297.4, 282.7) = 13 56 3.20 18 22 56.5
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 56.0 +/- 10.7
  Background counts = 9.7
  Rate = 0.002 +/- 0.0004

[Mon Aug 27 06:52:01 2012] Off-axis axis estimate = 1.14'
[Mon Aug 27 07:36:18 2012] Using EEF radius (= 7.00 ")to estimate initial spatial extent for simple fitting
[Mon Aug 27 07:36:18 2012] Initial guess for spatial extent in simple fitting = 7.00"
[Mon Aug 27 07:36:18 2012] source mask rpix=1.6, npix_max = 17, mask sum = 20, frac = 1.124
[Mon Aug 27 07:36:18 2012] Giving source the simple spatial ID 17 for pass 0, mean size = 7.00"
[Mon Aug 27 08:09:01 2012] fullrun_mos1_xmm0094401201_pi300-10000_cl_pass0_src17.ximg exists
[Mon Aug 27 08:09:01 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0094401201_pi300-10000_cl_pass0_src17.csv
[Mon Aug 27 08:09:01 2012] fullrun_mos1_xmm0094401201_pi300-10000_cl_pass0_src17_1.ximg exists
[Mon Aug 27 08:09:01 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0094401201_pi300-10000_cl_pass0_src17.csv
[Mon Aug 27 08:09:01 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0094401201_pi300-10000_cl_pass0_src17_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0094401201_pi300-10000_cl_pass0_src17.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Aug 27 08:09:01 2012] fullrun_mos1_xmm0094401201_pi300-10000_cl_pass0_tfrozen_src17.ximg exists
[Mon Aug 27 08:09:01 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0094401201_pi300-10000_cl_pass0_tfrozen_src17.csv
[Mon Aug 27 08:09:01 2012] fullrun_mos1_xmm0094401201_pi300-10000_cl_pass0_tfrozen_src17_1.ximg exists
[Mon Aug 27 08:09:01 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0094401201_pi300-10000_cl_pass0_tfrozen_src17.csv
[Mon Aug 27 08:09:01 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0094401201_pi300-10000_cl_pass0_tfrozen_src17_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0094401201_pi300-10000_cl_pass0_tfrozen_src17.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Aug 27 08:34:43 2012] Spatial fit model total counts = 237.305000, observed total counts = 480.000000
[Mon Aug 27 08:34:43 2012] Poor agreement between spatial fit and data for source 18
It may help to tweak spatial fit manually
Not incorporating fit results
[Mon Aug 27 08:34:43 2012] Vigneting correction estimate = 1.000000
[Mon Aug 27 08:34:43 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Aug 27 08:34:43 2012] Assessing source extent using major
[Mon Aug 27 08:34:43 2012] Source does appear to be extended
[Mon Aug 27 08:34:43 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Aug 27 09:12:32 2012] Using EEF radius (= 7.00 ")to estimate initial spatial extent for simple fitting
[Mon Aug 27 09:12:32 2012] Initial guess for spatial extent in simple fitting = 7.00"
[Mon Aug 27 09:12:32 2012] source mask rpix=1.6, npix_max = 17, mask sum = 20, frac = 1.124
[Mon Aug 27 09:12:32 2012] Giving source the simple spatial ID 17 for pass 1, mean size = 7.00"
[Mon Aug 27 09:38:05 2012] fullrun_mos1_xmm0094401201_pi300-10000_cl_pass1_src17.ximg exists
[Mon Aug 27 09:38:05 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0094401201_pi300-10000_cl_pass1_src17.csv
[Mon Aug 27 09:38:05 2012] fullrun_mos1_xmm0094401201_pi300-10000_cl_pass1_src17_1.ximg exists
[Mon Aug 27 09:38:05 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0094401201_pi300-10000_cl_pass1_src17.csv
[Mon Aug 27 09:38:05 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0094401201_pi300-10000_cl_pass1_src17_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0094401201_pi300-10000_cl_pass1_src17.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Aug 27 09:38:05 2012] fullrun_mos1_xmm0094401201_pi300-10000_cl_pass1_tfrozen_src17.ximg exists
[Mon Aug 27 09:38:05 2012] fullrun_mos1_xmm0094401201_pi300-10000_cl_pass1_tfrozen_src17_1.ximg exists
[Mon Aug 27 09:38:05 2012] Fit fullrun_mos1_xmm0094401201_pi300-10000_cl_pass1_tfrozen_src17 appears to have run properly
[Mon Aug 27 10:00:48 2012] Source 18 is offset by -1.105592 and 6.117221 pixels which is larger than
2 X fitted extent = 3.419264 x 3.419264, not incorporating fit results
[Mon Aug 27 10:00:48 2012] Vigneting correction estimate = 1.000000
[Mon Aug 27 10:00:48 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Aug 27 10:00:48 2012] Assessing source extent using major
[Mon Aug 27 10:00:48 2012] Source does appear to be extended
[Mon Aug 27 10:00:48 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Aug 27 10:32:13 2012] XMMSAS src. selection expression = ellipse(25827.126129, 24544.622192, 652.500000, 652.500000, 0.000000, X, Y)
[Mon Aug 27 10:32:13 2012] Writing source region out to fullrun_mos1_xmm0094401201_pi300-10000_pass1_cl_src18_src.reg
[Mon Aug 27 10:32:13 2012] Extracting stamp from image fullrun_mos1_xmm0094401201_pi300-10000_cl_sm2.00.img.gz, (260, 245) - (335, 320)
[Mon Aug 27 10:32:13 2012] XMMSAS bgd. selection expression = annulus(25827.126129, 24544.622192, 1087.500000, 2175.000000, X, Y) && !ellipse(25929.752400, 23785.213000, 492.062414, 492.062414, 0.000000, X, Y) && !ellipse(27429.540700, 22652.357600, 443.732813, 443.732813, 0.000000, X, Y) && !ellipse(25439.683014, 27285.990387, 870.000000, 870.000000, 0.000000, X, Y)
[Mon Aug 27 10:32:13 2012] Writing fullrun_mos1_xmm0094401201_pi300-10000_pass1_cl_src18.gif
[Mon Aug 27 10:36:46 2012] Mean detx,y = (-65.20, -409.32) 
[Mon Aug 27 10:36:47 2012] Setting backscal keywords in source and bgd. spectrum
[Mon Aug 27 10:36:57 2012] grppha failed
[Mon Aug 27 10:36:57 2012] Setting source spectrum file to fullrun_mos1_xmm0094401201_pi300-10000_pass1_cl_src18_src.pi.gz
[Mon Aug 27 10:36:57 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0094401201_pi300-10000_pass1_cl_src18_bgd.pi.gz
[Mon Aug 27 10:39:14 2012] Not generating rmf since there are only 55 counts
[Mon Aug 27 10:39:14 2012] rmf not generated due to insufficient counts
[Mon Aug 27 10:45:21 2012] Updating aperture counts using extracted products
[Mon Aug 27 10:45:21 2012] Error reading totcts from fullrun_mos1_xmm0094401201_pi300-10000_pass1_cl_src18_src.pi.gz
[Mon Aug 27 10:45:21 2012] No arf file for this source, not re-computing flux
[Mon Aug 27 10:45:22 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Mon Aug 27 10:45:23 2012] xmm0094401201/analysis//spectral/fullrun_mos1_xmm0094401201_pi300-10000_pass1_cl_src18_pl.csv not found, spectral fit skipped or did not complete